East Sussex · England
Remedial sealant & repairs in Hamsey, East Sussex
Remedial sealant for Hamsey and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Beads that never stuck properly
- Movement joints that have split or pulled away
- A shower that leaks however often it’s resealed
How we handle remedial sealant in Hamsey
Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all need stripping out. We work on mouldy bath & shower sealant, failed movement joints and leaking tray & enclosure joints, and common reasons people get in touch are repeat leaks from the same joint and thick, messy sealant smeared over tiles.
Being in a small place like Hamsey makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
The work is covered for a year after we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.
- Place
- Hamsey (BN8)
- Wider area
- East Sussex
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Have loose fittings fixed before resealing
- Never fill a movement joint with mortar or grout
- Deal with small splits early
- Air the bathroom so the sealant can dry
Do not let anyone seal over it later. New silicone does not bond to old.
Movement joints that have split let water into the structure, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
Remedial sealant around Hamsey
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Hamsey Community Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you live in an older home near The Parish Church of St Peter, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Hamsey is about 1 mile north of Lewes, in East Sussex. We carry out remedial sealant for homeowners, landlords and businesses in Hamsey. Our East Sussex coverage runs to 289 places, and Hamsey is one of them. You can also see our page for Brighton, roughly 7 miles from Hamsey.
We cover every part of the BN8 postcode area for remedial sealant and the streets around it. Neighbouring places we cover for remedial sealant include Offham (1 mile south-west), South Malling (1 mile south), Lewes (1 mile south), Cliffe (2 miles south) and Southover (2 miles south). We also work in nearby towns such as Eastbourne (14 miles south-east), Seaford (9 miles south-east), Hailsham (11 miles east), Crowborough (13 miles north-east), Uckfield (7 miles north-east) and Newhaven (7 miles south).
Near you in Hamsey
Typical jobs here are in homes near Railway Land, Priory School and The Blacksmiths Arms. The closest station to Hamsey is Cooksbridge station, roughly 0.8 miles north-west of the centre. Nearby you will also find Lewes Castle (1.6 miles south) and Lewes Victoria Hospital (1.5 miles south). Open spaces near Hamsey include Malling Down and Offham Hill.
For landlords and businesses
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
Questions from Hamsey
Can you do remedial sealant in Hamsey?
Yes. Our work covers London and the South East, and Hamsey is part of that. You can phone 0345 464 0079 or email us and tell us what needs doing.
Will you come out to Hamsey?
Yes. Hamsey is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties at once.
Do you fix expansion and movement joints?
Yes. Backing sets the depth and stops the sealant sticking to the back.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you quote for more than one area?
Yes. Several rooms, windows or areas can go on one quote.
What we do, step by step
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for most joints, depending on how much old sealant has to come out, depending on the size of the job. For a village or hamlet like Hamsey, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we find out how and where the joint has failed.
- All the old sealant comes out, including any layers underneath.
- Next, any mould is treated and the joint dried.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Keep children and pets away from the work area
- Move anything stored near the joints
How to get a quote
Every job is quoted individually, so the first step is telling us about yours. Simply phone 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
Advice
Other services in Hamsey
What we can’t put right
Before you book, it’s worth knowing the limits too:
- Tiles that have come away from the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Cracks in the fitting rather than the joint
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.
What we seal
- Failed movement joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Expansion joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
What happens if it’s left?
Remedial work takes longer than a straight reseal, but not by much: it takes a few hours for most joints, depending on how much old sealant has to come out. Compared with chasing the same leak every few months, it’s time well spent. In a small place like Hamsey, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will go through it with you.
What you get with us
- Colour agreed with you before work begins
- 20+ years of sealant experience
- An ARBOMaster approved applicator
- Homes, businesses and hotels
Take a look at how sealant jobs are priced or what customers say.
Signs you need remedial sealant in Hamsey
Some joints fail because water is reaching them from behind. A slow leak behind the tiles soaks the joint from the back, and the sealant lifts or goes mouldy from underneath.
Most people get in touch when they notice one of these:
- Beads that never stuck properly
- Leaks that keep coming back after resealing
- Gaps opening along the back of the worktop
- Floor or wall movement joints that have failed
If you let a flat or house near Cooksbridge station, a joint that keeps failing is best fixed properly while the property is empty.
What your quote should include
- The length of the guarantee
- Who turns up on the day
- What preparation is included
- What happens if they find a problem under the old sealant
Can I do it myself?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
If you’ve already had a go yourself, that is fine. We cut it out and start again.