Essex · England

Althorne Bathroom Resealing

Baths, showers and worktops in Althorne need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.

  • Failed sealant on the screen profile
  • Damp behind the bath or under the tray
  • Gaps between the worktop and the wall

Trusted bathroom resealing in Althorne

Landlords, agents and businesses in Althorne

We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.

If you manage several properties in or around Althorne, jobs at different addresses can be quoted together. Send us the addresses and the work at each.

About our bathroom resealing in Althorne

A fresh bead of silicone changes how a bathroom looks more than most people expect. Black, patchy sealant makes clean tiles look tired, and a clean white or clear joint fixes it quickly. Just as important, it closes the gaps water would otherwise get through. Typical jobs include smears of silicone across the tiles and damp behind the bath or under the tray, across baths, basins & vanity units and shower trays & enclosures.

Somewhere as small as Althorne, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.

Big or small, you get the same one-year guarantee in Althorne and across Essex.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Where
Althorne (CM3)
Wider area
Essex
Guarantee
12 months on all our work
Quotes
A clear price before we start
Call
0345 464 0079
Updated
26 October 2026

Keeping the joints in good condition

No joint lasts for ever, but care makes a real difference. A few tips:

  • Squeegee the walls and tray after use
  • Keep the fan on for a while after bathing
  • Let new sealant cure fully before it gets wet
  • Keep bottles off the sealant line

Check the sealant now and then. A small split or a corner lifting is easy to spot, and if anything looks wrong, just call 0345 464 0079 or send us an email.

Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.

The process

Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes half a day or less for one room, longer when the kitchen is included. For a village or hamlet like Althorne, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First the area is protected and every bit of old sealant removed, including the film left on the tiles.
  2. We clean and degrease the joint and treat any mould.
  3. Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. We tidy up and give you the cure time, usually around 24 hours.

Before we arrive

  • Tell us about access, such as stairs, a lift or high-level joints
  • Plan for the work area to be out of bounds to pets and children
  • Clear the area around the work

How to get a quote

Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand.

Get a quick quote

Related advice

When to call us in Althorne

Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.

Keep an eye out for any of the following:

  • Water escaping at the shower enclosure
  • Water getting behind the bath panel
  • A reseal done over the top of the old bead
  • Lumpy, uneven sealant from a DIY attempt

Rented homes near Althorne station change hands often, and fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.

What to look for in a quote

  • How much experience the applicator has
  • What happens if the job turns out different
  • The length of the guarantee
  • Whether the sealant suits the joint

10 questions to ask before booking

Bathrooms and kitchens in Althorne

Althorne is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

For an older house near a landmark such as Parish Church of St Andrew, timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Althorne is about 5 miles north-east of Rochford, in Essex. Homes, rented property, offices and hotels in Althorne is covered for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Across Essex, we cover 644 places, Althorne among them. Our Chelmsford page covers work nearby.

Here we cover the CM3 postcode area for bathroom resealing. Bathroom resealing is available to properties on Station Road, Fambridge Road and Chestnut Farm Drive and the roads around them. We also cover Latchingdon (2 miles north-west), Mayland (2 miles north), Ostend (2 miles east), Maylandsea (2 miles north) and Creeksea (2 miles south-east). Within a short drive, we also cover Chelmsford (13 miles north-west), Basildon (14 miles south-west), Maldon (6 miles north-west), Canvey Island (12 miles south-west), Billericay (14 miles west) and Rayleigh (8 miles south-west).

Local landmarks in Althorne

We work in homes and buildings around The Black Lion Public House and the streets around them. Althorne’s nearest station is Althorne station, roughly 0.5 miles south of the centre. Not far away are Lion Creek and Lower Raypits.

Map of Althorne © OpenStreetMap contributors

Althorne questions

Will you come out to Althorne?

Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Can you help a landlord with a rental near Althorne station?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear quote.

Should I try DIY first?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.

How long will the resealing take?

It depends on how many joints there are and how much old sealant has to come out. For most single baths or showers, allow a couple of hours.

Is white the only colour available?

You’re not limited to white: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.

How long does the new silicone need before I use the shower?

The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.

Where do you work from?

We are a Crawley-based firm. We work across South East England, London and Scotland.

My sealant has gone black. Can you sort it?

Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.

Why it’s worth doing now in Althorne

A quick bead over the top of the old one might look better for a while, but it can’t stick to what’s underneath. Water creeps under it and mould follows. Where a wall is exposed, as many are in small places like Althorne, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.

What you get with us

  • ARBOMaster approved applicator
  • We agree the colour with you first
  • Old sealant always removed completely
  • Anti-fungal silicone where joints get wet

See what affects the cost or customer reviews.

Surface by surface

Wet rooms

A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.

Baths

Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. We finish it with a single, even bead of anti-fungal silicone.

What affects the cost of bathroom resealing

Jobs vary more than people expect. What affects the quote:

  • Working hours on commercial sites
  • The size of the job
  • How much old sealant there is and how hard it is to remove
  • How many rooms, windows or areas are involved

We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.

What we need to know

Photos by email are helpful but not essential. Please mention:

  • Photos by email, if that’s easy
  • How we’d reach the joints
  • Roughly how big the job is
  • Where the property is

There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or email us.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job