Hampshire · England
Bathroom & kitchen resealing in Salters Heath, Hampshire
Bathroom resealing across Salters Heath and nearby, with old sealant always removed completely.
- Gaps where the bath or tray has moved
- Lumpy, uneven sealant from a DIY attempt
- Failed sealant on the screen profile
What bathroom resealing looks like in Salters Heath
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you look after a building such as The Priory Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near Pamber Priory, walls and floors in older homes can move, and sealant and grout show it first. Letting a property close to Bramley (Hants) station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Salters Heath is about 3 miles south of Tadley, in Hampshire. We provide bathroom resealing to homeowners, landlords and businesses in Salters Heath and nearby, as part of our work across Hampshire. Across Hampshire, we cover 683 places, Salters Heath among them. We also work in Reading, about 11 miles from Salters Heath.
Every address in RG26 is covered for bathroom resealing. You will find streets such as Aldermaston Road and Salters Heath Road, all of which we cover. Neighbouring places we cover for bathroom resealing include Pamber End (1 mile north-west), Monk Sherborne (1 mile south-west), Pamber Green (1 mile north), Little London (1 mile north-east) and Charter Alley (1 mile west). Further out, we also cover Basingstoke (4 miles south), Farnborough (15 miles east), Fleet (12 miles east), Alton (13 miles south-east), Yateley (12 miles east) and Tadley (3 miles north).
What’s near Salters Heath
Around Salters Heath, our work takes us to homes and buildings near The Queens College Arms and Everest Community Academy. Salters Heath’s nearest station is Bramley (Hants) station, about 2.7 miles east. A little further out are Calleva Museum (2.8 miles north) and Basing House (4.4 miles south-east). The countryside around Salters Heath includes Daneshill Park Woods.
Bathroom resealing in Salters Heath
The bead of silicone around a bath, tray or worktop is what keeps water out of the gaps. When it splits, shrinks or turns black, water gets behind it. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We’re often asked to deal with a bead that has pulled away from the tiles and leaks into the floor or ceiling below, on sinks & splashbacks, baths and kitchen worktops & upstands.
In a village or hamlet like Salters Heath, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.
All of our work is guaranteed for twelve months, in Salters Heath and everywhere else we cover.
- Where
- Salters Heath (RG26)
- Wider area
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Check the joints every few months for splits or lifting
- Wait for the cure time we give you
- Dry worktop joints after washing up
- Squeegee the walls and tray after use
Keep bottles and razors off the sealant line, because they trap water against the silicone. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
What affects the cost of bathroom resealing
Call for a quick quote. What matters most is:
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
- Whether there’s mould to deal with
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Asking for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- A few pictures by email, if you can
- Where the job is, and your postcode
- What’s wrong with the joints now
- The rough size of the job
Getting a quote is simple: let us know what needs doing and where and its rough size. Photos by email help us understand the job.
Also near Salters Heath
Other services in Salters Heath
How the job changes by surface
Baths
Baths move more than any other fitting, so we fill it with water before sealing. The joint is then laid with the bath at its lowest point and is not stretched when it’s used.
Wet rooms
Not every wet room leak is a sealant problem. We check the joints and say so if the fault looks to be elsewhere.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes two to three hours for a typical bath, depending on how much old sealant there is from start to finish. Somewhere like Salters Heath needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
How to prepare
- Mention any leaks or damp you’ve noticed
- Mention any tricky access
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
For a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.
Read more
Your questions about bathroom resealing in Salters Heath
Can you do bathroom resealing in Salters Heath?
Yes. We work across London and the South East, and Salters Heath is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Can you help a landlord with a rental near Bramley (Hants) station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Do you reseal kitchen worktops and sinks too?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
How do I get a quote for bathroom resealing in Salters Heath?
It depends on the job, so we quote each one individually. To get one, phone 0345 464 0079 or send us an email with a short description of the job.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Salters Heath and the rest of Hampshire.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
How long does it take to reseal a bath or shower?
Allow a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. We will confirm how long your job needs when we quote.
What happens if it’s left?
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. In a small place like Salters Heath, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why choose Mr Mastic in Salters Heath
- ARBOMaster approved applicator
- Tidy, careful work
- Rated 4.9 stars on Google
- Over 20 years’ experience
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
What we can’t put right
Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:
- Tiles that have come away from the wall
- Movement from a bath with loose feet or no proper support
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks