Essex · England
External & façade joints in Fuller's End, Essex
Sealing brickwork movement joints, render, cladding and façade joints for householders, landlords and businesses in Fuller's End. Fully insured, ARBOMaster approved and guaranteed for a year.
- Hard, crazed mastic that has stopped moving
- Rain getting behind render or cladding at a joint
- Joints where the bead has come unstuck
Landlords, agents and businesses in Fuller's End
For anyone letting property in or around Fuller's End, several properties can be quoted together. Just tell us the addresses and what each one needs.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can be quoted together.
External mastic in Fuller's End
Failed sealant is cut out, the depth set with closed-cell backing rod, and the joint resealed with a low-modulus sealant made for outside. The colour is chosen to suit the brick or render. If you have cracked joints where brick meets render or frames and damp patches traced to an open external joint, we can help.
Older homes in small places like Fuller's End may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Fuller's End (CM22)
- Region
- Essex
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Copings and trims
Joints in copings, parapets and trims are exposed to the worst of the weather. Each is resealed with a weatherproof, flexible sealant.
Render joints
Render has movement joints and stop beads that need sealing. They’re resealed in a sealant that suits the render.
Common problems we fix in Fuller's End
A lot of failed joints come down to preparation: joint faces that were dusty or damp, unprimed where they needed it, or still carrying old sealant. The new sealant then lets go long before it should.
These are the problems we are asked about most:
- Plants rooting in failed movement joints
- Panel joints letting water in
- Gaps where render, brick and frames meet
- Joints pointed up with cement by mistake
For an older house near a landmark such as Church of St Mary the Virgin, older walls, gutters and the joints where extensions meet them need a flexible sealant.
What to look for in a quote
- How long to leave it before use
- What the quote includes, VAT included or not
- How long the guarantee is
- How the colour is chosen
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Avoid pressure-washing directly into sealant joints
- Get split or bare joints resealed while the damage is small
- Check the sealant is paintable before painting near it
- Fix overflowing gutters above sealed joints
Avoid pressure-washing straight into the joints. A strong jet can damage the edges of the bead over time.
Small splits are the time to act. At that stage it’s a simple cut out and reseal with no damage behind it to deal with.
External mastic in Fuller's End: local notes
Historic houses like Horham Hall (about 4 miles north-east) are a reminder that the area around Fuller's End has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For landlords with property near Elsenham station, outside joints that have cracked can let damp into a rental, so check them between lets. Managing a site like Forest Hall School? Then its movement joints, gutters and trims need looking after like any other building’s.
Fuller's End is about 4 miles north-east of Bishop's Stortford, in Essex. From the centre of Fuller's End to the outskirts, external mastic is available for homes and businesses alike. Fuller's End is one of 644 places in Essex where we work for external mastic. You can also see our page for Chelmsford, roughly 16 miles from Fuller's End.
Work in CM22 works the same way as everywhere else we cover. We also cover the places around Fuller's End: Elsenham (1 mile north-west), Ugley Green (1 mile north-west), Henham (2 miles north-east), Brick End (2 miles east) and Ugley (2 miles north-west). We also work in nearby towns such as Braintree (14 miles east), Harlow (11 miles south-west), Saffron Walden (8 miles north), Great Dunmow (6 miles south-east), Epping (15 miles south) and Great Notley (13 miles east).
What’s near Fuller's End
In Fuller's End, that means homes and buildings near Robin Hood Public House, among other places. Fuller's End’s nearest station is Elsenham station, about 0.8 miles north. Other landmarks nearby include House On The Hill Toy Museum (1.3 miles west) and Herts and Essex Hospital (3.9 miles south-west). For a walk, there’s Portingbury Hills and Aubrey Buxton Nature Reserve.
Leave it or put it right?
The longer a joint stays open, the more water the wall takes in. In cold weather, frost can damage wet brick and render near the open joint, so the problem grows beyond the joint itself. In a small place like Fuller's End, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first.
Why Fuller's End clients choose us
- Domestic, commercial and hotel work
- You choose the colour before work begins
- Arbo and Everbuild products
- 20+ years of sealant experience
Read how sealant jobs are priced and customer reviews.
Fuller's End: your questions answered
Do you cover smaller places like Fuller's End?
Yes. Fuller's End is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do external mastic in Fuller's End?
Yes, Fuller's End is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
When will the joints need doing again?
It varies with how exposed the wall is and how much the joint moves. Look for splits, hardening or edges coming away and have them redone then.
How long before the joint can be used?
Different products cure at different speeds, so follow the cure time we give you.
How long does the job take?
A typical job takes a few hours to a few days, depending on the length of joint and the access. We will confirm how long when we quote.
Why is there a gap in my brick wall?
Walls move with heat, cold and moisture, and planned joints take up that movement. The gap is sealed with a flexible sealant over backing rod.
Is there a guarantee?
Yes: twelve months. If anything is not right with the work within the year, let us know and we will sort it.
Are you insured?
Yes. We are fully insured.
What happens on the day
We bring everything the job needs with us. After a quick look at the joints together, the area is protected and the work begins. Most jobs take a few hours for a handful of joints, longer for a whole elevation. In a small place like Fuller's End, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, the joints are inspected and the access agreed.
- We cut out the old mastic and rake out anything in the joint.
- The faces are brushed clean and primed where the product requires it.
- We fit closed-cell backing rod to control the depth.
- We apply the sealant, tool it and check the whole run.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Mention any leaks or damp you’ve noticed
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
To get a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. We’ll send you a clear quote before any work starts.
Related advice
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.