Oxfordshire · England
Fire-rated sealant in Bledington, Oxfordshire
Problem with your fire-stopping gaps in Bledington? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Open joints along the top of partitions
- Open gaps behind door architraves
- Ordinary sealant used where a fire-rated product was needed
What we cannot put right
It helps to know what we can’t do too:
- Doors that aren’t fire doors in the first place
- Openings too large for sealant, which need batts, boards or another system
- Certifying a building or signing off its fire safety
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Service penetrations
- Door frames
- Pipe & cable gaps
- Plasterboard & masonry
- Flats & HMOs
- Linear gaps
Fire rated sealant in Bledington
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap. We work on door frames, plasterboard & masonry and service penetrations, and the jobs we see most are gaps left after a refit or conversion and gaps where walls meet ceilings or slabs.
For holiday lets, converted business premises or a community building near Bledington, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
You’re covered for a year from the day we finish. If anything isn’t right with it, call 0345 464 0079 or drop us an email.
- Place
- Bledington (OX7)
- Region
- Oxfordshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Also in Bledington
Should I try it myself first?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Bledington: your questions answered
Will you come out to Bledington?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
I let a flat near Kingham station. Can you help?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Is there a guarantee?
Yes. Every job comes with our 12-month guarantee.
What do you need from me for a quote?
A short description and the location. If we need more, we will ask.
Do you have insurance?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
How long does fire rated sealant take?
Typically it takes anything from a few hours to several days, depending on how many gaps there are. Larger jobs naturally take longer, and we’ll say how long yours will take.
Quotes for fire rated sealant in Bledington
Call for a quick quote. The main things that affect it are:
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- Any working-time requirements on site
- Whether old sealant or filler has to be cut out
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Helping us quote
There’s no need for technical detail. Just tell us:
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- How we’d reach the joints
Asking for a quote is easy: let us know what needs doing and where. Photos by email help us understand the job.
Commercial buildings in Bledington
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
For landlords with property near Kingham station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. If you look after a church, hall or community building such as Church of St Leonard, older buildings that have had new heating or wiring often have service gaps worth checking.
Bledington is about 10 miles north of Carterton, in Oxfordshire. Whether you’re in the middle of Bledington or further out, fire rated sealant is available for homes and businesses alike. Bledington is one of 443 places in Oxfordshire where we work. Oxford is on our list too, around 20 miles away.
Every address in OX7 is within our area for fire rated sealant. If you need fire rated sealant at a property on Main Street, Station Road and Old Forge Close or a nearby road, we can help. Other places close to Bledington include Kingham (1 mile north-east). Within a short drive, we also cover Witney (10 miles south-east), Carterton (10 miles south), Chipping Norton (5 miles north-east), Woodstock (13 miles east), Cogges (11 miles south-east) and Bloxham (14 miles north-east).
Local landmarks in Bledington
Bledington’s nearest station is Kingham station, roughly 0.6 miles east. Other landmarks nearby include Moore Cottage Hospital (4.9 miles west) and Park House Toy Collectors Museum (3.7 miles north-west).
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
If you manage several properties in or around Bledington, several properties can go on one quote. Send us the addresses and the work at each.
Surface by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We seal them along their full length.
Flats and HMOs
Working in occupied flats needs some planning. We agree access to each flat and the common parts before we start so residents know what to expect.
How the visit works
When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work starts. The work usually takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Bledington needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Preparing for the visit
- Keep pets and children clear of the area while we work
- On commercial sites, let us know about site rules
- Mention any tricky access
Get a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or drop us an email.
Advice
What we are called out for in Bledington
Many open fire-stopping gaps are made after the building is finished. Electricians, plumbers and data installers drill through walls and ceilings and the hole round the new service is not always sealed again.
Keep an eye out for these signs:
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
- Holes left by a change of layout
- Unsealed gaps where pipes and cables go through a wall
For site and facilities teams at buildings such as Bledington Primary School, fire-stopping around service openings should be restored whenever new services go in.
Before you book anyone
- Who turns up on the day
- How the joint is cleaned and prepared
- What the quote includes, VAT included or not
- Which colour the sealant will be