Hampshire · England
Remedial sealant & repairs in Tourner Bury, Hampshire
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Tourner Bury and across Hampshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Mould trapped under a layer of silicone
- Leaks that keep coming back after resealing
- Torn expansion joints
Aftercare tips
How long the joints last depends on use and care. Here’s what we suggest:
- Keep movement joints clear of mortar and paint
- Ask why a joint failed before redoing it
- Keep an eye on the ceiling below the bathroom
- Keep bleach and abrasives off the bead
Do not let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Any of them means it’s time for remedial work.
How we handle remedial sealant in Tourner Bury
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are ARBOMaster approved and fully insured, and remedial work carries our one-year guarantee. We’re often asked to deal with a shower that leaks however often it’s resealed and smears and lumps from a botched reseal, on botched or over-sealed joints, shrunken worktop sealant and mouldy bath & shower sealant.
Being in a small place like Tourner Bury makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Location
- Tourner Bury (PO11)
- Wider area
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Tourner Bury
What else we do in Tourner Bury
How the job changes by surface
Leaking trays & enclosures
If the tray is cracked, or the leak is from the valve or waste, sealant won’t fix it. We’ll tell you what we find.
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath.
FAQs for Tourner Bury
Do you work for hotels and guest houses in Tourner Bury?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you cover smaller places like Tourner Bury?
Yes, we do. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Someone sealed over the old bead. Can you fix it?
Yes. Stripping layered sealant takes longer than a normal reseal, but it’s the only way the new joint will last.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll explain our choice.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we have agreed the job, you don’t need to watch us work.
Is it worth trying it myself?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Where are you based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints.
Tourner Bury homes and their sealant
Tourner Bury is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Warblington station, botched sealant from a previous quick fix is easier to strip out between tenants. Homes close to St Mary's Church include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Tourner Bury is about 1 mile north-east of South Hayling, in Hampshire. Tourner Bury gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Tourner Bury is one of 683 places in Hampshire where we work.
Work in PO11 works the same way as everywhere else we cover. Local streets include Tournerbury Lane, St Benedict Road and Beech Grove, all of which we cover. Neighbouring places we cover for remedial sealant include South Hayling (1 mile south-west), West Town (1 mile west), Tye (2 miles north), Stoke (2 miles north) and North Hayling (2 miles north). Further out, we also cover Gosport (8 miles west), Havant (5 miles north), Fareham (11 miles west), Horndean (8 miles north), Waterlooville (7 miles north-west) and Petersfield (15 miles north).
Around Tourner Bury
Around Tourner Bury, our work takes us to homes and buildings near The Hayling College and The Hayling College. The nearest railway station is Warblington station, about 4.1 miles north. Other landmarks nearby include Eastney Beam Engine House (3.6 miles west) and St James Hospital (3.8 miles west). Open spaces near Tourner Bury include Hayling Billy.
What happens if it’s left?
Adding more sealant is the usual quick fix, and it rarely works. It cannot bond to what’s underneath, leaving the leak in place and one more layer to cut out later. In a small place like Tourner Bury, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, ring 0345 464 0079 or drop us an email and we will give you an honest view and a quote.
Why Tourner Bury clients choose us
- Sanitary silicone with an anti-fungal additive in wet areas
- Homes, businesses and hotels
- We leave the area clean and tidy
- Trusted Arbo and Everbuild sealants
Read what affects the cost or what customers say.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
What affects the quote in Tourner Bury
Call for a quick quote. The main things that affect it are:
- The number and length of the joints
- How many rooms, windows or areas are involved
- When we can work, for business premises
- How much old sealant there is and how hard it is to remove
What it costs depends on how much there is to do, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
Helping us quote
To make quoting easier, let us know:
- The address or postcode of the job
- Whether it’s a home or a business
- A few pictures by email, if you can
- Roughly how big the job is
Getting a quote is simple: let us know what needs doing and where. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
When to call us in Tourner Bury
Using the wrong product is a common cause: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
Keep an eye out for these signs:
- Smears and lumps from a botched reseal
- Kitchen joints letting water behind the worktop
- Repeat leaks from the same joint
- Decorators’ caulk around a bath or shower
Schools such as Mengham Junior School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before you book anyone
- Whether you can choose the colour
- Is the old sealant removed completely?
- Who does the work, and how experienced they are
- Whether VAT is included
How the visit works
A visit follows a simple pattern: we check the joints, protect the area around them, do the work and clear up. Most jobs take a few hours for a typical bath or shower, longer where several layers have been applied. In a small place like Tourner Bury, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
How to prepare
- Mention any tricky access
- Clear items away from the joints we are working on
- Let us know about earlier repairs to the joints
Ask for a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.