East Sussex · England
Remedial Sealant in Furner's Green
Remedial sealant across Furner's Green and nearby, with every bit of old sealant taken out first.
- Mould trapped under a layer of silicone
- Movement joints that have split or pulled away
- Kitchen joints letting water behind the worktop
Keeping the joints in good condition
Aftercare is simple, and it makes a real difference:
- Do not point over movement joints
- Keep the room well ventilated
- Keep bleach and abrasives off the bead
- Deal with small splits early
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
Remedial sealant in Furner's Green
Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. We work on leaking tray & enclosure joints, mouldy bath & shower sealant and failed movement joints, and common reasons people get in touch are over-sealed joints coming away and sealant that came away because the surface wasn’t prepared.
Being in a small place like Furner's Green makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.
- Where
- Furner's Green (TN22)
- Wider area
- East Sussex
- Cover
- A year, on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Furner's Green
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What we’re called out for in Furner's Green
All sealant wears out eventually. Mould grows into the silicone, the surface hardens and the bead shrinks, faster where ventilation is poor. At that point it has to come out.
Keep an eye out for these signs:
- Torn expansion joints
- Sealant applied over old sealant that has lifted
- Leaks that keep coming back after resealing
- Wide, uneven beads that look worse than the old ones
Schools such as Danehill Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Before you book anyone
- How the surfaces are prepared before sealing
- Are they insured?
- How the colour is chosen
- Is the old sealant removed completely?
Quotes for remedial sealant in Furner's Green
Jobs vary more than people expect. What affects the quote:
- How many areas need sealing
- The number and length of the joints
- Whether the work is at height
- When we can work, for business premises
The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
What we need to know
There’s no need for technical detail. It helps if you can tell us:
- Any previous sealing or DIY work
- The address or postcode of the job
- Whether it’s a home or a business
- Access, such as stairs, a lift or height
Getting a quote is simple: tell us what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
What happens on the day
On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes a few hours for a typical bath or shower, longer where several layers have been applied from start to finish. Somewhere as small as Furner's Green, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
- Mention if the joints have been sealed before
Ask for a quote
We do not publish a price list. Instead, we send you a clear quote for your job. To arrange one, phone 0345 464 0079 or drop us an email.
Advice
How the job changes by surface
Mouldy bath & shower sealant
Black mould inside the bead will not scrub out. The sealant is cut out completely, the joint treated with a mould remover and dried ahead of a new anti-fungal bead.
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. Taking it back shows what’s underneath, and then we reseal it neatly.
Bathrooms and kitchens in Furner's Green
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around The Parish Church of All Saints, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Haywards Heath station, a joint that keeps failing is best fixed properly while the property is empty.
Furner's Green is about 5 miles east of Haywards Heath, in East Sussex. Furner's Green gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. We cover 289 towns and villages across East Sussex. Crawley is on our list too, around 11 miles away.
Here we cover the TN22 postcode area for remedial sealant. Whether your property is on Tanyard Lane and Slider's Lane or anywhere close by, our applicators can take on the job. We also cover the places around Furner's Green: Danehill (1 mile north), Chelwood Common (2 miles north), Horsted Keynes (2 miles north-west), Chelwood Gate (2 miles north) and Nutley (2 miles north-east). We also work in nearby towns such as Lewes (10 miles south), Hailsham (15 miles south-east), Crowborough (7 miles east), Uckfield (5 miles south-east), Newhaven (15 miles south) and Peacehaven (15 miles south).
Around Furner's Green
Around Furner's Green, our work takes us to homes and buildings near Sheffield Park Garden. Furner's Green’s nearest station is Haywards Heath station, roughly 5 miles west of the centre. A little further out are Princess Royal Hospital (4.6 miles west) and Waterbury Castle (2.5 miles north-west). The countryside around Furner's Green includes Brickfield Meadow.
Places near Furner's Green
More services for Furner's Green
FAQs for Furner's Green
I let a flat near Haywards Heath station. Can you help?
Yes, we work for landlords and agents. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.
Do you cover smaller places like Furner's Green?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is remedial work guaranteed?
Yes, for 12 months. Where we have flagged another fault, it needs fixing for the joint to last.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Can old silicone be taken off without scratching the tiles?
Yes. We take our time over removal, particularly on softer surfaces like acrylic.
What if resealing won’t fix my leak?
Then we explain what we have found. You may need a plumber or bathroom fitter.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Do the sealants smell?
It depends on the product. Some smell for a while, some hardly at all.