Essex · England
External & façade joints in Ingatestone, Essex
Problem with your movement joints in Ingatestone? We cut out the old, prepare the joints and apply the right sealant.
- Old sealant gone brittle and cracked
- Failed sealant between panels on a façade
- Sealant pulling away from one side of the joint
For landlords and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
How we handle external mastic in Ingatestone
Joints between dissimilar materials, like brick against render or concrete against a steel frame, see movement from both sides. A flexible exterior sealant takes up that movement. If you are dealing with leaking joints around cladding and façade panels and cracked joints where brick meets render or frames, we can put it right.
Outbuildings, garages and conservatories around homes in places like Ingatestone add more joints to look after. Leaks usually start at a gutter end, a garage door frame or where an extension meets the house.
Every job comes with our one-year guarantee, wherever you are in Essex.
- Where
- Ingatestone (CM4)
- Region
- Essex
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
When to call us in Ingatestone
If plants are growing out of a joint, the sealant has normally failed or was never there. Roots and dirt hold water against the wall and speed up the damage.
Look out for these signs:
- Failed seals between different materials
- Movement joints filled with mortar instead of sealant
- Sealant that has lost its bond to the brick or render
- Leaking joints around cladding and façade panels
For an older house near a landmark such as Church of St Edmund and St Mary, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Comparing quotes
- Is the old sealant removed completely?
- When the joint can take water or movement
- Whether you can choose the colour
- Who turns up on the day
Places near Ingatestone
What else we do in Ingatestone
What happens on the day
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes a few hours for a handful of joints, longer for a whole elevation, and the area is left clean. Parking around Ingatestone is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- Each joint is checked and the colour of the new sealant agreed.
- Failed sealant is removed back to clean, sound faces.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
Getting ready for the visit
- Mention any tricky access
- Plan for the work area to be out of bounds to pets and children
- Move anything stored near the joints
Ask for a quote
To get a quote, ring 0345 464 0079 or send us an email with the location and a short description of the problem. You will have a clear quote before any work starts.
Read more
Questions from Ingatestone
Can you help a landlord with a rental near Ingatestone station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before work begins.
Is Ingatestone in your area for external mastic?
Yes, Ingatestone is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Can you seal over the old sealant?
No, and we never do. It may look fine at first, but the new layer lifts away from the old one. The old sealant has to come out completely.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Can you seal joints between render and window frames?
Yes. We cut out the old sealant, prepare both faces and reseal with a flexible exterior product. The colour is chosen to suit.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Can you match the colour of my brickwork?
We aim for a joint that suits the wall rather than one that jumps out. We’ll talk through colour options before we start from the range available.
What the job involves on each surface
Joints between dissimilar materials
Wherever two materials meet, they move differently. We seal the joint with a flexible exterior sealant.
Render joints
Cracks along render joints let water in behind the coat. Resealing the joints early keeps water out.
What affects the quote in Ingatestone
Call for a quick quote. What matters most is:
- How many areas need sealing
- The amount of work
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
Combining jobs into one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. We will give you a clear quote for the lot.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- Whether it’s a home or a business
- Roughly how big the job is
- The address or postcode of the job
- Any previous sealing or DIY work
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you’re ready, call 0345 464 0079 or email us.
Walls and rooflines in Ingatestone
Historic houses like Ingatestone Hall (about 0.7 miles south-east) are a reminder that the area around Ingatestone has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Letting a property close to Ingatestone station? Then split movement joints are easy to miss on a rental until damp shows inside. Schools such as Ingatestone Infant School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing.
Ingatestone is about 3 miles north-west of Billericay, in Essex. From the centre of Ingatestone to the outskirts, we cover external mastic for every kind of property, from flats and houses to offices and hotels. Ingatestone is one of 644 places in Essex where we work for external mastic. For nearby work, see our Chelmsford page, about 7 miles away.
Work in CM4 is quoted and booked the same way as anywhere else. We cover properties on Market Place, High Street and The Furlongs. Ingatestone is on the B1002, so it’s easy for us to get to. Neighbouring places we cover for external mastic include Fryerning (1 mile north), Mill Green (1 mile north), Green Street (1 mile west), Buttsbury (1 mile south) and Beggar Hill (1 mile north-west). Within a short drive, we also cover Chelmsford (7 miles north-east), Basildon (8 miles south-east), Harlow (13 miles north-west), Brentwood (4 miles south-west), Maldon (14 miles east) and Canvey Island (13 miles south-east).
Near you in Ingatestone
In Ingatestone, that means homes and buildings near Anglo European School and The Bell Inn, among other places. There’s a railway station in Ingatestone itself: Ingatestone station. Nearby you’ll also find Mayflower Community Hospital (3.5 miles south). Not far away are Norsey Wood.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Why it’s worth doing now in Ingatestone
A low-modulus sealant is chosen because it moves without pulling hard at the edges. That protects surfaces like brick, render and concrete. A stiffer product can damage the joint edge as it fails. Around Ingatestone, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why Ingatestone customers choose us
- We leave the area clean and tidy
- ARBOMaster approved applicator
- Colour picked to suit the job
- Full insurance on every job