Kent · England
Bathroom & kitchen resealing in Rolvenden, Kent
Bathroom resealing across Rolvenden and nearby, with every bit of old sealant taken out first and a 12-month guarantee.
- Sealant that has split, shrunk or peeled away
- Water escaping at the shower enclosure
- Leaks into the floor or ceiling below
What affects the cost of bathroom resealing
For a quick quote, just ask. What matters most is:
- How many rooms, windows or areas are involved
- The size of the job
- Whether there’s mould to deal with
- The type of sealant required
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
Helping us quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
- A few photos by email, if you can
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.
About our bathroom resealing in Rolvenden
A reseal only lasts if the joint is properly prepared. Every bit of old silicone comes out, down to the thin film left on the tiles, after which the joint is degreased and any mould treated. Only once it’s dry does the new bead go on. If you have shrunken sealant along the back of a worktop and leaks into the floor or ceiling below, we can help.
Somewhere as small as Rolvenden, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Your job is guaranteed for a year, as with all our work.
- Where
- Rolvenden (TN17)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Nearby places to Rolvenden
Other services in Rolvenden
What we do, step by step
Once we are on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes two to three hours for a typical bath, depending on how much old sealant there is. For a village or hamlet like Rolvenden, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, usually around 24 hours.
Before we arrive
- Keep children and pets away from the work area
- Clear the area around the work
- Tell us about any water getting in
Getting a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, phone 0345 464 0079 or send us an email.
Read more
FAQs for Rolvenden
Is Rolvenden in your area for bathroom resealing?
Yes. We work across London and the South East, and Rolvenden is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job.
Is bathroom resealing in Rolvenden guaranteed?
All our work, in Rolvenden and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Do you take out the old sealant first?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels.
Are you an approved applicator?
Yes. We’re approved under the ARBOMaster scheme.
Where are you based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Can mouldy silicone be sorted out?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Good ventilation helps keep it away.
Can tenants book the work?
Yes. Check with your landlord; we can send the quote to them too.
Surface by surface
Wet rooms
In a wet room, the joints between floor and walls take standing water. They get anti-fungal sanitary silicone, and our work is on the visible joints only.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, and we treat it exactly as we would a bath.
DIY sealant or a professional job?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
What we’re called out for in Rolvenden
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
Look out for these signs:
- Failed sealant on the screen profile
- Cracked, shrunken or lifting silicone
- Smears of silicone across the tiles
- A reseal done over the top of the old bead
If you look after a building such as Rolvenden Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Before you book anyone
- Which colour the sealant will be
- Are they insured?
- Whether VAT is included
- How long to leave it before use
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
If you manage several properties in or around Rolvenden, several properties can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Rolvenden homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Parish Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Rolvenden is about 12 miles south-west of Ashford, in Kent. We provide bathroom resealing to homes and businesses in Rolvenden and the surrounding area, as part of our work across Kent. Rolvenden is one of 922 towns and villages in Kent we cover. Our Crawley page covers work nearby, about 36 miles away.
Our applicators cover all of TN17 for bathroom resealing. Bathroom resealing is available to properties on High Street, Sparkeswood Avenue and Glebe Field. We also cover West Cross (1 mile west), Rolvenden Layne (1 mile south-east), Strood (1 mile north-east), Parkgate (2 miles north) and East End (3 miles north). Further out, we also cover Maidstone (15 miles north), Ashford (12 miles north-east), Paddock Wood (14 miles north-west), Tenterden (3 miles north-east), Bearsted (15 miles north) and Park Wood (13 miles north).
Around Rolvenden
In Rolvenden, that means homes and buildings near The Star Public House and the streets around them. Well-known places in the area include The C.M Booth Collection (less than half a mile west) and Benenden Hospital (2.4 miles north).
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Dry the bead with a towel now and then
- Clean with a mild bathroom cleaner and a soft cloth
- Never pick at the silicone with a blade
- Keep bottles off the sealant line
Good ventilation does more than any cleaner. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.
Worktop joints fail quietly. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. A reseal in time can save the worktop.