Buckinghamshire · England
Bathroom & kitchen resealing in Kingswood, Buckinghamshire
We cover Kingswood for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Shrunken sealant along the back of a worktop
- Smears of silicone across the tiles
- Two layers of silicone, both failing
About our bathroom resealing in Kingswood
With over 20 years in the trade, we reseal baths, showers and kitchens in homes across Kingswood. We are ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. If you have leaking joints on a shower screen and gaps between the worktop and the wall, we can put it right.
Somewhere as small as Kingswood, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Where
- Kingswood (HP18)
- Wider area
- Buckinghamshire
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
The process
On the day, we look over the joints with you first. We protect the surfaces around the joints before any work starts. Most jobs take a morning or an afternoon for most single baths and showers. Somewhere like Kingswood needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Let us know if you’ve seen damp or leaks
- Let us know about parking restrictions
- Move anything stored near the joints
How to get a quote
Getting a quote is simple: let us know the job and the location. A few pictures by email make the job easier to understand.
Read more
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Check the joints every few months for splits or lifting
- Keep bottles off the sealant line
- Let new sealant cure fully before it gets wet
- Run the extractor fan during and after every shower
Have a look at the joints every few months. Small splits and lifting ends are easy to catch early, so if something doesn’t look right, just phone 0345 464 0079 or email us.
A few black dots in the silicone soon become a black line. When it has grown right through, it rarely cleans out. Catching it early keeps it a simple reseal.
Landlord and commercial work in Kingswood
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
We work for landlords and letting agents as well as homeowners. Resealing between tenancies keeps a property looking cared for.
Quotes for bathroom resealing in Kingswood
Every job gets its own quote. This is what makes a difference:
- Mould in or behind the old joints
- How much old sealant there is and how hard it is to remove
- How many areas need sealing
- When we can work, for business premises
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Helping us quote
When you contact us, these details help:
- The address or postcode of the job
- A few pictures by email, if you can
- What’s wrong with the joints now
- Access, such as stairs, a lift or height
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Leave it or put it right?
The difference in a professional reseal is mostly what you don’t see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead will not last. Around Kingswood, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we’ll go through it with you.
Why book with us
- Sealant colour chosen to suit
- You choose the colour before work begins
- Fully insured
- Homes, businesses and hotels
Take a look at what affects the cost or what customers say.
Other services in Kingswood
Common questions in Kingswood
Is bathroom resealing in Kingswood guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Is Kingswood within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Will the old sealant be removed?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
How long does a bath or shower reseal take?
That depends on the number of joints and the state of the old sealant. Allow a couple of hours for a typical bath or shower.
Is it OK to put new sealant on top of the old bead?
No. Fresh silicone cannot stick to the old bead, so it lifts and traps water and mould underneath. All the old sealant comes out first.
Are you fully insured?
Yes. We’re fully insured.
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
Bathrooms and kitchens in Kingswood
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
In and around Kingswood, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint. Schools such as Grendon Underwood Combined School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Kingswood is about 7 miles east of Bicester, in Buckinghamshire. Kingswood gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Kingswood is one of 263 towns and villages in Buckinghamshire where we work for bathroom resealing. Oxford is on our list too, around 13 miles away.
Work in HP18 is quoted and booked the same way as anywhere else. Bathroom resealing is available to properties on Grendon Road and Kingswood Lane and the roads around them. Neighbouring places we cover for bathroom resealing include Westcott (2 miles south-east), Quainton (3 miles east), Ashendon (3 miles south), Waddesdon (4 miles south-east) and Wormstone (4 miles south-east). Within a short drive, we also cover Aylesbury (8 miles south-east), Buckingham (9 miles north), Elmhurst (9 miles east), Southcourt (9 miles south-east), Princes Risborough (12 miles south-east) and Haydon Hill (7 miles south-east).
What’s near Kingswood
We work in homes and buildings around The Akeman Inn, among other places. Open spaces near Kingswood include Upper Ray Meadows.
What sealant work can’t fix
We’d rather tell you now than do work that won’t last, so these are the limits:
- A bath or tray that moves because it is not properly supported
- Cracks in the tray itself rather than the joint
- Water coming from the plumbing rather than the joint
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Baths
- Kitchen worktops & upstands
- Wet rooms
- Shower trays & enclosures
- Sinks & splashbacks
- Basins & vanity units