South Lanarkshire · Scotland

Remedial sealant & repairs in Fernhill, South Lanarkshire

Failed sealant joints in Fernhill need attention? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.

  • Wide, uneven beads that look worse than the old ones
  • Sealant that came away because the surface wasn’t prepared
  • Mould trapped under a layer of silicone

Book remedial sealant in Fernhill

Can I do it myself?

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

How we handle remedial sealant in Fernhill

Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all have to come out. If you have repeat leaks from the same joint and beads that never stuck properly, we can help, on expansion joints, failed movement joints and shrunken worktop sealant alike.

A bathroom in a place like Fernhill gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.

We guarantee the work for a year. If something is not right with it in that time, tell us and we’ll put it right.

Place
Fernhill (G73)
Region
South Lanarkshire
Cover
One year on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Page updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

What we do, step by step

The work is kept neat and contained to the area we’re working on, so you can get on with your day. The job generally takes a few hours for most joints, depending on how much old sealant has to come out, and we tell you how long to leave it before we go. In smaller Scottish places, parking is normally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.

  1. Surrounding tiles, trays and frames are protected first.
  2. Every layer of failed sealant is stripped out.
  3. The joint is degreased and checked for movement and leaks.
  4. New sealant goes in once the joint is dry, and is tooled smooth.
  5. We give you the cure time and explain what caused the failure.

How to prepare

  • Try not to wet indoor joints just before the visit
  • Mention if the joints have been sealed before
  • Clear items away from the joints we are working on

How to get a quote

We do not publish a price list. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.

Get a price

Read more

What happens if it’s left?

It’s easy to scratch acrylic, enamel or an uPVC frame cutting out old sealant, and the residue left behind stops the next bead bonding. Careful removal is most of a remedial job. Around Fernhill, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.

Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.

Why us?

  • Experience in homes, commercial sites and hotels
  • You choose the colour before work begins
  • Approved under the ARBOMaster scheme
  • Fully insured

Read how sealant jobs are priced or customer reviews.

Fernhill: your questions answered

Can you do remedial sealant in Fernhill?

Yes, Fernhill is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we will give you a clear price.

I let a flat near Burnside station. Can you help?

Yes, we work for landlords and letting agents. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we’ll send you a clear quote.

Can you match the sealant colour?

Normally, yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before work begins.

Can failed expansion joints be resealed?

Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.

What should I tell you?

Only a few details: the address or postcode, what’s wrong and any access issues. After that, simply email us at info@mrmastic.co.uk.

Will it make a mess?

Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.

Someone sealed over the old bead. Can you fix it?

Yes. Stripping layered sealant takes longer than a normal reseal, but it’s the only way the new joint will last.

Does someone need to be in?

That depends on where the joints are. Inside work needs someone to give us access.

Quotes for remedial sealant in Fernhill

Your quote is based on your job. We look at:

  • Working hours on commercial sites
  • How many rooms, windows or areas are involved
  • Whether the work is at height
  • The number and length of the joints

A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Asking for a quote

The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:

  • Access, such as stairs, a lift or height
  • What’s wrong with the joints now
  • The type of property
  • Where the property is

For a quote, drop us a line at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.

Work for landlords, hotels and businesses

We also work for property managers and facilities teams in Fernhill and across South Lanarkshire. We can quote a run of properties together, and we are fully insured for the work.

If you manage several properties in or around Fernhill, several properties can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.

Aftercare tips

Simple care keeps the joints in good condition. Our advice:

  • Run the fan after every shower
  • Do not wait for a small gap to become a leak
  • Check ceilings under showers for marks
  • Get the cause of a repeat leak found before resealing

Keep an eye on the joint at first, especially if movement was the problem. Should anything change, send an email to info@mrmastic.co.uk.

Don’t keep resealing the same joint. Have someone find out why, otherwise the next attempt will fail too.

Fernhill homes and their sealant

In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.

For site and facilities teams at buildings such as Fernhill School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Burnside station, a joint that keeps failing is best fixed properly while the property is empty. Homes close to Stonelaw Parish Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.

Fernhill is about 2 miles west of Cambuslang, in South Lanarkshire. Every kind of property in Fernhill can book us for remedial sealant. The work is guaranteed for a year. 139 places in South Lanarkshire are on our list, from the larger towns to small villages.

We work across the G73 postcode area for remedial sealant. You’ll find streets such as Fernhill Road, Auchenlarie Drive and Kippford Terrace. Other places close to Fernhill include Spittal (1 mile north-west), Rutherglen (1 mile north), Croftfoot (1 mile west), Castlemilk (1 mile west) and Polmadie (1 mile north-west). Within a short drive, we also cover East Kilbride (3 miles south), Hamilton (6 miles south-east), Uddingston (5 miles east), Blantyre (4 miles east), Larkhall (10 miles south-east) and Carluke (15 miles east).

What’s near Fernhill

We work in homes and buildings around Cambuslang Park and the streets around them. Fernhill’s nearest station is Burnside station, about 0.6 miles north. Well-known places in the area include Kingsgate Retail Park (2.2 miles south-east) and Rutherglen Castle (1.5 miles north). The countryside around Fernhill includes Cathkin Braes.

Map of Fernhill © OpenStreetMap contributors

When it is not the sealant

Sealant isn’t the answer to every problem, and we’d rather say so up front. Sealant won’t put right:

  • Plumbing leaks behind walls or under trays
  • Sealant in an older building that needs testing for asbestos first
  • Water damage behind tiles that needs a tiler

If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.

Where we work in Fernhill

  • Mouldy bath & shower sealant
  • Expansion joints
  • Shrunken worktop sealant
  • Leaking tray & enclosure joints
  • Failed movement joints
  • Botched or over-sealed joints
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job