Surrey · England
External & façade joints in Beare Green, Surrey
Problem with your movement joints in Beare Green? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Weeds or debris growing in open joints
- Water getting into walls through failed joints
- Panel joints letting water in
For landlords and businesses
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we’re fully insured.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
External mastic for homes and businesses in Beare Green
For buildings in Beare Green, we reseal external joints of all kinds, from brick movement joints to cladding panels. The preparation is the same whatever the wall: clean joint faces and the right depth. We work on copings & trims, brickwork movement joints and joints between brick and frames, and people most often call us about water getting into walls through failed joints and plants rooting in failed movement joints.
Older homes in small places like Beare Green may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Beare Green (RH5)
- Wider area
- Surrey
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the quote in Beare Green
You will get a clear quote before work begins. It takes into account:
- Mould in or behind the old joints
- How many areas need sealing
- The size of the job
- The product the joint needs
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What to tell us for a quote
You do not need to know the technical terms. Just tell us:
- Photos by email, if that’s easy
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
- Where the property is
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. We’ll explain what we’d do and give you a clear quote before work begins.
Outside joints around Beare Green
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you look after a building such as The Weald CofE Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Rented homes near Holmwood station change hands often, and failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Beare Green is about 4 miles south of Dorking, in Surrey. Anywhere in RH5, we can carry out external mastic at your property. Beare Green is one of 395 towns and villages in Surrey where we work. There’s also a page for Crawley, roughly 7 miles from Beare Green.
Every address in RH5 is within our area for external mastic. That includes homes and businesses on Leith Grove, Leith Road and Merebank. We also cover the places around Beare Green: Holmwood Corner (1 mile north), South Holmwood (1 mile north), Coldharbour (2 miles west), Capel (2 miles south) and Ockley (3 miles south-west). Larger places within reach include Guildford (12 miles north-west), Woking (15 miles north-west), Epsom (11 miles north), Horley (7 miles east), Redhill (8 miles north-east) and Ewell (12 miles north).
Around Beare Green
Around Beare Green, our work takes us to homes and buildings near Newdigate Brickworks and the streets around them. Beare Green has its own railway station: Holmwood station. Well-known places in the area include Abinger Castle (4.1 miles north-west). For a walk, there’s Vann Lake and Leith Hill.
Why act early in Beare Green
A low-modulus sealant is chosen because it moves without pulling hard at the edges. That matters on brick, render and concrete, which can be weaker at the face. Too stiff a sealant can pull at the edges and break them. Where a wall is exposed, as many are in small places like Beare Green, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
The cost depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
What you get with us
- A choice of colours where the product allows
- Tidy, careful work
- Trusted Arbo and Everbuild sealants
- More than 20 years in sealant work
Read what affects the cost or our reviews.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Do you need external mastic in Beare Green?
Poor preparation causes many early failures: dusty or wet faces, no primer where one was needed, or old sealant left in. The new sealant then lets go long before it should.
The most common problems we see are:
- Joints where the bead has come unstuck
- Panel joints letting water in
- Brick movement joints where the sealant has split
- Movement joints filled with mortar instead of sealant
In the older streets around Church of St Mary Magdalene, the joints between older walls, newer extensions and the roofline need a sealant that can move.
What to look for in a quote
- What preparation is included
- Is VAT in the price?
- How long the guarantee is
- What happens if the job turns out different
FAQs for Beare Green
Can you do external mastic in Beare Green?
Yes, Beare Green is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear price.
Can you help a landlord with a rental near Holmwood station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Is there any odour?
There can be a smell while the sealant cures. Ventilation helps.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply ring 0345 464 0079 or send us an email.
Can you seal joints between two different materials?
Yes. The old joint is removed, both surfaces cleaned and primed where needed, and a flexible sealant applied. We pick a colour that works with both materials.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Do you use backing rod?
Closed-cell backing rod sets the depth of the sealant and stops it sticking to the back of the joint. Then the sealant bonds to two faces and can move.
Can you do several jobs on one visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
How the job changes by surface
Concrete and blockwork
Wide joints in concrete need the depth controlling carefully. Backing rod sized to the joint sets it and keep the sealant to the right depth.
Copings and trims
Coping and trim joints face rain and sun head on. We reseal them with an exterior sealant suited to the material.
Places near Beare Green
What else we do in Beare Green
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for a handful of joints, longer for a whole elevation and we leave things clean and tidy. For a village or hamlet like Beare Green, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint and agree a colour to suit the wall.
- Failed sealant is removed back to clean, sound faces.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- Primer is applied wherever the sealant needs it.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
Before we arrive
- Let us know about earlier repairs to the joints
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.