Surrey · England
Bathroom Resealing in Brookwood
Bath, shower, basin, wet room, worktop and sink resealing for homes and businesses in Brookwood and across Surrey. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- A reseal done over the top of the old bead
- Leaks into the floor or ceiling below
- Gaps between the worktop and the wall
Bathrooms and kitchens in Brookwood
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
In the older streets around Saint Saviour's Church, older homes can move a little, which is hard on rigid grout and tired sealant. For site and facilities teams at buildings such as Brookwood Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Brookwood is about 3 miles west of Woking, in Surrey. We carry out bathroom resealing for homeowners, landlords and businesses in Brookwood, as part of our work across Surrey. 395 places in Surrey are on our list, from the larger towns to small villages. Our Reading page covers work nearby (18 miles or so).
Here we cover the GU24 postcode area for bathroom resealing. Whether your property is on Sheet's Heath Lane, Connaught Road and Heath Drive or anywhere close by, our applicators can take on the job. Neighbouring places we cover for bathroom resealing include Sheet's Heath (1 mile north), Knaphill (1 mile north-east), Bisley (1 mile north), Lucas Green (2 miles north) and West End (2 miles north). Further out, we also cover Guildford (5 miles south-east), Woking (3 miles east), Camberley (4 miles north-west), Farnham (9 miles south-west), Egham (9 miles north-east) and Walton-on-Thames (11 miles north-east).
Near you in Brookwood
We work in homes and buildings around Knowl Hill School, Nag's Head Inn and Brookwood Lye, among other places. Brookwood has its own railway station: Brookwood station. Nearby you will also find Brookwood Hospital (1.1 miles north-east) and The Peacocks (3.5 miles east). The countryside around Brookwood includes Brookwood Lye.
Bathroom resealing in Brookwood, done properly
A reseal only lasts if the joint is properly prepared. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. Only once it’s dry does the new bead go on. We’re often asked to deal with two layers of silicone, both failing and splits where the tray meets the wall, on wet rooms, sinks & splashbacks and kitchen worktops & upstands.
For a small place like Brookwood, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
A 12-month guarantee comes as standard, so you’re not left on your own once the job is done.
- Location
- Brookwood (GU24)
- Wider area
- Surrey
- Guarantee
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What affects the quote in Brookwood
The price is agreed before any work begins. It’s based on:
- Whether there’s mould to deal with
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We will give you a clear quote for the lot.
Helping us quote
Before you ask for a quote, have a think about:
- Access, such as stairs, a lift or height
- Whether it has been sealed before
- Whether it’s a home or a business
- Roughly how big the job is
Every job is quoted individually, so the first step is telling us about yours. Just phone 0345 464 0079 or drop us an email with the details.
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Check the joints every few months for splits or lifting
- Never pick at the silicone with a blade
- Dry worktop joints after washing up
- Stick to a soft cloth and a mild cleaner
In a kitchen, do not let water sit along the back of the worktop. The drier the joint stays, the longer it lasts.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning usually will not remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
What we’re called out for in Brookwood
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.
People normally contact us when they notice one of these:
- A bead that has pulled away from the tiles
- A messy, uneven bead from a previous reseal
- Leaking joints on a shower screen
- Mouldy sealant that has gone black
If you let a flat or house near Brookwood station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- How much experience the applicator has
- Whether the sealant suits the joint
- What the cure time is
- How hidden problems are handled
What we do, step by step
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. For a village or hamlet like Brookwood, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- We tool the bead to a neat finish and give you the cure time, generally around 24 hours.
How to prepare
- Clear the area around the work
- Tell us about any previous sealing or DIY attempts
- Mention any leaks or damp you’ve noticed
Getting a quote
Asking for a quote is easy: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will take it from there.
Advice
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. Water creeps under it and mould follows, and the next reseal means two layers to cut out. Around Brookwood, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, call 0345 464 0079 or send us an email and we will give you an honest view and a quote.
Why book with us
- Experience in homes, commercial sites and hotels
- Trusted Arbo and Everbuild sealants
- ARBOMaster approved applicator
- A 12-month guarantee on all work
See our cost guide and our reviews.
Different surfaces, different methods
Sinks & splashbacks
Around the sink, we use a product suited to kitchens, including a food-safe sealant where that’s needed. The joint is laid neatly so it’s easy to wipe.
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Common questions in Brookwood
Will you come out to Brookwood?
Yes. Brookwood is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Brookwood station. Can you help?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Can you get rid of the black mould in my sealant?
Yes, we can. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Can you reseal around my kitchen sink and worktop?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected.
DIY sealant or a professional job?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.