Oxfordshire · England
External & façade joints in Freeland, Oxfordshire
External mastic across Freeland and nearby, with every bit of old sealant taken out first.
- Sealant that has lost its bond to the brick or render
- Leaking joints around cladding and façade panels
- Rain getting behind render or cladding at a joint
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Walls that need new movement joints cut into them
- Render that’s blown, hollow or coming away
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
Where we work in Freeland
- Concrete & block
- Copings & trims
- Façade panels
- Render & cladding joints
- Brickwork movement joints
- Joints between brick and frames
External mastic for homes and businesses in Freeland
Joints between dissimilar materials, like brick against render or concrete against a steel frame, see movement from both sides. A flexible exterior sealant takes up that movement where a rigid filler would soon crack. Common call-outs are for joints pointed up with cement by mistake and sealant that has lost its bond to the brick or render, across brickwork movement joints, render & cladding joints and joints between brick and frames.
External sealant needs dry, clean surfaces, so work around Freeland is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
Every job comes with a one-year guarantee.
- Where
- Freeland (OX29)
- Wider area
- Oxfordshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Looking after it afterwards
So the new joints stay in good condition:
- Get split or bare joints resealed while the damage is small
- Keep high-pressure jets off the joints
- Ask before painting over external sealant
- Fix overflowing gutters above sealed joints
Look over the joints once a year, ideally after winter. Splits, gaps at the edges or plants in the joint are early warning signs.
Leaks behind façade panels and render often go unseen. When it finally shows inside, the joint may have been open for years.
How the job changes by surface
Cladding and façade panels
Cladding and façade panels are generally separated by sealed joints. We reseal them with a sealant suited to the panel material.
Joints between dissimilar materials
Each side of the joint may need its own preparation. Both surfaces are cleaned and primed as the product requires.
Places near Freeland
More services for Freeland
Why deal with it now?
Mortar or ordinary filler might look like a quick way to close an open joint, but it locks the joint solid. The wall then cracks somewhere else. A flexible sealant over backing rod is what the joint needs. Where a wall is exposed, as many are in small places like Freeland, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear quote for the lot.
Why us?
- Fully insured
- Anti-fungal sanitary silicone in wet areas
- An ARBOMaster approved applicator
- A choice of colours where the product allows
See what affects the cost and what customers say.
How it works
There’s no need to move everything out before we come, just the space around the work. We protect the rest, and the job takes anything from a few hours to several days, depending on the building in most cases. In a small place like Freeland, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking each joint, agreeing the ones to redo and how we will reach them.
- The old mastic and anything lodged in the joint is removed.
- Both sides are cleaned back to sound material and primed if needed.
- Closed-cell backing rod is fitted to set the depth and stop three-sided bonding.
- We gun in a flexible exterior sealant in a colour that suits the wall and tool it neatly.
Getting ready for the visit
- Keep pets and children clear of the area while we work
- Move anything stored near the joints
- Let us know if you’ve seen damp or leaks
Get a quote
Want a quote for external mastic? Please call 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Questions from Freeland
Is Freeland within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Combe station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
What should I tell you?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply ring 0345 464 0079 or email us.
Can a movement joint be filled with mortar?
No. A mortar-filled joint can’t move, so the wall cracks somewhere else instead. Use a flexible sealant with backing rod.
Does someone need to be in?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we’re using.
Is it OK to seal over old sealant?
No. Fresh sealant doesn’t stick to old sealant, and it traps any mould or water underneath. We remove it all first.
Landlords, agents and businesses in Freeland
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
What external mastic looks like in Freeland
Historic houses like Blenheim Palace (about 2.6 miles north-east) are a reminder that the area around Freeland has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Schools such as Freeland Church of England Primary School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. In the older streets around Church of St Mary, the joints between older walls, newer extensions and the roofline need a sealant that can move. If you let a flat or house near Combe station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Freeland is about 4 miles north-east of Witney, in Oxfordshire. Jobs in Freeland get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Freeland is one of 443 places in Oxfordshire where we work. Oxford is on our list too, about 9 miles from Freeland.
We cover every part of the OX29 postcode area for external mastic and the streets around it. Local streets include Hurst Lane, Nash Lane and Wroslyn Road, and we cover them all. Neighbouring places we cover for external mastic include East End (1 mile north-west), North Leigh (2 miles west), Combe (2 miles north), New Yatt (2 miles west) and Stonesfield (3 miles north). Further out, we also cover Oxford (9 miles south-east), Bicester (12 miles north-east), Abingdon-on-Thames (11 miles south-east), Witney (4 miles south-west), Carterton (9 miles west) and Wantage (15 miles south).
Around Freeland
In Freeland, that means homes and buildings near The Oxfordshire Yeoman pub and Bartholomew School, among other places. Freeland’s nearest station is Combe station, about 1.3 miles north. A little further out are Morris Motors Museum (1.5 miles north-east). For a walk, there’s Blenheim Farm.
What affects the cost of external mastic
The quote reflects the job in front of us. We look at:
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
- Access and height
- The product the joint needs
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, call 0345 464 0079 or email us for an honest opinion and a quote.
What to tell us for a quote
When you call or email, it’s useful to know:
- Where the job is, and your postcode
- If someone has resealed it before
- The problem you’ve noticed
- The rough size of the job
If you’re in Freeland and need external mastic, ring 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before work begins.