Surrey · England

Remedial sealant & repairs in Wormley, Surrey

Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Wormley. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Sealant applied over old sealant that has lifted
  • Kitchen joints letting water behind the worktop
  • Mould trapped under a layer of silicone

Remedial sealant for Wormley homes and businesses

Looking after it afterwards

No joint lasts for ever, but care makes a real difference. A few tips:

  • Keep the room well ventilated
  • Have loose fittings fixed before resealing
  • Don’t wait for a small gap to become a leak
  • Check ceilings under showers for marks

Where we’ve pointed out another fault, have it put right, because the new sealant cannot hold back a problem underneath.

Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.

Remedial sealant for homes and businesses in Wormley

A joint that keeps failing normally has a reason. A tray that moves, a worktop that is not fixed, the wrong sealant or water getting in elsewhere will defeat even a perfect bead. Finding that cause comes before any new sealant. We work on expansion joints, failed movement joints and botched or over-sealed joints, and the jobs we see most are movement joints that have split or pulled away and sealant that came away because the surface wasn’t prepared.

Homes around Wormley are mostly houses and cottages rather than flats. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.

Big or small, you get the same 12-month guarantee in Wormley and across Surrey.

Where
Wormley (GU8)
Region
Surrey
Cover
A year, on every job
Price
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026
Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom

The process

On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a few hours for a typical bath or shower, longer where several layers have been applied, including the tidy-up. Somewhere as small as Wormley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First we find out how and where the joint has failed.
  2. We strip the joint completely, removing any layers below.
  3. We clean the joint, treat any mould and let it dry.
  4. We use the right backing and sealant for any joint that moves.
  5. Finally we finish the joint and talk you through what we found.

Before we arrive

  • Tell us about any previous sealing or DIY attempts
  • Try not to wet indoor joints just before the visit
  • Clear items away from the joints we are working on

Getting a quote

Asking for a quote is easy: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we will take it from there.

Ask for a quote

Advice

How the job changes by surface

Movement & expansion joints

A movement joint must be able to stretch. We remove the failed sealant, fit backing and reseal with a low-modulus product.

Leaking trays & enclosures

If the tray is cracked, or the leak is from the valve or waste, sealant will not fix it. We say so rather than reseal.

What affects the cost of remedial sealant

We quote each job individually. These are the things that affect it:

  • Mould in or behind the old joints
  • Working hours on commercial sites
  • Access and height
  • The number of rooms or windows

Combining jobs into one visit generally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.

What we need to know

A few details help us give you an accurate quote. When you get in contact, it helps to mention:

  • Access, such as stairs, a lift or height
  • Whether it has been sealed before
  • Where the property is
  • What the problem is, such as mould, gaps, leaks or cracking

Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.

What remedial sealant looks like in Wormley

Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.

Homes close to Church of All Saints include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. For site and facilities teams at buildings such as King Edward's School Witley, we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Witley station, botched sealant from a previous quick fix is easier to strip out between tenants.

Wormley is about 8 miles south of Guildford, in Surrey. Across the GU8 area, we can carry out remedial sealant at your property. 395 places in Surrey are on our list, from the larger towns to small villages. For nearby work, see our Crawley page.

We cover every part of GU8 for remedial sealant and the streets around it. Local streets include Petworth Road, Robin Way and Brook Road, all of which we cover. Other places close to Wormley include Sandhills (1 mile west), Hambledon (1 mile east), Brook (1 mile west), Witley (1 mile north) and Chiddingfold (2 miles south). Larger places within reach include Guildford (8 miles north), Woking (13 miles north), Camberley (14 miles north), Farnham (8 miles north-west), Dorking (15 miles north-east) and Frimley (13 miles north).

Around Wormley

In Wormley, that means homes and buildings near Rodborough and Witley CofE Controlled Infant School. Wormley has its own railway station: Witley station. A little further out are Godalming Museum (3.7 miles north) and Milford Hospital (2.3 miles north). Green spaces nearby include Hydon's Ball and Farncombe Wood.

Map of Wormley © OpenStreetMap contributors

What we can’t put right

Sealant isn’t the answer to every problem, and we will tell you before we start. Sealant will not put right:

  • A leaking trap, valve or supply pipe
  • A bath, tray or worktop that moves until it’s properly fixed
  • Failed tanking or loose tiles behind the sealant

If in doubt, phone 0345 464 0079 or email us and we will say what we think.

Joints and surfaces we work on

  • Expansion joints
  • Failed movement joints
  • Shrunken worktop sealant
  • Botched or over-sealed joints
  • Leaking tray & enclosure joints
  • Mouldy bath & shower sealant

What happens if it’s left?

Mould under a bead can’t be reached by cleaning. The layers have to come out, so the joint can be treated and resealed. Around Wormley, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Leaving a failed joint normally makes the job bigger, not smaller. If you’re unsure, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.

What you get with us

  • Over 20 years’ experience
  • Sanitary silicone with an anti-fungal additive in wet areas
  • 4.9 on Google from 180+ five-star reviews
  • Homes, businesses and hotels

Read what affects the cost or what customers say.

Common questions in Wormley

I let a flat near Witley station. Can you help?

Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.

Do you cover smaller places like Wormley?

Yes, Wormley is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Are you an approved applicator?

Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.

Does someone need to be in?

It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.

Do you take out the old sealant first?

Yes, always, and completely. New sealant will not bond properly to old, so the joint is cleaned back first.

Are you fully insured?

Yes. Mr Mastic is fully insured.

Can you remove sealant that is been put over old sealant?

Yes. Stripping layered sealant takes longer than a normal reseal, but it’s what makes the new bead last.

Where do you work from?

We work from Crawley. Our applicators cover Wormley.

Work for landlords, hotels and businesses

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job