West Berkshire · England

Colthrop Bathroom Resealing

Bathroom resealing for Colthrop, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Mouldy sealant that has gone black
  • A bead that has pulled away from the tiles
  • A joint torn by a bath that flexes

Bathroom resealing near Colthrop

What we can’t put right

We’d rather tell you now than do work that will not last, so these are the limits:

  • A bath or tray that moves because it isn’t properly supported
  • Cracked or missing grout between tiles (that is regrouting)
  • Loose or hollow tiles, or failed tanking behind them

If you’re not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.

Joints and surfaces we work on

  • Baths
  • Kitchen worktops & upstands
  • Sinks & splashbacks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures

How we handle bathroom resealing in Colthrop

Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Colthrop. We’re ARBOMaster approved and fully insured, and every job carries our one-year guarantee. Typical jobs include shrunken sealant along the back of a worktop and sealant that has split, shrunk or peeled away, across kitchen worktops & upstands, shower trays & enclosures and wet rooms.

For a small place like Colthrop, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

Whatever the size of the job, it’s backed by our one-year guarantee in Colthrop and across West Berkshire.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Where
Colthrop (RG19, RG18)
Wider area
West Berkshire
Guarantee
One year on every job
Quotes
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

Looking after it afterwards

How long the joints last depends on use and care. Here’s what we suggest:

  • Stick to a soft cloth and a mild cleaner
  • Keep an eye on the corners, where splits start
  • Keep bottles off the sealant line
  • Avoid abrasive pads on the sealant

Keep water off the new bead until it has cured, which is normally around 24 hours. After that, a quick wipe after showering helps keep it clean.

Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning generally won’t remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.

Different surfaces, different methods

Shower trays & enclosures

The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.

Basins & vanity units

Basin joints are short and close to eye level: so we keep the line tidy and even, finished in a colour that suits the basin.

How the visit works

Before we leave, we go over the finished joints with you. The visit itself usually takes a morning or an afternoon for most single baths and showers, depending on the size of the job. Somewhere as small as Colthrop, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. Protection goes down around the bath, shower or worktop.
  2. We cut away the old sealant and clean off what’s left.
  3. Mould is treated, then the joint is left to dry thoroughly.
  4. Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
  5. We finish the joint, clear up and tell you how long to leave it before it gets wet.

Before we arrive

  • For business premises, tell us about site rules or sign-in
  • Let us know about stairs, lifts or work at height
  • Clear the area around the work

Ask for a quote

Need a quote? Please phone 0345 464 0079 or drop us an email with a few details. We’ll explain what we’d do and give you a clear price before we start.

Get a quick quote

Related advice

DIY sealant or a professional job?

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

Colthrop homes and their sealant

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Schools such as Francis Baily Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Letting a property close to Thatcham station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

Colthrop is about 1 mile east of Thatcham, in West Berkshire. Every kind of property in Colthrop can book us for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Colthrop is one of 155 towns and villages in West Berkshire where we work. You can also see our page for Reading, about 12 miles away.

We cover every part of RG19 and RG18 for bathroom resealing. Streets in the area include Bath Road, Ashman Road and Fokerham Road, and we cover them all. Nearby, we also carry out bathroom resealing in Crookham (2 miles south-east), Hyde End (2 miles south-east), Heads Hill (2 miles south-west), Mill Green (2 miles south) and Goose Hill (3 miles south). We also work in nearby towns such as Newbury (4 miles west), Burghfield Common (8 miles east), Speenhamland (4 miles west), Hungerford (12 miles west), Spencers Wood (12 miles east) and Calcot (9 miles east).

Landmarks near Colthrop

In Colthrop, that means homes and buildings near The Swan pub and Kennet School. The nearest railway station is Thatcham station, roughly 0.5 miles south-west. Well-known places in the area include Old Chapel Textile Centre (2.6 miles south-west) and Donnington Castle (4.6 miles west). Not far away are Thatcham Reed Beds.

Map of Colthrop © OpenStreetMap contributors

FAQs for Colthrop

Do you work for landlords with property near Thatcham station?

Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.

Can you do bathroom resealing in Colthrop?

Yes. Our work covers London and the South East, and Colthrop is part of that. Just call 0345 464 0079 or email us with a few details of the job, and we will give you a clear quote.

What should I tell you?

Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply call 0345 464 0079 or email us.

What colours of sealant can you use?

You are not limited to white: clear, white and colours chosen to suit the room. We will talk it through when we quote.

How long does a bath or shower reseal take?

One bath or shower is around two hours’ work, including cutting out the old sealant. A full bathroom and kitchen can take most of a day.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Do you take out the old sealant first?

Yes. All of the old material is cut out and the joint cleaned before applying anything new.

Do I have to be there?

That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.

What affects the quote in Colthrop

We don’t publish a price list, because no two jobs are the same. The quote depends on:

  • The size of the job
  • How many rooms, windows or areas are involved
  • Whether there’s mould to deal with
  • How much old sealant there is and how hard it is to remove

Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, call 0345 464 0079 or email us and we will give you an honest view and a quote.

What we need to know

To make quoting easier, let us know:

  • What the problem is, such as mould, gaps, leaks or cracking
  • Access, such as stairs, a lift or height
  • How many joints, rooms or windows are involved
  • Photos by email, if that is easy

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.

Do you need bathroom resealing in Colthrop?

Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.

Most people get in touch after spotting something like this:

  • Water escaping at the shower enclosure
  • Water getting behind the kitchen upstand
  • Mouldy sealant that has gone black
  • Leaks into the floor or ceiling below

For an older house near a landmark such as St Mary's Church, older homes can move a little, which is hard on rigid grout and tired sealant.

What to look for in a quote

  • How hidden problems are handled
  • How long the guarantee is
  • How the joint is cleaned and prepared
  • Whether they’re fully insured

10 questions to ask before you book

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job