Essex · England
External Mastic in Little Burstead
Sealing brickwork movement joints, render, cladding and façade joints for Little Burstead, backed by a one-year guarantee. Ask us for a quote.
- Joints where the bead has come unstuck
- Weathered mastic that no longer stretches
- Failed seals between different materials
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Keep soil, plants and ivy away from the joints
- Walk round the building once a year and look at the joints
- Keep water from gutters off the wall
- Have failed joints looked at early
Keep the joints clear of soil, plants and climbing growth. Anything that holds water against the joint wears it out sooner.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.
How we handle external mastic in Little Burstead
Getting the depth right is half the job. Closed-cell backing rod sets the depth and stops the sealant sticking to the back, leaving it bonded to two faces so it can move with the wall. We work on façade panels, concrete & block and copings & trims, and people most often call us about moss and dirt in joints with no sealant left and rain getting behind render or cladding at a joint.
Around Little Burstead, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points.
Whatever the size of the job, you get the same 12-month guarantee.
- Location
- Little Burstead (CM12)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Quotes
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
When something else is needed
Before you book, it’s worth knowing the limits:
- Cracked brickwork or render that needs a builder or plasterer
- Failed render or damaged cladding panels
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
If in doubt, ring 0345 464 0079 or drop us an email and we will say what we think before you book.
Surfaces we seal
- Copings & trims
- Brickwork movement joints
- Joints between brick and frames
- Concrete & block
- Façade panels
- Render & cladding joints
Places near Little Burstead
What else we do in Little Burstead
External mastic in Little Burstead: local notes
Historic houses like Ingatestone Hall (about 4 miles north) are a reminder that the area around Little Burstead has older buildings as well as new. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you let a flat or house near Billericay station, failed wall and movement joints let damp in, so they’re worth checking between tenancies. Homes close to Church of St Mary include some older properties, and old and new materials meet at the roofline and walls, which is where sealant earns its keep. For site and facilities teams at buildings such as South Green Junior School, larger buildings have long runs of movement joint that eventually need resealing.
Little Burstead is about 2 miles south of Billericay, in Essex. Our applicators cover external mastic for homes and businesses in Little Burstead and nearby. Little Burstead is one of 644 places in Essex where we work. Our Chelmsford page covers work nearby, about 10 miles away.
Postcode districts we cover here for external mastic: CM12. If you need external mastic at a property on Broomhills Chase, Laindon Common Road and Clock House Road or a nearby road, our applicators can take on the job. Other places close to Little Burstead include Great Burstead (1 mile east), Billericay (2 miles north), Crays Hill (3 miles east), Ramsden Bellhouse (3 miles east) and Ramsden Heath (3 miles north-east). Within a short drive, we also cover Chelmsford (10 miles north), Basildon (3 miles south-east), Brentwood (5 miles west), Maldon (14 miles north-east), Canvey Island (9 miles south-east) and Rayleigh (8 miles east).
What’s near Little Burstead
In Little Burstead, that means homes and buildings near The Billericay School and the streets around them. The nearest railway station is Billericay station, roughly 1.7 miles north. Well-known places in the area include Eastgate Shopping Centre (3.2 miles south-east) and Mayflower Community Hospital (1.2 miles north). Not far away are Norsey Wood.
Little Burstead questions
Do you cover Little Burstead for external mastic?
Yes. We work across London and the South East, and Little Burstead is part of that. You can ring 0345 464 0079 or email us and tell us what needs doing, and we will send you a clear quote.
Do you cover smaller places like Little Burstead?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
What colours does the sealant come in?
We choose a sealant colour to suit the brick, stone or render. There’s a wide choice of exterior colours.
Which products do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference.
How do you reach high-level joints?
It depends on the height and the site. Low-level joints are straightforward; for higher ones, send details and we’ll confirm the access.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Do the sealants smell?
Some sealants have a smell while they cure. Ventilation helps.
Are you insured?
Yes, we are fully insured for every job we do.
What the job involves on each surface
Brickwork movement joints
Clay brickwork grows slightly over its life and moves with the weather. The movement joint takes that up, so the sealant in it must stay soft and stretchy.
Concrete and blockwork
Concrete faces can be dusty and porous, so preparation is key. A primer goes on where the product requires one.
Why deal with it now?
An open joint keeps letting water into the wall with every downpour. Wet masonry is more easily damaged by frost, so the damage spreads beyond the joint. In a small place like Little Burstead, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will send you a clear quote for the lot.
Why book with us
- Colour picked to suit the job
- Quality sealants from Arbo and Everbuild
- Every job guaranteed for a year
- White, clear, grey or another colour, product permitting
See what affects the cost and what customers say.
Landlord and commercial work in Little Burstead
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
How the visit works
Our applicators work methodically: protect, prepare, seal, tidy. Typically it takes a few hours for a handful of joints, longer for a whole elevation and we leave things clean and tidy. For a village or hamlet like Little Burstead, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First, the joints are inspected and the access agreed.
- Every bit of old sealant and any mortar or debris is cut out.
- Joint faces are cleaned back and primed if the sealant needs it.
- Backing rod sized to the joint goes in to set the depth.
- The exterior sealant is applied, tooled and checked along its length.
How to prepare
- Let us know about earlier repairs to the joints
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
Getting a quote
Want a quote for external mastic? Please phone 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and give you a clear quote before we start.
Read more
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.