Hampshire · England
Commercial & hotel sealant in Borden, Hampshire
Professional commercial sealant in and around Borden, with old sealant always removed completely and a one-year guarantee.
- Large numbers of bathrooms needing the same work
- Mouldy washroom sealant that staff and guests notice
- Split sealant around staff kitchen worktops and sinks
What the job involves on each surface
Retail & leisure sites
Customer toilets reflect on the business, and clean, neat sealant makes them look cared for.
Welfare facilities
Welfare facilities, shower rooms and changing areas need to stay usable. Work can be split into sections.
Commercial sealant in Borden, done properly
Mouldy or split sealant in a commercial building causes more than a bad impression. Cleaners struggle with it, water gets through it and people notice it. Our applicators renew sealant across washrooms, welfare areas, kitchens and guest bathrooms. Typical jobs include split sealant around staff kitchen worktops and sinks and shower leaks reaching the floor below, across retail & leisure sites, hotel bathrooms and office washrooms & kitchens.
For a small place like Borden, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
Each job carries a 12-month guarantee.
- Place
- Borden (GU30)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Commercial buildings in Borden
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Liss station change hands often, and we can quote for one property or a whole portfolio of rentals.
Borden is about 5 miles east of Petersfield, in Hampshire. Borden gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. We cover 683 towns and villages across Hampshire. Portsmouth is on our list too, about 18 miles from Borden.
Postcode districts we cover here for commercial sealant: GU30. Other places close to Borden include Trotton Marsh (1 mile east), Rogate (1 mile south-west), Chithurst (1 mile south-east), Milland (2 miles north-east) and Rake (2 miles north-west). We also work in nearby towns such as Havant (13 miles south-west), Horndean (11 miles south-west), Alton (11 miles north-west), Waterlooville (13 miles south-west), Petersfield (5 miles west) and Purbrook (14 miles south-west).
Local landmarks in Borden
For rail, the closest station is Liss station, about 3.6 miles north-west of the centre. A little further out are Midhurst Community Hospital (4.1 miles south-east). Green spaces nearby include Wheeler's Down and Iping and Stedham Commons.
When something else is needed
In fairness, some problems need a different trade:
- Certifying fire stopping or building compliance
- Water coming from plumbing rather than sealant
- Extraction that is not working, which needs an electrician or ventilation contractor
If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before booking.
What we seal
- Hotel bathrooms
- Retail & leisure sites
- Rental portfolios
- Student & care accommodation
- Welfare facilities
- Office washrooms & kitchens
Questions from Borden
Is Borden within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Liss station. Can you help?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Can I add another job to the visit?
Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Can you match the sealant colour?
In most cases you can choose. We’ll explain which colours are available and agree one before any work starts.
Where is Mr Mastic based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What do you need from me for a quote?
Let us know what needs doing and where, plus photos if you have them. If we need more, we’ll ask.
When to call us in Borden
In an accessible wet room, water spreads across the floor every use, so the joints at floor level are under water often. A failed joint there can soon let water into the floor or walls.
The problems people generally mention when they call include:
- Tired sealant in let properties
- Washrooms that need sorting before an inspection
- Whole floors of tired en suites
- Shower leaks reaching the floor below
If you look after a church, hall or community building such as Church of St Peter, its kitchen and washroom sealant needs looking after like anywhere else.
What your quote should include
- Whether the sealant suits the joint
- Is the old sealant removed completely?
- Who turns up on the day
- Whether VAT is included
Places near Borden
Other services in Borden
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
For anyone letting property in or around Borden, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
How the visit works
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes as long as the scope needs, from one welfare room to a full building. For a village or hamlet like Borden, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We agree a programme with you: which rooms, in what order, at what times.
- We go through your site’s paperwork needs, such as RAMS, before work begins.
- In each room, the old bead comes out and the joint is cleaned and treated.
- Anti-fungal sanitary silicone goes into wet areas, with suitable sealant elsewhere.
- Each finished area is checked with you and given a cure time.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
Ask for a quote
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, ring 0345 464 0079 or email us.
Related advice
How we quote for commercial sealant
There’s no set price list, because no two jobs are the same. The quote depends on:
- The type of sealant required
- Access and height
- Whether old sealant or filler has to be cut out
- The number and length of the joints
Combining jobs into one visit is normally more efficient than separate visits. You will get one clear quote for the whole job.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- Roughly how big the job is
- The type of property
- How we’d reach the joints
- Photos by email, if that is easy
For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.