Kent · England

External & façade joints in East End, Kent

Sealing brickwork movement joints, render, cladding and façade joints in East End, with a 12-month guarantee on every job. Call for a quick quote.

  • Leaking joints around cladding and façade panels
  • Damp patches traced to an open external joint
  • Cracked joints where brick meets render or frames

Need external mastic in East End?

External mastic in East End, done properly

Many failed façade joints only get noticed once there’s a stain or a damp patch inside. We look over the joints, agree the ones to renew and reseal with a flexible, weatherproof product. If you’re dealing with failed sealant between panels on a façade and plants rooting in failed movement joints, we can help.

Outside joints can only be sealed when they’re dry, so work in East End is booked around the forecast. Let us know about access to every wall, plus any garages or outbuildings.

You get a 12-month guarantee, the same in East End as everywhere else we work.

Location
East End (TN17)
Wider area
Kent
Guarantee
One year on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

East End buildings and the weather

With historic houses such as Smallhythe Place (about 5 miles south-east) nearby, there’s older building stock in the area around East End as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

If you live in an older home near St Margaret's Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep.

East End is about 11 miles west of Ashford, in Kent. We carry out external mastic for homes and businesses in East End. Our Kent coverage runs to 922 places, East End among them. You can also see our page for Crawley, roughly 35 miles from East End.

We cover every part of TN17 for external mastic and the streets around it. Whether your property is on Wood Lane, Mockbeggar Lane and Jackson Way or anywhere close by, our applicators can take on the job. We also cover Fosten Green (1 mile north), Clapper Hill (1 mile north-east), Parkgate (1 mile east), West Cross (2 miles south) and Strood (2 miles south-east). We also work in nearby towns such as Maidstone (13 miles north), Ashford (11 miles east), Foley Park (14 miles north), Paddock Wood (12 miles north-west), Tenterden (3 miles east) and Bearsted (13 miles north).

Around East End

Other landmarks nearby include Sissinghurst Castle (2.5 miles north-west) and Benenden Hospital (within half a mile south).

Map of East End © OpenStreetMap contributors

Why it’s worth doing now in East End

Done well, a resealed joint is a neat, straight line that suits the wall. A hurried job with smeared edges and no backing looks worse and fails sooner. Older cottages and farmhouses around East End can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.

What you get with us

  • Fully insured
  • White, clear, grey or another colour, product permitting
  • Trusted Arbo and Everbuild sealants
  • A sealant colour to suit the surroundings

See how sealant jobs are priced or customer reviews.

How we quote for external mastic

For a quick quote, just ask. The main things that affect it are:

  • The size of the job
  • How easy the joints are to reach
  • Whether there’s mould to deal with
  • The number of rooms or windows

Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, ring 0345 464 0079 or email us for an honest opinion and a quote.

What to tell us for a quote

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • The type of property
  • Photos by email, if that’s easy
  • Any access issues, like height or stairs
  • Any previous sealing or DIY work

To get a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.

Landlords, agents and businesses in East End

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.

Do you need external mastic in East End?

Weeds, moss and debris in a joint are a sign the sealant has gone. Dirt and roots then trap moisture in the joint and speed up the damage.

The most common problems we see are:

  • Moss and dirt in joints with no sealant left
  • Old sealant gone brittle and cracked
  • Joints where the bead has come unstuck
  • Rain getting behind render or cladding at a joint

In and around East End, as anywhere, good external mastic starts with a clean, dry, properly prepared joint.

Comparing quotes

  • What happens if they find a problem under the old sealant
  • Who does the work, and how experienced they are
  • Are they insured?
  • When the joint can take water or movement

Our hiring checklist

Your questions about external mastic in East End

Do you cover East End for external mastic?

Yes. We work across London and the South East, and East End is part of that. You can call 0345 464 0079 or email us and tell us what needs doing, and we’ll send you a clear quote.

Will you come out to East End?

Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.

Why do you put foam in the joint first?

We fit closed-cell backing rod wherever the joint depth needs controlling. It controls the depth and stops the sealant bonding to the back.

Will there be a smell?

Possibly a little. Any smell clears as the sealant cures, and ventilation helps.

Can I do it myself?

You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.

How often do external joints need resealing?

There’s no fixed answer: sunny, exposed elevations and busy joints wear faster. Check them each year and reseal when they split or harden. Our work comes with a 12-month guarantee.

Can you seal joints between render and window frames?

Yes. We cut out the old sealant, prepare both faces and reseal with a flexible exterior product. The colour is chosen to suit.

What do you need from me for a quote?

Let us know what needs doing and where, plus photos if you have them. We’ll ask anything else we need to know.

DIY sealant or a professional job?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Different surfaces, different methods

Concrete and blockwork

Concrete faces can be dusty and porous, so cleaning and priming matter. A primer goes on where the product requires one before sealing.

Render joints

Water behind render can lead to blown patches. Resealing the joints early keeps water out.

How it works

Before we leave, we go over the finished joints with you and explain the cure time. The visit itself normally takes a few hours for a handful of joints, longer for a whole elevation, depending on the amount of work. Somewhere like East End needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Each joint is checked and the colour of the new sealant agreed.
  2. Failed sealant is removed back to clean, sound faces.
  3. Backing rod goes in so the sealant can stretch between the two faces.
  4. We prime the faces where required.
  5. A low-modulus exterior sealant is gunned in and tooled to a neat finish.

Before we arrive

  • Keep children and pets away from the work area
  • For business premises, tell us about site rules or sign-in
  • Tell us about any water getting in

Ask for a quote

Want a quote for external mastic? Please call 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and give you a clear price before we start.

Ask for a quote

Read more

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job