Brighton and Hove · England
Bathroom & kitchen resealing in Falmer, Brighton and Hove
Our applicators work in Falmer on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Smears of silicone across the tiles
- Mouldy sealant that has gone black
- Damp behind the bath or under the tray
Aftercare tips
To keep the joints looking good and working properly:
- Wait for the cure time we give you
- Squeegee the walls and tray after use
- Never pick at the silicone with a blade
- Don’t leave water standing on kitchen joints
Clean the silicone with care: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, and a nicked bead lets mould in sooner.
There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and replacing it when it fails protects the rest of the room.
How we handle bathroom resealing in Falmer
It isn’t only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback get wet every single day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you have splits where the tray meets the wall and water getting behind the bath panel, we can help, on sinks & splashbacks, shower trays & enclosures and kitchen worktops & upstands alike.
Around Falmer, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
There’s a 12-month guarantee on every job, large or small.
- Location
- Falmer (BN1)
- Region
- Brighton and Hove
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What we are called out for in Falmer
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
Any of these means the joints need attention:
- Gaps where the bath or tray has moved
- Water escaping at the shower enclosure
- A bead that has pulled away from the tiles
- Water getting behind the kitchen upstand
In the older streets around The Parish Church of St Lawrence, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What to look for in a quote
- How hidden problems are handled
- How the colour is chosen
- Whether they seal over old material or remove it
- Are they insured?
What we do, step by step
You do not need to clear the whole room or building before we come, just the space around the work. We protect the rest, and the work takes a couple of hours for a single bath or shower for a typical job. Somewhere as small as Falmer, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
- Let us know if you’ve seen damp or leaks
Get a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.
Advice
Different surfaces, different methods
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. If water gets in, the cabinet underneath can swell, so a neat, continuous bead matters.
Wet rooms
Not every wet room leak is a sealant problem. We check the joints and say so if the fault looks to be elsewhere.
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- A tray that rocks until it’s re-bedded
- Failed grout lines across the wall
- A leaking waste, trap or valve
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Joints and surfaces we work on
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & upstands
- Sinks & splashbacks
Questions from Falmer
Is Falmer in your area for bathroom resealing?
Yes, Falmer is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
Can you help a landlord with a rental near Falmer station?
Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.
Do you hold any approvals?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Can new silicone go straight over the old?
No. Fresh silicone cannot stick to the old bead, so it lifts and traps water and mould underneath. All the old sealant comes out first.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us and we are fully insured.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
For landlords and businesses
We also work for property managers and facilities teams in Falmer and across Brighton and Hove. Several sites can be quoted together, and we are fully insured for the work.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can be quoted together.
Towns and villages near Falmer
Other services in Falmer
Why it’s worth doing now in Falmer
Tired sealant isn’t a reason to replace a bath or shower. Replacing the joint is generally all it takes. If we find a deeper problem, you will hear it from us. In a small place like Falmer, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
Why book with us
- Experience in homes, commercial sites and hotels
- Approved under the ARBOMaster scheme
- Rated 4.9 stars on Google
- A 12-month guarantee on all work
Read what affects the cost or what customers say.
Falmer homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
Rented homes near Falmer station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. Schools such as Brighton Aldridge Community Academy are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Falmer is about 3 miles north-east of Brighton, in Brighton and Hove. Wherever you are in the BN1 postcode area, our applicators can take on bathroom resealing. Falmer is one of 30 places in Brighton and Hove where we work.
Our applicators cover all of the BN1 postcode area for bathroom resealing. That includes homes and businesses on Middle Street, Park Street and Mill Street and the roads around them. Other places close to Falmer include Kingston near Lewes (2 miles east), Iford (3 miles east), Ovingdean (3 miles south), Rottingdean (3 miles south) and Roedean (3 miles south). Larger places within reach include Brighton (3 miles south-west), Brighton and Hove (5 miles west), Hove (5 miles south-west), Carlton Hill (4 miles south-west), Hanover (3 miles south-west) and West Hill (4 miles south-west).
Landmarks near Falmer
Locally, jobs take us to homes and businesses close to The Swan Inn, University of Sussex Library and Stanmer Park and the streets around them. Falmer has its own railway station: Falmer station. Well-known places in the area include Brighton And Hove Albion Football Club Museum (within half a mile south-west) and Lewes Castle (3.8 miles east). The countryside around Falmer includes Bevendean Down and Newmarket Hill.