Hampshire · England
Bathroom Resealing in Priddy's Hard
Our applicators work in Priddy's Hard on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Gaps where the bath or tray has moved
- Water getting behind the kitchen upstand
- Black spots spreading through the bead
Bathroom resealing for homes and businesses in Priddy's Hard
Kitchens need the same care as bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We work on sinks & splashbacks, wet rooms and shower trays & enclosures, and the jobs we see most are sealant that has split, shrunk or peeled away and water escaping at the shower enclosure.
Being in a small place like Priddy's Hard makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
All of our work is guaranteed for twelve months.
- Where
- Priddy's Hard (PO12)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Common questions in Priddy's Hard
Is Priddy's Hard within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work in hotels near Priddy's Hard?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.
How do I get a quote for bathroom resealing in Priddy's Hard?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You will get a clear quote before any work starts.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
How long before the new sealant can get wet?
We give you the cure time before we leave, and it’s normally around 24 hours. Getting it wet too early can spoil the new joint.
Is the work guaranteed?
Yes. Every job carries our 12-month guarantee.
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Dry the bead with a towel now and then
- Clean with a mild bathroom cleaner and a soft cloth
- Move toiletries away from the joint
- Give the silicone its full cure time
Have a look at the joints every few months. Small splits and lifting ends are easy to catch early, so if something does not look right, just phone 0345 464 0079 or send us an email.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
Towns and villages near Priddy's Hard
Also in Priddy's Hard
What sealant work can’t fix
We’ll always be straight with you, so here’s what sealant cannot fix:
- Damage behind the tiles that needs a tiler
- Water getting in through the grout rather than the sealant
- A cracked shower tray or bath (that needs repair or replacement)
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Where we work in Priddy's Hard
- Sinks & splashbacks
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
When to call us in Priddy's Hard
The wrong product fails fast. Acrylic caulk and general-purpose sealants are not designed for a joint that’s wet every day, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
The problems people usually mention when they call are:
- Gaps where the bath or tray has moved
- New sealant laid over old sealant that is now lifting
- Water getting behind the bath panel
- Smears of silicone across the tiles
If you look after a building such as St Vincent College, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Comparing quotes
- Whether they’re fully insured
- Is VAT in the price?
- Who does the work, and how experienced they are
- Which colour the sealant will be
Why it’s worth doing now in Priddy's Hard
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. In a small place like Priddy's Hard, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Combining jobs into one visit normally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
Why us?
- A 12-month guarantee on all work
- You choose the colour before work begins
- Full insurance on every job
- 4.9 on Google from 180+ five-star reviews
Read how sealant jobs are priced and our reviews.
Bathroom resealing around Priddy's Hard
Priddy's Hard is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Portsmouth Harbour station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. If you live in an older home near Church of St Mary, older homes can move a little, which is hard on rigid grout and tired sealant.
Priddy's Hard is about 1 mile east of Gosport, in Hampshire. From the centre of Priddy's Hard to the outskirts, bathroom resealing is available for homes and businesses alike. Priddy's Hard is one of 683 places in Hampshire where we work.
Work in PO12 is quoted and booked the same way as anywhere else. We cover properties on Weevil Lane, Orion Avenue and Salt Meat Lane and the roads around them. We also cover the places around Priddy's Hard: Forton (1 mile south-west), Elson (1 mile north-west), Gosport (1 mile west), Bridgemary (2 miles north-west) and Rowner (2 miles north-west). Further out, we also cover Havant (7 miles north-east), Eastleigh (15 miles north-west), Fareham (4 miles north-west), Horndean (9 miles north-east), Hedge End (11 miles north-west) and Waterlooville (7 miles north-east).
Local landmarks in Priddy's Hard
We work in homes and buildings around Brune Park Community School, The Windsor Castle pub and Elson Junior School, among other places. For rail, the closest station is Portsmouth Harbour station, about 1 mile south-east. A little further out are Tricorn Centre (1.6 miles east) and Search (0.8 miles south). The countryside around Priddy's Hard includes West of the River Alver and Portsdown Hill.
Should I try it myself first?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
How the visit works
All our tools and materials come with us in the van, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a small place like Priddy's Hard, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Clear items away from the joints we’re working on
- Mention any tricky access
- Tell us about any water getting in
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you’re ready, phone 0345 464 0079 or email us.
Related advice
Surface by surface
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. Proper degreasing is what helps the new joint last.