Windsor and Maidenhead · England
External & façade joints in Pinkneys Green, Windsor and Maidenhead
External mastic for Pinkneys Green, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Movement joints filled with mortar instead of sealant
- Plants rooting in failed movement joints
- Failed sealant between panels on a façade
Outside joints around Pinkneys Green
With historic houses such as Harleyford Manor (about 2.6 miles north-west) nearby, there’s older building stock in the area around Pinkneys Green as well as newer homes. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In the older streets around Church of St. James the Less, an extension built onto an older house moves differently, and the joint between them takes the strain. If you look after a building such as Courthouse Junior School, its movement joints, gutters and trims need looking after like any other building’s.
Pinkneys Green is about 1 mile north-west of Maidenhead, in Windsor and Maidenhead. Whether you’re in the middle of Pinkneys Green or further out, we cover external mastic for every kind of property. Across Windsor and Maidenhead, we cover 57 places, Pinkneys Green among them. Our Reading page covers work nearby, about 11 miles away.
Every address in SL6 is covered for external mastic. External mastic is available to properties on Lee Lane, Bix Lane and Edith Road. We also cover the places around Pinkneys Green: Stubbings (1 mile west), Furze Platt (1 mile east), Maidenhead (1 mile south-east), Holloway (1 mile south-west) and Burchett's Green (1 mile west). Further out, we also cover Windsor (7 miles south-east), North Ascot (8 miles south), Dedworth (6 miles south-east), Broomhall (11 miles south-east), South Ascot (10 miles south-east) and Old Windsor (9 miles south-east).
Near you in Pinkneys Green
Typical jobs here are in homes near St Piran's School, Newlands Girls' School and The Robin Hood pub, among other places. The closest station to Pinkneys Green is Furze Platt station, roughly 1.4 miles east. Other landmarks nearby include St Mark's Hospital (0.8 miles south-east) and The Reitlinger Bequest Museum (2.5 miles east). Open spaces near Pinkneys Green include Taplow Lake and Carpenter's Wood.
External mastic for homes and businesses in Pinkneys Green
Short cuts in external joints show up within a season or two. Overfilled joints, missing backing rod and sealant laid over old sealant all tend to fail early. We take the old material out and do it properly. We work on concrete & block, render & cladding joints and brickwork movement joints, and common reasons people get in touch are joints where the bead has come unstuck and moss and dirt in joints with no sealant left.
Homes around Pinkneys Green range from older cottages to newer houses, with walls and rooflines of every type. Older homes need their gutter and trim joints kept tight, newer ones their movement joints.
Each job carries a 12-month guarantee.
- Location
- Pinkneys Green (SL6)
- Wider area
- Windsor and Maidenhead
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Nearby places to Pinkneys Green
Other services in Pinkneys Green
Signs you need external mastic in Pinkneys Green
Sometimes a movement joint was filled with mortar or a rigid filler by mistake. With the joint locked solid, the movement turns into cracks elsewhere in the wall.
Common reasons people contact us include:
- Leaking joints around cladding and façade panels
- Sealant pulling away from one side of the joint
- Hard, crazed mastic that has stopped moving
- Movement joints with cracked, split or missing sealant
If you let a flat or house near Furze Platt station, outside joints that have cracked can let damp into a rental, so check them between lets.
Questions to ask before you book
- Whether they seal over old material or remove it
- Which sealant they’ll use, and why
- How long to leave it before use
- What insurance they hold
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Landlord and commercial work in Pinkneys Green
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured for the work.
Why it’s worth doing now in Pinkneys Green
A low-modulus sealant is chosen because it moves without pulling hard at the edges. That protects surfaces like brick, render and concrete. Too stiff a sealant can pull at the edges and break them. In an older home around Pinkneys Green, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we will explain what it covers.
Why book with us
- Colour agreed with you before we start
- 4.9 on Google from 180+ five-star reviews
- One-year guarantee on every job
- 20+ years of sealant experience
Read our cost guide and what customers say.
The process
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours to a few days, depending on the length of joint and the access. Parking around Pinkneys Green is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- First, the joints are inspected and the access agreed.
- We cut out the old mastic and rake out anything in the joint.
- The faces are brushed clean and primed where the product requires it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Clear items away from the joints we are working on
- Try not to wet indoor joints just before the visit
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, phone 0345 464 0079 or send us an email.
Advice
What the job involves on each surface
Concrete and blockwork
The face of concrete or block is often dusty, so preparation is key. We prime where the sealant needs it before the bead.
Cladding and façade panels
Cladding and façade panels are usually separated by sealed joints. We reseal them with a sealant suited to the panel material.
How to look after the new joints
To keep the joints looking good and working properly:
- Leave the joints unpainted unless we’ve said otherwise
- Get split or bare joints resealed while the damage is small
- Check external joints each spring
- Make sure movement joints aren’t pointed over
Look over the joints once a year, ideally after winter. Splits, gaps at the edges or plants in the joint are early warning signs.
Act while the splits are small. At that stage it’s a simple cut out and reseal.
Common questions in Pinkneys Green
Do you work for landlords with property near Furze Platt station?
Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.
Is Pinkneys Green in your area for external mastic?
Yes. We work across London and the South East, and Pinkneys Green is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Can you seal joints between render and window frames?
Yes. Where different materials meet is one of the most common joints we seal. We use a flexible sealant suited to both surfaces with primer where required.
How long before the joint can be used?
It depends on the product and the temperature. Before we leave, we’ll tell you the cure time.
Will the old sealant be removed?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Is there a guarantee?
Yes, always. Each job is guaranteed for twelve months.
Can you do several jobs on one visit?
Yes, we can. More than one area can be quoted together.
What information do you need?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply phone 0345 464 0079 or email us.