Essex · England
External Mastic in Bures
We cover Bures for sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly.
- Cracked joints where brick meets render or frames
- Rigid filler in a joint that should flex
- Rain getting behind render or cladding at a joint
External mastic in Bures, done properly
On houses, flats and commercial buildings across Bures, we reseal joints in brickwork, render, cladding and façade panels. Every joint gets the same careful preparation: clean, sound faces and a controlled depth. We work on brickwork movement joints, copings & trims and façade panels, and common reasons people get in touch are joints with sealant missing in places and panel joints letting water in.
External sealant needs dry, clean surfaces, so work around Bures is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
Each job carries a 12-month guarantee.
- Location
- Bures (CO8)
- Region
- Essex
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the quote in Bures
Your quote is based on your job. We take into account:
- The number of rooms or windows
- The old material and how stubborn it is
- Working hours on commercial sites
- Whether the work is at height
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
- What’s wrong with the joints now
- A few photos by email, if you can
We quote each job on its own, so the first step is telling us about yours. Simply phone 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
Your questions about external mastic in Bures
Will you come out to Bures?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Bures station. Can you help?
Yes, we work for letting agents and landlords. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear price.
Are you fully insured?
Yes. We are fully insured for domestic and commercial work.
How often do external joints need resealing?
That depends on the wall, the weather and the movement. Look for splits, hardening or edges coming away and have them redone then.
How long will you be here?
A typical job takes anything from a few hours to several days, depending on the building. Your quote will say how long we expect yours to take.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can you reach joints on upper floors?
It depends on the building. Send us photos and a rough idea of the height.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Point out the joints to other trades
- Avoid pressure-washing directly into sealant joints
- Keep soil, plants and ivy away from the joints
- Keep movement joints as flexible joints, not mortar
Give the sealant the cure time we tell you before anything rubs against it. The surface skins over quickly, but full cure takes longer.
Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we’ll get on with it. The work itself takes a few hours for a handful of joints, longer for a whole elevation, including the tidy-up. For a village or hamlet like Bures, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by walking round the building and agreeing the joints and the access.
- Every bit of old sealant and any mortar or debris is cut out.
- Joint faces are cleaned back and primed if the sealant needs it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
Preparing for the visit
- Let us know about parking restrictions
- Mention any leaks or damp you’ve noticed
- On commercial sites, let us know about site rules
Getting a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Read more
Walls and rooflines in Bures
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. Historic houses like Gainsborough's House (about 5 miles north-west) are a reminder that the area around Bures has older buildings as well as new. Where a home is older, older walls and rooflines need a sealant that moves with them and suits the material.
For site and facilities teams at buildings such as Bures Church of England Voluntary Controlled Primary School, larger buildings have long runs of movement joint that eventually need resealing. In the older streets around Church of St Mary the Virgin, older walls, gutters and the joints where extensions meet them need a flexible sealant. For landlords with property near Bures station, split movement joints are easy to miss on a rental until damp shows inside.
Bures is in Essex. Wherever you are in the CO8 postcode area, we cover external mastic for homes and businesses. Our area takes in 644 places across Essex. There’s also a page for Chelmsford, roughly 20 miles from Bures.
Jobs for external mastic in CO8 works the same way as everywhere else we cover. Local streets include Church Square, High Street and Bridge Street. Other places close to Bures include Bures Green (1 mile north-east), Mount Bures (1 mile south), Lamarsh (1 mile north-west), Alphamstone (2 miles north-west) and Cross End (3 miles west). Within a short drive, we also cover Colchester (8 miles south-east), Braintree (11 miles south-west), Witham (13 miles south-west), Camulodunum (7 miles south-east), Halstead (6 miles west) and Greenstead (9 miles south-east).
What’s near Bures
Typical jobs here are in homes near Tiger Hill and Three Horseshoes Inn and the streets around them. Bures has its own railway station: Bures station. Other landmarks nearby include Mount Bures (0.9 miles south). Not far away are Sergeants Orchard.
Honest limits
We’d rather tell you now than do work that won’t last, so these are the limits:
- Cutting new joints into brickwork, which is building work rather than sealant work
- Loose or hollow render, which needs re-rendering
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Concrete & block
- Façade panels
- Render & cladding joints
- Copings & trims
- Brickwork movement joints
- Joints between brick and frames
Surface by surface
Copings and trims
Coping and trim joints face rain and sun head on. We reseal them with an exterior sealant suited to the material.
Render joints
Render is weaker at the surface than brick, so a low-modulus sealant is kinder to the joint edges. We prime where the product needs it.