East Sussex · England
Remedial sealant & repairs in Mount Pleasant, East Sussex
Problem with your failed sealant joints in Mount Pleasant? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Beads that never stuck properly
- A second bead peeling off the first
- Leaks that keep coming back after resealing
How we handle remedial sealant in Mount Pleasant
Remedial jobs in Mount Pleasant normally fall into a few patterns: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. Each is stripped back and done again properly. We work on mouldy bath & shower sealant, leaking tray & enclosure joints and expansion joints, and people most often call us about sealant applied over old sealant that has lifted and wide, uneven beads that look worse than the old ones.
For a small place like Mount Pleasant, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
All of our work is guaranteed for twelve months.
- Place
- Mount Pleasant (BN8)
- Wider area
- East Sussex
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How the job changes by surface
Worktops & kitchens
Kitchen joints hold grease and residue, so cleaning takes longer than in a bathroom.
Windows & doors
Frames resealed over the top end up with hard, layered mastic. We remove it all and clean back to sound surfaces.
Towns and villages near Mount Pleasant
Also in Mount Pleasant
Do you need remedial sealant in Mount Pleasant?
Sealant needs a clean, dry surface with no grease on it. Soap film, dust, damp or old residue stop it gripping, so it starts lifting sooner than it should.
The most common problems we see are:
- Sealant applied over old sealant that has lifted
- Mould trapped under a layer of silicone
- Beads that never stuck properly
- Torn expansion joints
In the older streets around St Bartholomews, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- What guarantee comes with the work
- What the cure time is
- What preparation is included
- Whether they seal over old material or remove it
When it is not the sealant
We will not take on work that won’t last, so here’s what sealant can’t put right:
- A cracked shower tray or bath (that needs repair or replacing)
- Failed tanking or loose tiles behind the sealant
- A tray or worktop that needs refixing first
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
What we seal
- Mouldy bath & shower sealant
- Failed movement joints
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Expansion joints
What happens if it’s left?
A failed seal rarely means a new bathroom. If the bath, tray and tiles are sound, remedial resealing usually puts it right. Where something else has failed, you’ll hear it from us. Where a wall is exposed, as many are in small places like Mount Pleasant, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and agree the price before starting.
Why book with us
- Anti-fungal silicone where joints get wet
- A choice of colours where the product allows
- Over 20 years’ experience
- Every job guaranteed for a year
See our cost guide and what customers say.
How the visit works
There is not much for you to do on the day. Point us to the joints and we will get on with it. The job generally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere like Mount Pleasant needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at how the sealant has failed and check for movement or a leak path.
- All the old sealant comes out, including any layers underneath.
- We clean the joint, treat any mould and let it dry.
- Moving joints get backing and a flexible sealant to suit.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- Mention any leaks or damp you’ve noticed
- Clear the area around the work
- Tell us about any previous sealing or DIY attempts
How to get a quote
For remedial sealant in Mount Pleasant, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
Related advice
Common questions in Mount Pleasant
Is Mount Pleasant in your area for remedial sealant?
Yes. We work across London and the South East, and Mount Pleasant is part of that. You can call 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear quote.
I let a flat near Cooksbridge station. Can you help?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear quote.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before work begins.
What does remedial sealant cost?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before we start.
What happens if the problem is the tray or the plumbing?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.
Can old silicone be taken off without scratching the tiles?
Yes. Residue is removed with a product suited to the surface rather than scraped hard.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
Remedial sealant in Mount Pleasant: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Cooksbridge station? Then botched sealant from a previous quick fix is easier to strip out between tenants. Managing a site like Barcombe Church of England Primary School? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Mount Pleasant is about 4 miles north of Lewes, in East Sussex. We provide remedial sealant to homes and businesses in Mount Pleasant and nearby, as part of our work across East Sussex. 289 places in East Sussex are on our list, large and small. You can also see our page for Brighton, about 10 miles away.
Work in BN8 is quoted and booked the same way as anywhere else. Neighbouring places we cover for remedial sealant include Barcombe Cross (1 mile south-west), Barcombe Mills (1 mile south), Barcombe (1 mile south), Isfield (2 miles east) and Upper Wellingham (2 miles south). Further out, we also cover Eastbourne (15 miles south-east), Seaford (11 miles south), Lewes (4 miles south), Hailsham (11 miles south-east), Crowborough (10 miles north-east) and Uckfield (4 miles north-east).
Near you in Mount Pleasant
We work in homes and buildings around Royal Oak pub and Chailey School, among other places. Mount Pleasant’s nearest station is Cooksbridge station, about 2.5 miles south-west of the centre. Other landmarks nearby include Museum of Agricultural Bygones (3.9 miles south-east) and Uckfield Community Hospital (4.2 miles north-east). Open spaces near Mount Pleasant include Offham Hill and Malling Down.
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Act on a lifting corner right away
- Run the fan after every shower
- Don’t point over movement joints
- Look for stains below bathrooms now and then
Leave the new joint to cure fully before it gets wet or moves: normally around 24 hours, or as long as we advise.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. Resealing while the edges are sound is simpler.