West Sussex · England
Bathroom Resealing in Keymer
Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Keymer. Fully insured, ARBOMaster approved and guaranteed for a year.
- New sealant laid over old sealant that is now lifting
- Damp behind the bath or under the tray
- Water escaping at the shower enclosure
Looking after it afterwards
So the new joints stay in good condition:
- Run the extractor fan during and after every shower
- Move toiletries away from the joint
- Do not leave water standing on kitchen joints
- Keep scourers and sharp tools away from the bead
Have a look at the joints every few months. A small split or a corner lifting is easy to spot, so if something does not look right, just call 0345 464 0079 or drop us an email.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and replacing it when it fails protects the rest of the room.
How we handle bathroom resealing in Keymer
We fill the bath before sealing it. The weight settles the bath to its lowest point, so the bead is not stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. Common call-outs are for gaps between the worktop and the wall and mouldy sealant that has gone black, across kitchen worktops & upstands, wet rooms and shower trays & enclosures.
Even in a smaller place like Keymer, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Keymer (BN6)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What bathroom resealing looks like in Keymer
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings. There are hotels and other places to stay in and around Keymer. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
In the older streets around St Cosmas and St Damian Church, older homes can move a little, which is hard on rigid grout and tired sealant. If you let a flat or house near Hassocks station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Schools such as The Windmills Junior School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Keymer is about 2 miles south of Burgess Hill, in West Sussex. Wherever you are in the BN6 postcode area, we can carry out bathroom resealing at your property. 371 places in West Sussex are on our list, from the larger towns to small villages. Brighton is on our list too, about 6 miles from Keymer.
We cover every part of the BN6 postcode area for bathroom resealing and the streets around it. Streets in the area include Flowers Close, The Quadrant and Kymer Gardens, all of which we cover. If you’re just outside Keymer, we cover Hassocks (1 mile west), Ditchling (1 mile east), Clayton (1 mile south-west), Hurst Wickham (1 mile north-west) and Westmeston (2 miles south-east). Further out, we also cover Crawley (13 miles north), Horsham (13 miles north-west), Worthing (14 miles south-west), Haywards Heath (5 miles north), East Grinstead (15 miles north) and Shoreham-by-Sea (8 miles south-west).
Local landmarks in Keymer
Around Keymer, our work takes us to homes and buildings near The Greyhound Public House and Downlands Community School. Keymer’s nearest station is Hassocks station, about 0.5 miles west. A little further out are The Dene Hospital (3.2 miles north-west) and Clayton Castle (1.2 miles south-west). Open spaces near Keymer include Ditchling Beacon and Bedelands Farm Nature Reserve.
Nearby places to Keymer
What else we do in Keymer
What we do, step by step
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and tidy away. It usually takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. A visit to Keymer is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Mention any tricky access
- On commercial sites, let us know about site rules
- Keep pets and children clear of the area while we work
How to get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
Why it’s worth doing now in Keymer
A clean new bead makes a room look cared for, which helps when a home is being let or put on the market. Lumpy sealant with smears on the tiles has the opposite effect. Around Keymer, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins.
Why book with us
- Every job guaranteed for a year
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
- 4.9 on Google from 180+ five-star reviews
Questions from Keymer
Do you work for hotels and guest houses in Keymer?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Can you help a landlord with a rental near Hassocks station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
My sealant has gone black. Can you sort it?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
How long will the resealing take?
A single bath or shower takes about a couple of hours, old sealant removal included. A full bathroom and kitchen can take most of a day.
Is the work guaranteed?
Yes, a one-year guarantee. Good ventilation and gentle cleaning help it last.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
How we quote for bathroom resealing
Your quote is based on your job. We take into account:
- How much old sealant there is and how hard it is to remove
- How much there is to do
- The number of rooms or windows
- How easy the joints are to reach
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
Asking for a quote
Photos help, but a description is a good start. Try to tell us:
- The problem you’ve noticed
- Roughly how big the job is
- Whether it’s a home or a business
- Where the property is
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
Honest limits
A few problems are outside what sealant work can do:
- Failed grout lines across the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath or tray that moves because it is not properly supported
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think before booking.
What we seal
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
Landlord and commercial work in Keymer
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.