Surrey · England

Bathroom & kitchen resealing in Brook, Surrey

Bathroom resealing for Brook, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Shrunken sealant along the back of a worktop
  • A reseal done over the top of the old bead
  • Cracked, shrunken or lifting silicone

Bathroom resealing in Brook

What we can’t put right

It helps to know what we cannot do too:

  • A leaking waste, trap or valve
  • Failed grout lines across the wall
  • A cracked shower tray or bath (that needs repair or replacement)

Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly before you book.

What we seal

  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & upstands
  • Sinks & splashbacks
  • Basins & vanity units
  • Baths

Bathroom resealing for homes and businesses in Brook

The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We work on sinks & splashbacks, baths and shower trays & enclosures, and common reasons people get in touch are smears of silicone across the tiles and black spots spreading through the bead.

For a small place like Brook, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. Once we are there, the bathroom or kitchen gets the same care as anywhere else.

All our work comes with our one-year guarantee.

Where
Brook (GU8)
Wider area
Surrey
Guarantee
12 months on all our work
Quote
Quoted before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026
Applicator in a navy top running a bead of silicone up a shower screen wall profile

Looking after it afterwards

How long the joints last depends on use and care. Here’s what we suggest:

  • Use gentle cleaners on the silicone
  • Check the joints every few months for splits or lifting
  • Keep the fan on for a while after bathing
  • Avoid abrasive pads on the sealant

In a kitchen, do not let water sit along the back of the worktop and keep hot pans off the bead. A dry joint lasts longer.

A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. A reseal in time can save the worktop.

DIY sealant or a professional job?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

Questions from Brook

Can you do bathroom resealing in Brook?

Yes, Brook is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we’ll give you a clear quote.

Do you work for landlords with property near Witley station?

Yes. We work for landlords and letting agents as well as householders. Just ring 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.

Can I add another job to the visit?

Yes, and it often makes sense. Combining jobs makes good use of the visit.

Can I choose the colour of the sealant?

You’re not limited to white: clear, white and colours chosen to suit the room. We can help you pick when we quote.

Do you remove the old sealant?

Yes. We cut out all the old sealant and clean the joint before resealing.

Are you ARBOMaster approved?

Yes. We’re approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.

How long does the new silicone need before I use the shower?

Silicone is touch-dry quite quickly, but it takes longer to cure. Leave it around 24 hours before it gets wet, or follow the cure time we give you.

How long does it take to reseal a bath or shower?

It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.

The process

Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen and we leave things clean and tidy. In a small place like Brook, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First, each joint is checked for movement and signs of water.
  2. Every trace of the old bead is removed, including the thin smear on the tiles.
  3. The joint is cleaned, degreased and treated for mould.
  4. With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
  5. The bead is tooled smooth and you’re told the cure time, usually around 24 hours.

Preparing for the visit

  • Where the joints are inside, avoid wetting them before we arrive
  • Clear the area around the work
  • Let us know about stairs, lifts or work at height

Ask for a quote

If you are in Brook and need bathroom resealing, ring 0345 464 0079 or email us. Tell us what the problem is and where, and we will agree the price before any work begins.

Ask for a quote

Related advice

What we’re called out for in Brook

No sealant lasts indefinitely. Every shower, every splash and every wipe with a cleaner slowly wear it down, so its life depends on how the room is used, cleaned and aired.

Any of these means the joints need attention:

  • New sealant laid over old sealant that is now lifting
  • Lumpy, uneven sealant from a DIY attempt
  • Water getting behind the kitchen upstand
  • Leaks into the floor or ceiling below

Managing a site like King Edward's School Witley? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

What your quote should include

  • Is the old sealant removed completely?
  • What happens if the job turns out different
  • What the quote includes, VAT included or not
  • What guarantee comes with the work

Our hiring checklist

Leave it or put it right?

Most of the work in a good reseal happens before any silicone goes on: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early. Around Brook, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.

Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, ring 0345 464 0079 or email us and we’ll give you an honest view and a quote.

What you get with us

  • Any old sealant cut out fully, not covered over
  • Over 20 years’ experience
  • Neat joints and a tidy finish
  • Approved under the ARBOMaster scheme

See our cost guide or what customers say.

For landlords and businesses

Landlords and letting agents in Brook can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.

What bathroom resealing looks like in Brook

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

Rented homes near Witley station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

Brook is about 8 miles south-east of Farnham, in Surrey. Every kind of property in Brook is covered for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Across Surrey, we cover 395 places, Brook among them. There’s also a page for Crawley, roughly 21 miles from Brook.

Our applicators cover all of the GU8 postcode area for bathroom resealing. Bathroom resealing is available to properties on Brook Road, Church Lane and Park Lane and the roads around them. Neighbouring places we cover for bathroom resealing include Sandhills (1 mile east), Wormley (1 mile east), Bowlhead Green (1 mile west), Witley (2 miles north-east) and Hambledon (2 miles east). Further out, we also cover Guildford (9 miles north-east), Woking (13 miles north), Camberley (14 miles north), Farnham (8 miles north-west), Frimley (13 miles north) and Haslemere (4 miles south-west).

Local landmarks in Brook

Typical jobs here are in homes near Rodborough and Dog And Pheasant Public House and the streets around them. The nearest railway station is Witley station, roughly 1 mile east. Nearby you’ll also find Milford Hospital (3 miles north-east). For a walk, there’s Gibbet Hill and Upper Lake.

Map of Brook © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job