Essex · England

Remedial Sealant in Great Canney

Problem with your failed sealant joints in Great Canney? We remove the old material, prepare the joints and seal them properly.

  • Over-sealed joints coming away
  • Movement joints that have split or pulled away
  • Dark patches showing through the sealant

Remedial sealant in Great Canney

Remedial sealant for homes and businesses in Great Canney

A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, then a flexible sealant matched to the movement goes in. We are often asked to deal with beads that never stuck properly and movement joints that have split or pulled away, on shrunken worktop sealant, failed movement joints and expansion joints.

Homes around Great Canney are mostly houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.

You’re covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or send us an email.

Location
Great Canney (CM3)
Region
Essex
Cover
One year on every job
Quotes
A clear quote up front
Telephone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

What remedial sealant looks like in Great Canney

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.

In the older streets around Parish Church of St Mary, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near North Fambridge station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.

Great Canney is about 4 miles south of Maldon, in Essex. Homes, rented property, offices and hotels in Great Canney is covered for remedial sealant, old or new, large or small. Every job comes with our 12-month guarantee. Great Canney is one of 644 towns and villages in Essex where we work. Our Chelmsford page covers work nearby.

Here we cover the CM3 postcode area for remedial sealant. Other places close to Great Canney include Farther Howegreen (1 mile north-east), Cold Norton (1 mile east), Stow Maries (1 mile south), Howegreen (1 mile north) and Purleigh (1 mile north). Further out, we also cover Chelmsford (9 miles north-west), Basildon (11 miles south-west), Braintree (15 miles north), Brentwood (15 miles west), Maldon (4 miles north) and Canvey Island (11 miles south).

What’s near Great Canney

Typical jobs here are in homes near William de Ferrers School and The Prince Of Wales Public House. For rail, the closest station is North Fambridge station, roughly 2 miles south-east of the centre. For a walk, there’s Stow Maries Halt.

Map of Great Canney © OpenStreetMap contributors

When something else is needed

Some problems need a builder, plumber or other trade rather than us:

  • A tray or worktop that needs refixing first
  • Older mastics that may need an asbestos check before removal
  • Tiles that have come away from the wall

Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly.

Joints and surfaces we work on

  • Mouldy bath & shower sealant
  • Expansion joints
  • Failed movement joints
  • Leaking tray & enclosure joints
  • Shrunken worktop sealant
  • Botched or over-sealed joints

Great Canney: your questions answered

Do you work for landlords with property near North Fambridge station?

Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.

Do you cover smaller places like Great Canney?

Yes. Great Canney is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Does someone need to be in?

For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.

My shower still leaks after a reseal. Can you sort it?

Yes. All the sealant comes out, we find out why it failed, and the joint is resealed properly.

Will there be a smell?

It depends on the product. Some smell for a while, some hardly at all.

Do you work for hotels and businesses?

Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.

What should I tell you?

The location, the problem and the rough size of the job. If you can, email a few photos.

Do you fix expansion and movement joints?

Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.

How the visit works

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many layers have to come out, and the area is left clean. Somewhere like Great Canney needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we work out whether the problem is the sealant, movement or a leak.
  2. Old beads and residue are removed down to clean surfaces.
  3. We treat any mould and dry the joint thoroughly.
  4. The right product goes in, with backing where the joint moves.
  5. We finish neatly and point out anything that needs another trade.

Preparing for the visit

  • Where the joints are inside, avoid wetting them before we arrive
  • For business premises, tell us about site rules or sign-in
  • Let us know about stairs, lifts or work at height

Getting a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear price.

Get a price

Read more

DIY versus a professional finish

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Different surfaces, different methods

Over-sealed & botched joints

Thick, smeared sealant looks messy and hides problems. Taking it back shows what’s underneath, and then we reseal it neatly.

Movement & expansion joints

Some movement joints have been filled with mortar or grout. We rake that out where it can be removed and seal with a flexible product.

Leave it or put it right?

Another bead over the top will not fix a failed joint. It cannot bond to what’s underneath, so the leak carries on and there’s now more to remove. In a small place like Great Canney, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.

Why us?

  • Tidy, careful work
  • One-year guarantee on every job
  • Sanitary silicone with an anti-fungal additive in wet areas
  • We’re fully insured

Take a look at what affects the cost or our reviews.

How we quote for remedial sealant

For a quick quote, just ask. What matters most is:

  • How easy the joints are to reach
  • How many rooms, windows or areas are involved
  • Working hours on commercial sites
  • Any mould that needs treating

We do not show prices on the website, because each job is priced on what it involves. Call for a quick quote.

Asking for a quote

Photos help, but a description is a good start. Please mention:

  • Pictures of the joints, sent by email
  • How we’d reach the joints
  • Roughly how big the job is
  • The address or postcode of the job

Need a quote? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.

Do you need remedial sealant in Great Canney?

Sealant needs a clean, dry surface with no grease on it. Residue, moisture or dust left in the joint weaken the bond, so it starts lifting sooner than it should.

Keep an eye out for any of the following:

  • Mould trapped under a layer of silicone
  • Wide, uneven beads that look worse than the old ones
  • Gaps opening along the back of the worktop
  • Movement joints that have split or pulled away

Schools such as Cold Norton Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

What to look for in a quote

  • How hidden problems are handled
  • Is VAT in the price?
  • Which sealant they’ll use, and why
  • How the colour is chosen

10 questions to ask before booking

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job