Essex · England
Aythorpe Roding External Mastic
Our applicators work in Aythorpe Roding on sealing brickwork movement joints, render, cladding and façade joints. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Hard, crazed mastic that has stopped moving
- Weeds or debris growing in open joints
- Cracked joints where brick meets render or frames
External mastic for homes and businesses in Aythorpe Roding
Short cuts in external joints show up within a season or two. New sealant over old, joints packed with mortar and beads with no backing all tend to fail early. We strip the joint back and start again. If you have sealant pulling away from one side of the joint and moss and dirt in joints with no sealant left, we can put it right.
Older homes in small places like Aythorpe Roding may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water normally gets in, and they need the right sealant at the right depth.
There’s a 12-month guarantee on every job.
- Place
- Aythorpe Roding (CM6)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Outside joints around Aythorpe Roding
London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Barrington Hall (about 2.7 miles north-west) nearby, there’s older building stock in the area around Aythorpe Roding as well as newer homes. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material.
If you live in an older home near Parish Church of St Mary, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Aythorpe Roding is about 5 miles south-west of Great Dunmow, in Essex. For external mastic in and around Aythorpe Roding, please phone 0345 464 0079 or drop us an email for a quick quote. We cover Essex from our Crawley base. 644 places in Essex are on our list, large and small. For nearby work, see our Chelmsford page.
Postcode districts we cover here for external mastic: CM6. That includes homes and businesses on Drury Lane and Dunmow Road. Nearby, we also carry out external mastic in Hatfield Broad Oak (2 miles north-west), Hellman's Cross (2 miles north), Puttock's End (3 miles north), Hope End Green (3 miles north) and Ardley End (4 miles west). Within a short drive, we also cover Chelmsford (10 miles south-east), Braintree (12 miles north-east), Harlow (8 miles west), Brentwood (13 miles south), Billericay (14 miles south-east) and Witham (14 miles east).
Local landmarks in Aythorpe Roding
Around Aythorpe Roding, our work takes us to homes and buildings near Axe And Compasses Public House, among other places. Nearby you’ll also find Willingale Doe (4.4 miles south). For a walk, there’s Portingbury Hills.
Places near Aythorpe Roding
More services for Aythorpe Roding
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Aftercare tips
So the new joints stay in good condition:
- Clear growth from the base of walls and joints
- Deal with leaking gutters that soak the joints below
- Look over the joints every year, ideally after winter
- Point out the joints to other trades
Give the sealant the cure time we tell you before anything rubs against it. Most exterior sealants skin fast but take longer to cure right through.
Water getting behind cladding or render can go unnoticed for a long time. When it finally shows inside, the joint may have been open for years.
What we’re called out for in Aythorpe Roding
Sometimes a movement joint was filled with mortar or a rigid filler by mistake. The joint cannot move, so the wall cracks somewhere else instead.
If you can see any of these, it’s time to have the joints looked at:
- Joints with sealant missing in places
- Moss and dirt in joints with no sealant left
- Panel joints letting water in
- Gaps where render, brick and frames meet
For site and facilities teams at buildings such as Rodings Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Comparing quotes
- The length of the guarantee
- How much experience the applicator has
- What the quote includes, VAT included or not
- When the joint can take water or movement
What affects the cost of external mastic
You’ll get a clear quote before any work starts. It’s based on:
- Whether the work is at height
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
- How much there is to do
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Helping us quote
To help us quote quickly, please include:
- Any access issues, like height or stairs
- Whether it’s a home or a business
- Where the job is, and your postcode
- Any previous sealing or DIY work
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
How it works
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes anything from a few hours to several days, depending on the building, depending on the size of the job. For a village or hamlet like Aythorpe Roding, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First, the joints are inspected and the access agreed.
- We cut out the old mastic and rake out anything in the joint.
- Joint faces are cleaned back and primed if the sealant needs it.
- We fit closed-cell backing rod to control the depth.
- The exterior sealant is applied, tooled and checked along its length.
How to prepare
- Clear the area around the work
- Mention any parking rules near the property
- Mention any sign-in or site rules at work premises
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.
Advice
Your questions about external mastic in Aythorpe Roding
Do you cover Aythorpe Roding for external mastic?
Yes, Aythorpe Roding is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
What guarantee comes with external mastic in Aythorpe Roding?
All our work, in Aythorpe Roding and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Do you seal joints where cladding meets other materials?
Yes. Different materials move at different rates, so a flexible sealant is needed where they meet. We choose one that suits both surfaces.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Will the old sealant be removed?
Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.
Can tenants book the work?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you use backing rod?
Closed-cell backing rod sets the depth of the sealant and stops it sticking to the back of the joint. That way it bonds to the two sides only and can stretch.
Landlord and commercial work in Aythorpe Roding
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
How the job changes by surface
Concrete and blockwork
Concrete and block walls shrink as they dry and move with temperature. Their movement joints are sealed over backing rod with a flexible sealant.
Brickwork movement joints
Brick moves with heat and moisture, and grows a little over time. That movement goes into the joint, so the sealant in it must stay soft and stretchy.