Surrey · England

Sutton Abinger Bathroom Resealing

Bathroom resealing across Sutton Abinger and nearby, with old sealant always removed completely and a one-year guarantee.

  • Sealant that has split, shrunk or peeled away
  • Water escaping at the shower enclosure
  • New sealant laid over old sealant that is now lifting

Trusted bathroom resealing in Sutton Abinger

About our bathroom resealing in Sutton Abinger

The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, after which the joint is degreased and any mould treated. New silicone goes on only when the joint is fully dry. Typical jobs include lumpy, uneven sealant from a DIY attempt and shrunken sealant along the back of a worktop, across baths, shower trays & enclosures and basins & vanity units.

Being in a small place like Sutton Abinger makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.

Silicone being applied where a shower enclosure meets beige wall tiles
Place
Sutton Abinger (RH5)
Region
Surrey
Guarantee
12 months on all our work
Quote
A clear price before we start
Call
0345 464 0079
Last updated
26 October 2026

Common problems we fix in Sutton Abinger

Plenty of failed sealant has been laid over the top of older sealant. New silicone won’t bond to old silicone, so it peels, leaks and hides mould behind it.

Common reasons people contact us are:

  • A reseal done over the top of the old bead
  • Water getting behind the kitchen upstand
  • Leaking joints on a shower screen
  • Damp behind the bath or under the tray

If you let a flat or house near Gomshall station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.

Comparing quotes

  • Whether they seal over old material or remove it
  • How much experience the applicator has
  • How the surfaces are prepared before sealing
  • What insurance they hold

10 questions to ask before you book

The process

We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. Expect the work to take a morning or an afternoon for most single baths and showers, and we tell you how long to leave it before we go. Somewhere as small as Sutton Abinger, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First, each joint is checked for movement and signs of water.
  2. The old silicone is cut out completely, along with the film it leaves on the tiles.
  3. Joints are degreased and any mould is treated.
  4. With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
  5. We tool the bead to a neat finish and give you the cure time, usually around 24 hours.

Getting ready for the visit

  • Let us know about earlier repairs to the joints
  • Mention any sign-in or site rules at work premises
  • Clear the area around the work

Get a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work.

Ask for a quote

Related advice

Common questions in Sutton Abinger

Can you do bathroom resealing in Sutton Abinger?

Yes, Sutton Abinger is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or send us an email and let us know what needs doing, and we will give you a clear quote.

Can you help a landlord with a rental near Gomshall station?

Yes. We work for landlords and letting agents as well as householders. You can ring 0345 464 0079 or send us an email with the details for a clear quote.

My sealant has gone black. Can you sort it?

Yes, by replacing the sealant. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.

How long before the new sealant can get wet?

After around 24 hours in most cases. You will get the exact cure time before we leave.

What sealant do you use?

Each joint gets the product that suits it. Movement, water and weather all affect the choice.

Can I do it myself?

It depends on the job. High-level, external movement and fire-rated joints are professional jobs.

Can you just seal over the old silicone?

No, and it’s one of the main reasons reseals fail. We cut out all of the old sealant, clean the joint and start again.

Do you do kitchens as well as bathrooms?

Yes. Kitchen joints get extra degreasing before the new bead goes on, then a colour-matched bead is laid.

What the job involves on each surface

Basins & vanity units

Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.

Sinks & splashbacks

Water getting under the rim of an inset sink can soak the worktop. We reseal the visible edge of the sink where it has failed.

Bathrooms and kitchens in Sutton Abinger

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

For an older house near a landmark such as Church of St James, older homes can move a little, which is hard on rigid grout and tired sealant. Managing a site like Belmont Prep School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Sutton Abinger is about 5 miles south-west of Dorking, in Surrey. Jobs in Sutton Abinger get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Surrey, we cover 395 places, Sutton Abinger among them. Crawley is on our list too, about 12 miles from Sutton Abinger.

Our applicators cover all of RH5 for bathroom resealing. You will find streets such as Hoe Lane, Annisdowne Close and Sutton Place, and we cover them all. Neighbouring places we cover for bathroom resealing include Hoe (1 mile west), Abinger (1 mile east), Abinger Hammer (1 mile north), Gomshall (1 mile north-west) and Shere (2 miles north-west). Within a short drive, we also cover Guildford (7 miles north-west), Woking (10 miles north-west), Epsom (12 miles north-east), Horley (11 miles east), Redhill (12 miles east) and Ewell (13 miles north-east).

Around Sutton Abinger

In Sutton Abinger, that means homes and buildings near The Volunteer pub and Hurtwood House and the streets around them. Sutton Abinger’s nearest station is Gomshall station, about 1.4 miles north-west. Nearby you will also find Mesolithic Museum (0.9 miles east) and Abinger Castle (0.9 miles east). Not far away are Combe Bottom and Silent Pool.

Map of Sutton Abinger © OpenStreetMap contributors

Why it’s worth doing now in Sutton Abinger

Tired sealant is not a reason to replace a bath or shower. A new bead often brings the whole room back. If something else is wrong, we will tell you. Older cottages and farmhouses around Sutton Abinger can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll go through it with you.

Why choose Mr Mastic in Sutton Abinger

  • Over 20 years’ experience
  • ARBOMaster approved applicator
  • A 12-month guarantee on all work
  • We never seal over old sealant

Read how sealant jobs are priced and customer reviews.

For landlords and businesses

Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we will quote.

Aftercare tips

After the cure time, these simple habits help:

  • Stick to a soft cloth and a mild cleaner
  • Run the extractor fan during and after every shower
  • Move toiletries away from the joint
  • Wipe the sealant dry after showering

In a kitchen, don’t let water sit along the back of the worktop and keep hot pans away from the silicone. The drier the joint stays, the longer it lasts.

A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, and the board underneath can swell. A reseal in time can save the worktop.

How we quote for bathroom resealing

You’ll get a clear quote before we start. It takes into account:

  • The number and length of the joints
  • Any mould that needs treating
  • How easy the joints are to reach
  • When we can work, for business premises

What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and give you a clear price before we start.

Helping us quote

To make quoting easier, please include:

  • The address or postcode of the job
  • What the problem is, such as mould, gaps, leaks or cracking
  • Any previous sealing or DIY work
  • The rough size of the job

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job