West Sussex · England
Bathroom & kitchen resealing in Tower Hill, West Sussex
Bath, shower, basin, wet room, worktop and sink resealing in Tower Hill, with a one-year guarantee on every job. Ask us for a quote.
- Water getting behind the bath panel
- Sealant that has split, shrunk or peeled away
- Mouldy sealant that has gone black
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
How we handle bathroom resealing in Tower Hill
Kitchens need the same care as bathrooms. Worktop upstands, sink edges and splashback joints get wet every single day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Common call-outs are for gaps where the bath or tray has moved and smears of silicone across the tiles, on sinks & splashbacks, basins & vanity units and kitchen worktops & upstands.
Homes around Tower Hill are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Whatever the size of the job, it’s backed by our 12-month guarantee in Tower Hill and across West Sussex.
- Location
- Tower Hill (RH13)
- Wider area
- West Sussex
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How the job changes by surface
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both get soaked every time the shower runs, so each is cut out and renewed with anti-fungal sanitary silicone.
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows.
Do you need bathroom resealing in Tower Hill?
Baths and trays move. Acrylic in particular gives slightly under the weight of water and a person, while a poorly supported tray can shift underfoot. Over time the joint tears or pulls away from the tile.
The problems people generally mention when they call are:
- A joint torn by a bath that flexes
- A bead that has pulled away from the tiles
- A reseal done over the top of the old bead
- Black spots spreading through the bead
If you live in an older home near Parish Church of St Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Questions to ask before booking
- Which colour the sealant will be
- Whether VAT is included
- Who does the work, and how experienced they are
- What preparation is included
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Check the joints every few months for splits or lifting
- Dry the bead with a towel now and then
- Move toiletries away from the joint
- Dry worktop joints after washing up
Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
Bathrooms and kitchens in Tower Hill
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings. There are hotels and other places to stay in and around Tower Hill. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you let a flat or house near Christs Hospital station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. For site and facilities teams at buildings such as St John's Catholic Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Tower Hill is about 1 mile south-west of Horsham, in West Sussex. Homes, rented property, offices and hotels in Tower Hill can book us for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Tower Hill is one of 371 towns and villages in West Sussex where we work for bathroom resealing. We also work in Crawley, about 8 miles from Tower Hill.
Here we cover the RH13 postcode area for bathroom resealing. Streets in the area include Tower Hill, Tower Close and Salisbury Road, all of which we cover. Neighbouring places we cover for bathroom resealing include Broadbridge Heath (1 mile north-west), Horsham (1 mile north-east), Southwater (2 miles south), Itchingfield (2 miles west) and Warnham (2 miles north). We also work in nearby towns such as Crawley (8 miles north-east), Haywards Heath (11 miles east), Burgess Hill (11 miles south-east), East Grinstead (15 miles east), Shoreham-by-Sea (15 miles south) and Broadfield (7 miles north-east).
Local landmarks in Tower Hill
Locally, jobs take us to homes and businesses close to Tanbridge House School, Warnham Park and The Doyle School of Design and Technology. The nearest railway station is Christs Hospital station, roughly 0.9 miles west. A little further out are Horsham Hospital (1.3 miles north-east) and Christs Hospital School Museum (1.1 miles south-west). Not far away are Warnham LNR.
Also near Tower Hill
What else we do in Tower Hill
Leave it or put it right?
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it generally comes back. The lasting answer is to remove the bead and start again. Where a wall is exposed, as many are in small places like Tower Hill, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- Approved under the ARBOMaster scheme
- White, clear, grey or another colour, product permitting
- Fully insured
- We leave the area clean and tidy
Your questions about bathroom resealing in Tower Hill
Do you take on hotel work around Tower Hill?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Is Tower Hill within the area you cover?
Yes. Tower Hill is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you remove the old sealant?
Yes, every time. New sealant will not bond properly to old, so the joint is cleaned back first.
Will it make a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Is white the only colour available?
You’re not limited to white: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.
Can mouldy silicone be sorted out?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that generally means someone at home.
How long does it take to reseal a bath or shower?
One bath or shower is around two hours’ work, old sealant removal included. A whole bathroom plus the kitchen may take most of the day.
How the visit works
Once we’re on site, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take around two hours for one bath or shower, longer for a whole bathroom. Somewhere like Tower Hill needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
Before we arrive
- Mention any sign-in or site rules at work premises
- Let us know about parking restrictions
- Move anything stored near the joints
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Read more
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.