Kent · England
Fire-rated sealant in Berwick, Kent
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Berwick, with a one-year guarantee on every job. Call for a quick quote.
- Ordinary sealant used where a fire-rated product was needed
- Seals cut through by electricians, plumbers or data installers
- New service routes left unsealed after building work
Questions from Berwick
Can you help a landlord with a rental near Westenhanger station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or send us an email with the details for a clear quote.
Is Berwick within the area you cover?
Yes, Berwick is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can I use normal mastic around a pipe through a fire wall?
No. Where a fire-rated seal is needed, it has to be a product tested for that use, installed to its details.
Can you work in occupied buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we will plan the work to suit.
Is it OK to seal over old sealant?
No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.
Can you tell me how many minutes the seal will last?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and giving you a record of where it went.
Do you offer different sealant colours?
We will suggest a colour to suit the surroundings. The product needed can limit the range.
How do I get a quote for fire rated sealant in Berwick?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or email us with a short description of the job.
Fire rated sealant for homes and businesses in Berwick
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, and we can record what went where. We work on service penetrations, linear gaps and door frames, and people most often call us about gaps flagged on a fire risk assessment and open holes round services passing through fire walls.
Somewhere as small as Berwick, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
A 12-month guarantee comes as standard.
- Where
- Berwick (CT21)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
There’s no need to move everything out, only the area right around the joints. We protect the rest, and the work takes a few hours for a handful of gaps, and longer for a whole building for a typical job. For a village or hamlet like Berwick, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Where the joints are inside, avoid wetting them before we arrive
- Mention any tricky access
Getting a quote
If you’re in Berwick and need fire rated sealant, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.
Read more
Aftercare tips
So the new joints stay in good condition:
- Allow for resealing whenever new services are run
- Take photos of fire stopping before ceilings or boxing go back
- Tell trades working in the building that fire seals must be put back
- Check whether a sealant can be painted before decorating over it
Avoid covering a sealed gap with anything that is not part of the tested detail. Repairs should use a matching fire-rated product. Ask us if you’re not sure which product was used.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the list grows.
When to call us in Berwick
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
People generally contact us when they notice one of these:
- Gaps left after a refit or conversion
- Linear gaps at the head of walls
- Unsealed gaps where pipes and cables go through a wall
- Joints picked up in a fire-stopping survey
Community buildings like Church of St Stephen are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
What your quote should include
- Whether they’re fully insured
- What guarantee comes with the work
- Is the old sealant removed completely?
- When the joint can take water or movement
When something else is needed
Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:
- Construction that doesn’t provide fire resistance on its own
- Problems with the door itself rather than the gap around the frame
- Large holes that need a different fire-stopping system
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before booking.
What we seal
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Door frames
What fire rated sealant looks like in Berwick
If you run a hotel, guest house or holiday let in a coastal place like Berwick, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Managing a site like Lympne Church of England Primary School? Then service openings in fire-resisting walls need checking after any refurbishment. Rented homes near Westenhanger station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Berwick is about 2 miles west of Hythe, in Kent. We provide fire rated sealant to homeowners, landlords and businesses in Berwick and the surrounding area, as part of our work across Kent. Across Kent, we cover 922 places, and Berwick is one of them. You can also see our page for Chelmsford, roughly 51 miles from Berwick.
We cover every part of CT21 for fire rated sealant. Local streets include Stone Street, Folks Wood Way and Honeywood Close, all of which we cover. Other places close to Berwick include Lympne (1 mile south-west), Newingreen (1 mile north-east), Westenhanger (1 mile north), West Hythe (1 mile south) and Pedlinge (1 mile east). Within a short drive, we also cover Ashford (8 miles north-west), Canterbury (14 miles north), Dover (12 miles east), Folkestone (6 miles east), Tower Hamlets (12 miles east) and Hawkinge (6 miles east).
Local landmarks in Berwick
Typical jobs here are in homes near Brockhill Park Performing Arts College, Sandling Park and The Royal Oak Public House. For rail, the closest station is Westenhanger station, about 1 mile north of the centre. Well-known places in the area include Lympne Castle (0.7 miles south-west) and Hythe Museum (2.4 miles east). For a walk, there’s Tolsford Hill.
DIY versus a professional finish
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
How the job changes by surface
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before applying the sealant.
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
What affects the cost of fire rated sealant
For a quick quote, just ask. The main things that affect it are:
- How easy the joints are to reach
- The amount of work
- The old material and how stubborn it is
- Whether there’s mould to deal with
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and agree the price before starting.
What to tell us for a quote
What to tell us when you ask for a quote:
- The rough size of the job
- The type of property
- What the problem is, such as mould, gaps, leaks or cracking
- Where the property is
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.