West Sussex · England

Slough Green Remedial Sealant

Remedial sealant for Slough Green, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Wide, uneven beads that look worse than the old ones
  • Mould trapped under a layer of silicone
  • Caulk or the wrong sealant used in a wet area

Need remedial sealant in Slough Green?

Remedial sealant in Slough Green

Removing failed sealant is the hardest part of the job. Every layer is cut out, the residue cleaned off and the joint degreased, without scratching tiles, trays or frames. Only then can new sealant bond. Common call-outs are for decorators’ caulk around a bath or shower and repeat leaks from the same joint, across failed movement joints, leaking tray & enclosure joints and expansion joints.

In a village or hamlet like Slough Green, homes are often older cottages and farmhouses alongside a few newer houses. Movement in older walls and floors tends to show first as cracked grout or split sealant.

All our work is covered by a one-year guarantee.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Place
Slough Green (RH17)
Region
West Sussex
Guarantee
One year on every job
Quotes
A clear quote up front
Call
0345 464 0079
Page updated
26 October 2026

What happens if it’s left?

Remedial work takes longer than a straight reseal, but rarely a lot: it takes a few hours, depending on how many layers have to come out. Compared with chasing the same leak every few months, it’s time well spent. Around Slough Green, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.

Why book with us

  • We leave the area clean and tidy
  • Colour picked to suit the job
  • Anti-fungal sanitary silicone in wet areas
  • White, clear, grey or coloured to suit, where the product allows

See how sealant jobs are priced and what customers say.

Can I do it myself?

A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Always have old sealant cut out, not covered
  • Never fill a movement joint with mortar or grout
  • Keep bleach and abrasives off the bead
  • Find out why the sealant failed first

Keep the room ventilated: use the extractor or open a window after showering.

Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.

How the visit works

We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours for most joints, depending on how much old sealant has to come out, and the area is left clean. Somewhere like Slough Green needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. The joint is degreased and checked for movement and leaks.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

How to prepare

  • Mention if the joints have been sealed before
  • Let us know if you’ve seen damp or leaks
  • Tell us about access, such as stairs, a lift or high-level joints

How to get a quote

For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.

Ask for a quote

Advice

Remedial sealant around Slough Green

Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.

Managing a site like Warden Park School? Then we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Balcombe station, a joint that keeps failing is best fixed properly while the property is empty.

Slough Green is about 3 miles north-west of Haywards Heath, in West Sussex. Across the RH17 area, we can carry out remedial sealant at your property. Slough Green is one of 371 towns and villages in West Sussex we cover. Crawley is on our list too, about 6 miles from Slough Green.

Postcode districts we cover here for remedial sealant: RH17. We also cover Whitemans Green (1 mile east), Warninglid (1 mile west), Staplefield (1 mile north), Brook Street (1 mile east) and Cuckfield (1 mile south-east). Further out, we also cover Crawley (6 miles north), Horsham (7 miles north-west), Haywards Heath (3 miles south-east), Burgess Hill (5 miles south), East Grinstead (10 miles north-east) and Shoreham-by-Sea (13 miles south).

Landmarks near Slough Green

Slough Green’s nearest station is Balcombe station, roughly 2.9 miles north-east of the centre. A little further out are Cuckfield Museum (1.4 miles south-east) and The Dene Hospital (3.7 miles south). The countryside around Slough Green includes Blunts Wood and Paiges Meadow.

Map of Slough Green © OpenStreetMap contributors

What we cannot put right

A few problems are outside what sealant work can do:

  • Older mastics that may need an asbestos check before removal
  • Leaks from a shower valve, waste or pipework (a plumber’s job)
  • Movement from fittings that aren’t supported

If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.

What we seal

  • Botched or over-sealed joints
  • Shrunken worktop sealant
  • Failed movement joints
  • Leaking tray & enclosure joints
  • Expansion joints
  • Mouldy bath & shower sealant

Questions from Slough Green

Do you cover smaller places like Slough Green?

Yes. Slough Green is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you help a landlord with a rental near Balcombe station?

Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.

Are you an approved applicator?

Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.

Can you do several jobs on one visit?

Yes, we can. Several rooms, windows or areas can go on one quote.

Do you remove the old sealant?

Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.

Where do you work from?

Mr Mastic is based in Crawley. Our applicators cover Slough Green.

Can I do it myself?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Do you offer different sealant colours?

We will suggest a colour to suit the surroundings. The choice depends on the product the joint needs.

How we quote for remedial sealant

There’s no set price list, because jobs vary so much. The quote depends on:

  • Whether there’s mould to deal with
  • Working hours on commercial sites
  • How much old sealant there is and how hard it is to remove
  • How much there is to do

The cost reflects the work involved, not guesswork. That is why we ask about the job first.

What to tell us for a quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • Any previous sealing or DIY work
  • A few photos by email, if you can
  • Whether it’s a home or a business
  • What the problem is, such as mould, gaps, leaks or cracking

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.

Different surfaces, different methods

Over-sealed & botched joints

Every layer has to come out, including the smears and film on surrounding tiles. New sealant needs a fully clean surface.

Movement & expansion joints

Movement joints in floors, walls and façades need a flexible sealant set to the right depth. Failed sealant is cut out, backing rod or tape is fitted and the joint resealed.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job