South Lanarkshire · Scotland
External & façade joints in Auchenheath, South Lanarkshire
Sealing brickwork movement joints, render, cladding and façade joints for householders, landlords and businesses in Auchenheath. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Weathered mastic that no longer stretches
- Cracked joints where brick meets render or frames
- Movement joints with cracked, split or missing sealant
When to call us in Auchenheath
Weeds, moss and debris in a joint are a sign the sealant has gone. Roots and dirt hold water against the wall and speed up the damage.
It’s worth asking for a quote if you see:
- Brick movement joints where the sealant has split
- Panel joints letting water in
- Cracked joints where brick meets render or frames
- Sealant pulling away from one side of the joint
Letting a property close to Carluke station? Then outside joints that have cracked can let damp into a rental, so check them between lets.
Comparing quotes
- Whether you can choose the colour
- What the quote includes, VAT included or not
- What guarantee comes with the work
- Is the old sealant removed completely?
External mastic in Auchenheath, done properly
Short cuts in external joints show up within a season or two. New sealant over old, joints packed with mortar and beads with no backing all tend to fail early. We take the old material out and do it properly. If you’re dealing with damp patches traced to an open external joint and cracked joints where brick meets render or frames, we can help.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. Newer houses need their movement joints and roofline trims kept sound.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Auchenheath (ML11)
- Wider area
- South Lanarkshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What we cannot put right
A few problems are outside what sealant work can do:
- Cracks in the bricks or render themselves, away from the joints
- Subsidence or other structural problems
- Loose or hollow render, which needs re-rendering
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we’ll tell you honestly before you book.
Where we work in Auchenheath
- Joints between brick and frames
- Façade panels
- Concrete & block
- Copings & trims
- Brickwork movement joints
- Render & cladding joints
What the job involves on each surface
Concrete and blockwork
Wide joints in concrete need the depth controlling carefully. We size the backing rod to the gap and keep the sealant to the right depth.
Joints between dissimilar materials
Wherever two materials meet, they move differently. We seal the joint with a flexible exterior sealant so neither cracks the other.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Places near Auchenheath
More services for Auchenheath
Auchenheath buildings and the weather
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
In the older streets around Kirkmuirhill Parish Church, an extension built onto an older house moves differently, and the joint between them takes the strain. If you look after a building such as Lesmahagow High School, larger buildings have long runs of movement joint that eventually need resealing.
Auchenheath is about 5 miles south-west of Carluke, in South Lanarkshire. Jobs in Auchenheath get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 139 towns and villages across South Lanarkshire, large and small. For nearby work, see our Glasgow page.
Work in ML11 works the same way as everywhere else we cover. You will find streets such as Lancaster Road, Windyridge and Mossgiel, all of which we cover. Other places close to Auchenheath include Tillietudlem (1 mile north), Dillarburn (2 miles south-east), Hazelbank (2 miles north-east), Lesmahagow (2 miles south) and Brocketsbrae (3 miles south). Larger places within reach include East Kilbride (13 miles north-west), Hamilton (9 miles north-west), Cambuslang (14 miles north-west), Uddingston (13 miles north-west), Blantyre (11 miles north-west) and Larkhall (5 miles north-west).
Around Auchenheath
For rail, the closest station is Carluke station, about 4.4 miles north-east of the centre. A little further out are Craignethan Castle (1.7 miles north) and Birkwood Castle (2.8 miles south). The countryside around Auchenheath includes Black Hill.
What we do, step by step
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours to a few days, depending on the length of joint and the access. Somewhere like Auchenheath may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We start by walking round the building and agreeing the joints and the access.
- We cut out the old mastic and rake out anything in the joint.
- Joint faces are cleaned back and primed if the sealant needs it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- For indoor joints, keep the area dry beforehand if you can
- Tell us if parking is tricky
Get a quote
Want a quote for external mastic? Please send an email to info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
Read more
Leave it or put it right?
A low-modulus sealant is chosen because it moves without pulling hard at the edges. That protects surfaces like brick, render and concrete. A stiffer product can damage the joint edge as it fails. In an older home around Auchenheath, damp from a failed joint can get into timber and plaster.
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What you get with us
- 12-month guarantee on every job
- Over 20 years’ experience
- Old sealant always removed completely
- An ARBOMaster approved applicator
Take a look at how sealant jobs are priced or our reviews.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Avoid pressure-washing directly into sealant joints
- Act on the first splits you see
- Walk round the building once a year and look at the joints
- Keep soil, plants and ivy away from the joints
Keep pressure washers away from the sealant. A strong jet can damage the edges of the bead over time.
Once a joint can’t move, the wall finds another way, normally as cracking in the brickwork or render nearby. Resealing it early helps prevent that.
Questions from Auchenheath
Do you work for landlords with property near Carluke station?
Yes, landlords and agents are among the people we work for. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear price.
Will you come out to Auchenheath?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you work at height?
It depends on the building. Where joints can be reached safely, we’ll do them. Give us some details and we will confirm the access.
Can you match the colour of my brickwork?
There’s a good range of exterior colours, including greys, browns, whites and stone tones. We choose the closest to your brick or render so the joint doesn’t draw the eye.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
Is the work guaranteed?
Yes, always. There’s a 12-month guarantee on every job.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.