Kent · England
Remedial Sealant in Frinsted
Our applicators work in Frinsted on removing failed, mouldy or leaking sealant and putting it right. Old material cut out, joints cleaned and sealed neatly.
- Movement joints that have split or pulled away
- Gaps opening along the back of the worktop
- Mould trapped under a layer of silicone
What remedial sealant looks like in Frinsted
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
For an older house near a landmark such as St Giles, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Schools such as Milstead and Frinsted Church of England Primary School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Frinsted is about 4 miles south of Sittingbourne, in Kent. From the centre of Frinsted to the outskirts, remedial sealant is available for homes and businesses alike. Across Kent, we cover 922 places, Frinsted among them. Chelmsford is on our list too, about 33 miles from Frinsted.
Here we cover the ME9 postcode area for remedial sealant. You will find streets such as The Street, Bottom Pond Road and Dray's Field, and we cover them all. We also cover Milstead (1 mile north-east), Hollybushes (2 miles east), Bluetown (2 miles east), Wichling (2 miles east) and West Street (2 miles south-east). Further out, we also cover Maidstone (8 miles west), Ashford (12 miles south-east), Sittingbourne (4 miles north), Whitstable (15 miles east), Faversham (8 miles east) and Minster (10 miles north-east).
Landmarks near Frinsted
Around Frinsted, our work takes us to homes and buildings near The Blacksmith's Arms Public House, among other places. The nearest railway station is Harrietsham station, roughly 3 miles south-west. Well-known places in the area include Leeds Castle (4 miles south-west) and Laundry Museum (3.8 miles south-west).
How we handle remedial sealant in Frinsted
Water on the floor does not always mean failed silicone. A cracked tray, a failed shower valve or a leaking waste can look just the same. If that’s what we find, we’ll tell you rather than reseal something that won’t fix it. We work on expansion joints, failed movement joints and leaking tray & enclosure joints, and common reasons people get in touch are torn expansion joints and sealant peeling off a dusty or damp surface.
Around Frinsted, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Location
- Frinsted (ME9)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
Good habits help new joints last longer. A few tips:
- Don’t wait for a small gap to become a leak
- Keep an eye on the ceiling below the bathroom
- Run the fan after every shower
- Never seal over old silicone
Keep an eye on the joint at first, particularly where the original failure was caused by movement. If anything changes, just phone 0345 464 0079 or drop us an email.
A split movement joint lets rain into walls and floors, and left long enough, the edges of the joint can crumble. A joint with sound edges is far easier to reseal.
What we do, step by step
On the day, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before work begins. Most jobs take a few hours, depending on how many layers have to come out. In a small place like Frinsted, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Getting ready for the visit
- Mention any tricky access
- Try not to wet indoor joints just before the visit
- Keep children and pets away from the work area
How to get a quote
If you are in Frinsted and need remedial sealant, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Read more
Other services in Frinsted
Different surfaces, different methods
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We work carefully to avoid adding to it, and tell you about any damage we find.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
When to call us in Frinsted
Using the wrong product is a common cause: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. Each fails in its own way.
These are the problems we are asked about most:
- Gaps opening along the back of the worktop
- Thick, messy sealant smeared over tiles
- Products that weren’t meant for the joint
- Repeat leaks from the same joint
Rented homes near Harrietsham station change hands often, and a joint that keeps failing is best fixed properly while the property is empty.
Before you book anyone
- How much experience the applicator has
- How hidden problems are handled
- Is VAT in the price?
- Whether you can choose the colour
Common questions in Frinsted
Is Frinsted within the area you cover?
Yes, Frinsted is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Harrietsham station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or email us and tell us about the property, and we will give you a clear price.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we are using and why.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Where are you based?
We work from Crawley. Our applicators cover Frinsted.
Can I choose the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Do you do commercial work?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
Do you guarantee remedial jobs?
Yes. Remedial work carries the same 12-month guarantee as all our work.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Why deal with it now?
Spraying mould remover on a sealed-over joint doesn’t reach what’s underneath. Removal is the only way to get at it, so the joint can be treated and resealed. In a small place like Frinsted, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost reflects the work involved, not guesswork. That is why we ask about the job first and send you a clear quote before we start.
What you get with us
- An ARBOMaster approved applicator
- Sealant colour chosen to suit
- Rated 4.9 stars on Google
- More than 20 years in sealant work
Take a look at our cost guide or our reviews.
What affects the cost of remedial sealant
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- How easy the joints are to reach
- Any mould that needs treating
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- Roughly how big the job is
- Whether it’s a home or a business
Every job is quoted individually, so start by telling us what you need. Simply ring 0345 464 0079 or drop us an email and describe the job.