Hampshire · England
Remedial sealant & repairs in Lee, Hampshire
We cover Lee for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly.
- Caulk or the wrong sealant used in a wet area
- Leaks that keep coming back after resealing
- Gaps opening along the back of the worktop
Common questions in Lee
Will you come out to Lee?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Romsey station. Can you help?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do the sealants smell?
Some sealants have a smell while they cure, but it fades. Opening a window helps.
How do I get a quote for remedial sealant in Lee?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Are you fully insured?
Yes. We are fully insured for every job we do.
Where are you based?
Our base is Crawley. We work across South East England, London and Scotland.
Which products do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status, and we’re fully insured.
Remedial sealant for homes and businesses in Lee
Two decades of sealant work means we recognise most failures quickly. We’re fully insured ARBOMaster approved applicators, and remedial work carries our one-year guarantee. We work on failed movement joints, botched or over-sealed joints and shrunken worktop sealant, and common reasons people get in touch are caulk or the wrong sealant used in a wet area and sealant that came away because the surface wasn’t prepared.
Somewhere as small as Lee, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
Every job is covered by our one-year guarantee.
- Place
- Lee (SO51)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
More services for Lee
Lee homes and their sealant
Lee is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Schools such as Oasis Academy Lord's Hill are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you live in an older home near Church of St Boniface, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Lee is about 2 miles south of Romsey, in Hampshire. Homes, rented property, offices and hotels in Lee can book us for remedial sealant. Every job comes with our one-year guarantee. Lee is one of 683 towns and villages in Hampshire where we work for remedial sealant.
Here we cover the SO51 postcode area for remedial sealant. You’ll find streets such as Lee Lane and Lee Church Lane. Nearby, we also carry out remedial sealant in Ashfield (1 mile east), Toothill (1 mile east), Upton (1 mile south-east), Nursling (1 mile south-east) and Rownhams (2 miles south-east). Larger places within reach include Winchester (10 miles north-east), Eastleigh (6 miles east), Fareham (15 miles south-east), Totton (3 miles south), Chandler's Ford (5 miles north-east) and Hedge End (9 miles east).
Near you in Lee
For rail, the closest station is Romsey station, about 2.4 miles north. A little further out are King Johns House (2.3 miles north) and Romsey Community Hospital (2.3 miles north). The countryside around Lee includes Testwood Lakes.
How the visit works
Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. After that, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Somewhere as small as Lee, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Before we arrive
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
- Mention if the joints have been sealed before
How to get a quote
Every job is quoted individually, so the first step is telling us about yours. Just ring 0345 464 0079 or email us with the details, and photos are welcome.
Read more
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
How to look after the new joints
After the cure time, these simple habits help:
- Keep an eye on the ceiling below the bathroom
- Act on a lifting corner straight away
- Have loose fittings fixed before resealing
- Keep movement joints clear of mortar and paint
Leave the new joint to cure fully before it gets wet or moves: normally around 24 hours, or as long as we advise.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
What the job involves on each surface
Over-sealed & botched joints
Previous removal attempts can leave scratches or gouges. We take care not to make it worse, and tell you about any damage we find.
Movement & expansion joints
A sealant stuck to the back of the joint can’t stretch. Backing stops that, so the sealant grips the two sides only.
Honest limits
It helps to know what we cannot do too:
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Tiles that have come away from the wall
- A tray or worktop that needs refixing first
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Surfaces we seal
- Failed movement joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
- Expansion joints
Landlords, agents and businesses in Lee
We also work for property managers and facilities teams. Several sites can be quoted together, and we’re fully insured.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance that we can handle for you.
When to call us in Lee
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, so the silicone goes mouldy or lets go.
Any of these means the joints need attention:
- Gaps opening along the back of the worktop
- Torn expansion joints
- Over-sealed joints coming away
- Smears and lumps from a botched reseal
Letting a property close to Romsey station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
What your quote should include
- How the joint is cleaned and prepared
- What guarantee comes with the work
- How the colour is chosen
- What product goes in the joint