East Sussex · England
Telham Remedial Sealant
We cover Telham for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a one-year guarantee.
- Sealant peeling off a dusty or damp surface
- Floor or wall movement joints that have failed
- Wide, uneven beads that look worse than the old ones
About our remedial sealant in Telham
In Telham, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. If you have products that weren’t meant for the joint and sealant applied over old sealant that has lifted, we can help.
Homes around Telham are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
All of our work is guaranteed for twelve months, in Telham and everywhere else we cover.
- Location
- Telham (TN33)
- Region
- East Sussex
- Cover
- A year, on every job
- Price
- A clear price before we start
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Bathrooms and kitchens in Telham
Telham has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you live in an older home near Chapel of the Ascension, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Managing a site like Claverham Community College? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Telham is about 4 miles north-west of Hastings, in East Sussex. If you need remedial sealant in Telham, please ring 0345 464 0079 or drop us an email for a quick quote. We cover East Sussex from our Crawley base, Telham included. Across East Sussex, we cover 289 places, and Telham is one of them. There’s also a page for Brighton, about 28 miles away.
Every address in TN33 is within our area for remedial sealant, from the main roads to the quietest streets. If you need remedial sealant at a property on Hastings Road, Starr's Green Lane and Starrs Mead or anywhere close by, we can help. You’ll find Telham on the A2100, which makes it straightforward to reach. Nearby, we also carry out remedial sealant in Kent Street (2 miles east), Sedlescombe (2 miles north-east), Whatlington (2 miles north), Westfield (3 miles east) and Swaile's Green (4 miles north). Further out, we also cover Eastbourne (13 miles south-west), Hastings (4 miles south-east), Bexhill-on-Sea (5 miles south-west), Hailsham (12 miles west), St Leonards (4 miles south-east) and Polegate (13 miles south-west).
Around Telham
Around Telham, our work takes us to homes and buildings near The Black Horse Public House. Telham’s nearest station is Battle station, about 0.8 miles north-west. Well-known places in the area include Hastings Castle (4.8 miles south-east) and Nortons Farm Museum (1.3 miles north-east). Open spaces near Telham include Senlac Hill and Church Wood and Robsack Wood.
What we do, step by step
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Telham, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We protect the surfaces around the joint.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
Getting ready for the visit
- Keep children and pets away from the work area
- Mention any leaks or damp you’ve noticed
- Move anything stored near the joints
Get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Related advice
What we are called out for in Telham
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, so it tears when the joint moves. Backing sets the depth and stops that.
These are the problems we are asked about most:
- Gaps opening along the back of the worktop
- Caulk or the wrong sealant used in a wet area
- Black mould underneath the bead
- Sealant peeling off a dusty or damp surface
Rented homes near Battle station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Questions to ask before you book
- When the joint can take water or movement
- What guarantee comes with the work
- Whether they’re fully insured
- What product goes in the joint
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Sealant in an older building that needs testing for asbestos first
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Failed tanking or loose tiles behind the sealant
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly.
Joints and surfaces we work on
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
- Shrunken worktop sealant
Surface by surface
Windows & doors
Frames resealed over the top end up with hard, layered mastic. All of it is cut out and the frame and wall cleaned before backing and resealing.
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing stops that, letting the sealant flex between the two faces.
Leave it or put it right?
Adding more sealant is the usual quick fix, and it rarely works. It can’t bond to what’s underneath, leaving the leak in place and one more layer to cut out later. In a small place like Telham, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Combining jobs into one visit is usually more efficient than separate visits. You will get one clear quote for the whole job.
Why book with us
- A 12-month guarantee on all work
- Full insurance on every job
- Trusted Arbo and Everbuild sealants
- Rated 4.9 stars on Google
Towns and villages near Telham
Also in Telham
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Check ceilings under showers for marks
- Clean sealant with mild products only
- Report a tray that rocks or a worktop that lifts
- Keep the room well ventilated
Clean gently: a mild cleaner and a soft cloth, with no blades or scourers.
If a joint has failed more than once, stop resealing it. Get the cause found first, otherwise the next attempt will fail too.
Landlords, agents and businesses in Telham
We also work for property managers and facilities teams in Telham and across East Sussex. Several sites can be quoted together.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Questions from Telham
Do you work in hotels near Telham?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Do you cover smaller places like Telham?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you reseal a split movement joint?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
How long should I leave it?
It depends on the product and the conditions. We tell you how long to leave it before we go.
Can I choose the sealant colour?
In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before work begins.
Will it make a mess?
No. The area is protected while we work and cleaned up afterwards.
Someone sealed over the old bead. Can you fix it?
Yes. Each layer is cut out and the residue cleaned off, before resealing with a single bead.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.