Kent · England
Bexon Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Bexon, with a 12-month guarantee on every job. Call for a quick quote.
- Fire stopping disturbed by later work
- Standard silicone or caulk in a fire-stopping gap
- Unsealed gaps around fire door frames
About our fire rated sealant in Bexon
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. Each gap is sealed to the product maker’s tested detail for its size and substrate. We work on door frames, plasterboard & masonry and linear gaps, and common reasons people get in touch are gaps filled with a product that isn’t fire-rated and gaps where walls meet ceilings or slabs.
For holiday lets, converted business premises or a community building near Bexon, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
You get a 12-month guarantee, the same in Bexon as everywhere else we work.
- Where
- Bexon (ME9)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Landlord and commercial work in Bexon
For anyone letting property in or around Bexon, several properties can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
In hotels, rooms out of use cost money, so the work can be planned room by room. We have worked in hotels as well as homes and businesses.
Towns and villages near Bexon
What else we do in Bexon
Honest limits
Before you book, it’s worth knowing the limits too:
- Issuing a fire rating or certificate for a building
- Walls or floors that weren’t built to resist fire
- Deciding what fire stopping a building needs
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.
Where we work in Bexon
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
- Service penetrations
- Linear gaps
- Door frames
What fire rated sealant looks like in Bexon
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Letting a property close to Sittingbourne station? Then any gap left by new services in shared walls should be closed with a fire-rated product. If you look after a church, hall or community building such as Church of St John the Baptist, gaps around pipes and cables are worth checking after any building work there. Schools such as Bredgar Church of England Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices.
Bexon is about 3 miles south of Sittingbourne, in Kent. For fire rated sealant in and around Bexon, please ring 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover Kent. Across Kent, we cover 922 places, and Bexon is one of them. We also work in Chelmsford, around 31 miles away.
Postcode districts we cover here for fire rated sealant: ME9. Neighbouring places we cover for fire rated sealant include Tunstall (1 mile north), Dungate (2 miles east), Highsted (2 miles north-east), Heart's Delight (2 miles north) and Rodmersham Green (2 miles north-east). Within a short drive, we also cover Maidstone (8 miles west), Ashford (13 miles south-east), Sittingbourne (3 miles north), Whitstable (14 miles east), Faversham (8 miles east) and Minster (9 miles north-east).
Around Bexon
Around Bexon, our work takes us to homes and buildings near Cromers Wood and Fulston Manor School and the streets around them. For rail, the closest station is Sittingbourne station, about 2.9 miles north of the centre. A little further out are Sittingbourne Heritage Museum (2.8 miles north-east) and Bayford Court (3.1 miles north-east).
Why act early in Bexon
Squirting in whichever sealant is nearest doesn’t make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. Older cottages and farmhouses around Bexon can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
What it costs depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before we start.
Why us?
- Quality sealants from Arbo and Everbuild
- Fully insured
- Over 20 years’ experience
- We leave the area clean and tidy
Take a look at what affects the cost and what customers say.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so just mention it when you contact us.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Different surfaces, different methods
Linear gaps
Long, narrow gaps appear where walls meet slabs and ceilings. We seal them to the tested detail, with backing where it’s needed.
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Bexon: your questions answered
Do you work for landlords with property near Sittingbourne station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Will you come out to Bexon?
Yes, Bexon is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is it worth trying it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
How long will you be here?
Typically it takes from a few hours to a few days, depending on the number of gaps and the access. Larger jobs naturally take longer.
Do you guarantee your work?
Yes. Every job comes with a 12-month guarantee.
Is there any odour?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
Are you insured?
Yes, we’re fully insured for every job we do.
Can you match the sealant colour?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.
How we quote for fire rated sealant
The price is agreed before any work begins. It takes into account:
- The size of the job
- How easy the joints are to reach
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
Doing several joints on one visit generally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- Roughly how big the job is
- If someone has resealed it before
- If it’s domestic, commercial or a hotel
- The problem you’ve noticed
For a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear price before any work starts.
How it works
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the job takes a few hours for a handful of gaps, and longer for a whole building for a typical job. Somewhere as small as Bexon, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Before we arrive
- Keep children and pets away from the work area
- Let us know about earlier repairs to the joints
- Mention any sign-in or site rules at work premises
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, call 0345 464 0079 or send us an email.