Surrey · England
North Holmwood Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing in North Holmwood, with a 12-month guarantee on every job. Call for a quick quote.
- Water getting behind the bath panel
- Failed sealant on the screen profile
- Black mould in the silicone that won’t clean off
About our bathroom resealing in North Holmwood
Across North Holmwood, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. We are often asked to deal with water getting behind the bath panel and black mould in the silicone that won’t clean off, on wet rooms, sinks & splashbacks and kitchen worktops & upstands.
Around North Holmwood, you will mostly find houses and bungalows, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
Every job comes with a one-year guarantee.
- Place
- North Holmwood (RH5, RH4)
- Region
- Surrey
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
How the visit works
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it normally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In a smaller place like North Holmwood, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, generally around 24 hours.
Before we arrive
- Try not to wet indoor joints just before the visit
- Let us know about parking restrictions
- Move anything stored near the joints
How to get a quote
To get a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
Read more
How we quote for bathroom resealing
The price is agreed before any work begins. It takes into account:
- Mould in or behind the old joints
- Which sealant suits the joint
- The old material and how stubborn it is
- When we can work, for business premises
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.
Asking for a quote
When you contact us, it’s useful to know:
- Access, such as stairs, a lift or height
- Whether it has been sealed before
- Pictures of the joints, sent by email
- The problem you’ve noticed
We don’t publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or send us an email.
What sealant work cannot fix
In fairness, some problems need a different trade:
- A bath or tray that moves because it isn’t properly supported
- A tray or bath that is cracked through
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
Where we work in North Holmwood
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks
For landlords and businesses
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Housing providers, facilities teams and property managers book us too in North Holmwood and across Surrey. Several sites can go on one quote, and we are fully insured for the work.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Towns and villages near North Holmwood
What else we do in North Holmwood
North Holmwood homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. There are hotels and other places to stay in and around North Holmwood. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you live in an older home near Church of St John the Evangelist, older homes can move a little, which is hard on rigid grout and tired sealant. Managing a site like St John's Church of England Primary School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Dorking West station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
North Holmwood is about 1 mile south of Dorking, in Surrey. Jobs in North Holmwood get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Across Surrey, we cover 395 places, and North Holmwood is one of them. Crawley is on our list too, about 9 miles from North Holmwood.
Here we cover the RH5 and RH4 postcode area for bathroom resealing. If you need bathroom resealing at a property on Howard Road, Horsham Road and Inholms Lane or a nearby road, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Blackbrook (1 mile south-east), Mid Holmwood (1 mile south-west), Dorking (1 mile north), Pixham (2 miles north) and Westcott (2 miles north-west). Further out, we also cover Guildford (11 miles west), Woking (13 miles north-west), Epsom (9 miles north), Horley (7 miles east), Redhill (7 miles east) and Ewell (10 miles north).
Near you in North Holmwood
We work in homes and buildings around Inholms Clay Pit, The Priory CofE Voluntary Aided School and Royal Oak pub, among other places. North Holmwood’s nearest station is Dorking West station, roughly 1.8 miles north-west. Other landmarks nearby include Mesolithic Museum (3.7 miles west) and Headley Court (5.9 miles north). For a walk, there’s Reigate Heath and Box Hill.
How the job changes by surface
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We check the joints and say so if the fault looks to be elsewhere.
Sinks & splashbacks
Next to the sink, the sealant has to cope with constant water, including a food-safe sealant where that’s needed. The bead is finished smooth so it wipes clean.
North Holmwood questions
Do you work in hotels near North Holmwood?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
I let a flat near Dorking West station. Can you help?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can mouldy silicone be sorted out?
Yes, by replacing the sealant. Sprays can fade the marks, but cutting it out and resealing is what lasts. Good ventilation helps keep it away.
How long will the resealing take?
A single bath or shower takes about a couple of hours, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.
How long does the new silicone need before I use the shower?
We give you the cure time before we leave, and it’s generally around 24 hours. Getting it wet too early can spoil the new joint.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
How to look after the new joints
Simple care keeps the joints in good condition. We recommend:
- Clean with a mild bathroom cleaner and a soft cloth
- Check the joints every few months for splits or lifting
- Never pick at the silicone with a blade
- Wipe up water along the back of the worktop
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.