Aberdeenshire · Scotland
Bathroom Resealing in Lumsden
Baths, showers and worktops in Lumsden need attention? We remove the old material, prepare the joints and seal them properly.
- Water getting behind the bath panel
- New sealant laid over old sealant that is now lifting
- A messy, uneven bead from a previous reseal
About our bathroom resealing in Lumsden
Resealing is a small job that makes a big difference. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. We work on sinks & splashbacks, baths and wet rooms, and the jobs we see most are smears of silicone across the tiles and splits where the tray meets the wall.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
The work is covered for a year after we finish. If anything isn’t right with it, drop us a line at info@mrmastic.co.uk.
- Location
- Lumsden (AB54)
- Wider area
- Aberdeenshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Updated
- 26 October 2026
When to call us in Lumsden
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone cannot grip the old bead underneath, so it lifts, lets water in and traps mould underneath.
It’s worth asking for a quote if you see:
- Shrunken sealant along the back of a worktop
- Black mould in the silicone that will not clean off
- Cracked, shrunken or lifting silicone
- A joint torn by a bath that flexes
In and around Lumsden, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
What to look for in a quote
- Who does the work, and how experienced they are
- What happens if they find a problem under the old sealant
- What the cure time is
- What product goes in the joint
Places near Lumsden
What else we do in Lumsden
Why it’s worth doing now in Lumsden
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, turning a small job into a building repair. In an older home around Lumsden, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
The cost reflects the work involved, not a rough estimate. That’s why we ask a few questions first and give you a clear quote before any work starts.
Why us?
- Homes, businesses and hotels
- Rated 4.9 stars on Google
- We never seal over old sealant
- Over 20 years’ experience
See our cost guide or customer reviews.
When it isn’t the sealant
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Water coming from the plumbing rather than the joint
- Failed grout lines across the wall
- A tray that rocks until it’s re-bedded
If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Shower trays & enclosures
- Baths
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
- Kitchen worktops & upstands
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
FAQs for Lumsden
Can you do bathroom resealing in Lumsden?
Yes, Lumsden is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Do you cover smaller places like Lumsden?
Yes, we do. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
How long does it take to reseal a bath or shower?
It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.
Can you quote for more than one area?
Yes. Just list everything you need and you’ll get one quote.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us.
Can you just seal over the old silicone?
No. Sealing over the top looks fine for a few weeks, then lifts, because silicone doesn’t bond to silicone. Every trace of the old bead is removed first.
Is white the only colour available?
You are not limited to white: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.
My sealant has gone black. Can you sort it?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
What happens on the day
Before we leave, we go over the finished joints with you. The work normally takes half a day or less for one room, longer when the kitchen is included, depending on the amount of work. Outside jobs in Lumsden need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We tidy up and give you the cure time, generally around 24 hours.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Mention any tricky access
- Let us know about earlier repairs to the joints
Ask for a quote
We quote each job on its own. Just drop us a line at info@mrmastic.co.uk with the details and send photos if you have them.
Read more
How we quote for bathroom resealing
Some jobs are bigger than they look, and some smaller. The main factors:
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- How we’d reach the joints
- If it’s domestic, commercial or a hotel
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Different surfaces, different methods
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. We reseal it along with the base of the enclosure, following the enclosure maker’s guidance on which side to seal.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.
Bathroom resealing in Lumsden: local notes
Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Whether the job is in Lumsden itself or nearby, the right material for each joint matters as much as a neat finish.
Lumsden is about 18 miles west of Inverurie, in Aberdeenshire. Homes, rented property, offices and hotels in Lumsden is covered for bathroom resealing. Every job comes with our 12-month guarantee. 161 places in Aberdeenshire are on our list, large and small. Aberdeen is on our list too, about 30 miles from Lumsden.
Postcode districts we cover here for bathroom resealing: AB54. Local streets include The Square and Main Street, all of which we cover. Other places close to Lumsden include Cottown (3 miles north-east), Rhynie (4 miles north-east), Tullynessle (5 miles east), Towie (6 miles south) and Bridge of Alford (6 miles south-east). Larger places within reach include Huntly (12 miles north), Aboyne (15 miles south), Alford (7 miles south-east) and Insch (10 miles east). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Lumsden
Other landmarks nearby include Brux Castle (3.3 miles south). The countryside around Lumsden includes The Buck.