Hampshire · England

Fareham Common Remedial Sealant

Failed sealant joints in Fareham Common need attention? We cut out the old, prepare the joints and apply the right sealant.

  • Wide, uneven beads that look worse than the old ones
  • Dark patches showing through the sealant
  • Repeat leaks from the same joint

Remedial sealant in Fareham Common

About our remedial sealant in Fareham Common

Getting old sealant out properly is slow, careful work. We cut out every layer, clear the residue and degrease the surfaces, without scratching tiles, trays or frames. Only then can new sealant bond. We work on expansion joints, shrunken worktop sealant and mouldy bath & shower sealant, and the jobs we see most are mould trapped under a layer of silicone and decorators’ caulk around a bath or shower.

In a smaller place like Fareham Common, homes are mostly houses and bungalows rather than flats, from older cottages to newer builds. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.

Your job is guaranteed for a year, as with all our work.

Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles
Place
Fareham Common (PO16, PO14)
Wider area
Hampshire
Cover
A year, on every job
Quote
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026

What we can’t put right

A few problems are outside what sealant work can do:

  • Tiles that have come away from the wall
  • Movement from fittings that aren’t supported
  • Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed

Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly.

What we seal

  • Mouldy bath & shower sealant
  • Failed movement joints
  • Shrunken worktop sealant
  • Leaking tray & enclosure joints
  • Botched or over-sealed joints
  • Expansion joints

Remedial sealant in Fareham Common: local notes

Fareham Common is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.

Rented homes near Fareham station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. Homes close to Parish Church of St Peter and St Paul include some older properties, and bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.

Fareham Common is about 1 mile east of Fareham, in Hampshire. For remedial sealant in and around Fareham Common, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover Hampshire. Our area takes in 683 places across Hampshire, large and small.

All of PO16 and PO14 is within our area for remedial sealant, from the main roads to the quietest streets. Streets in the area include Bath Lane, Osborn Road and High Street, all of which we cover. Fareham Common sits on or near the A32. Other places close to Fareham Common include Wallington (1 mile north-east), Fareham (1 mile west), North Fareham (1 mile north), Boarhunt (2 miles north-east) and Crockerhill (2 miles north). Larger places within reach include Gosport (3 miles south), Havant (8 miles east), Eastleigh (11 miles north-west), Horndean (8 miles north-east), Totton (15 miles west) and Chandler's Ford (13 miles north-west).

Local landmarks in Fareham Common

We work in homes and buildings around Harrison Primary School, The Red Lion Hotel and Cams Hill School, among other places. For rail, the closest station is Fareham station, roughly 0.8 miles west. A little further out are Portchester Castle (2.8 miles east) and Carron Row Farm Museum (2.6 miles west). The countryside around Fareham Common includes West of the River Alver and Portsdown Hill.

Map of Fareham Common © OpenStreetMap contributors

What affects the cost of remedial sealant

We quote each job individually. This is what makes a difference:

  • Any working-time requirements on site
  • How many rooms, windows or areas are involved
  • Any mould that needs treating
  • How much old sealant there is and how hard it is to remove

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

Asking for a quote

What to tell us when you ask for a quote:

  • How many joints, rooms or windows are involved
  • If someone has resealed it before
  • Access, such as stairs, a lift or height
  • A few pictures by email, if you can

There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, phone 0345 464 0079 or drop us an email.

The process

Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours, depending on how many layers have to come out. In a smaller place like Fareham Common, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.

  1. We start by checking the joint for movement, leaks and the reason it failed.
  2. We strip the joint completely, removing any layers below.
  3. The joint is cleaned, treated for mould and left to dry.
  4. Where the joint moves, backing and a flexible sealant suited to the movement go in.
  5. Finally we finish the joint and talk you through what we found.

Getting ready for the visit

  • Try not to wet indoor joints just before the visit
  • Tell us about any water getting in
  • Mention any tricky access

Get a quote

If you are in Fareham Common and need remedial sealant, phone 0345 464 0079 or email us. Tell us what the problem is and where, and you will get a clear quote before work begins.

Get a price

Advice

DIY sealant or a professional job?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.

What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.

Do you need remedial sealant in Fareham Common?

Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.

Any of these means the joints need attention:

  • Sealant applied over old sealant that has lifted
  • Worktop sealant that has shrunk and split
  • Thick, messy sealant smeared over tiles
  • Torn expansion joints

If you look after a building such as Wykeham House School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Comparing quotes

  • What happens if they find a problem under the old sealant
  • When the joint can take water or movement
  • Whether the sealant suits the joint
  • Whether all the old sealant comes out first

Our hiring checklist

Looking after it afterwards

Looking after new joints is easy, and it makes a real difference:

  • Check ceilings under showers for marks
  • Keep the room well ventilated
  • Have loose fittings fixed before resealing
  • Ask why a joint failed before redoing it

If the joint ever needs renewing, have it cut out, not sealed over. New silicone doesn’t bond to old.

Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.

Fareham Common questions

Do you cover Fareham Common for remedial sealant?

Yes, Fareham Common is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing.

Do you cover smaller places like Fareham Common?

Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

How long will it take to strip and reseal the joint?

Allow a few hours for most joints, depending on how much old sealant has to come out. You’ll know the timing when we quote.

Do you work for landlords and businesses?

Yes, often. Several properties can go on one quote, and between tenancies is a good time for the work.

Do the sealants smell?

That depends on the sealant. Some smell for a while, some hardly at all.

Will you leave a mess?

Very little: the area around the joints is protected first, and we tidy up before we go.

Can you match the sealant colour?

Yes. White, clear and grey are common, and other colours are available for many products, and we will agree it with you first.

What sealant do you use?

It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.

How the job changes by surface

Windows & doors

Smeared or badly matched mastic can be cut out and redone neatly, matched to the frame colour.

Worktops & kitchens

A loose worktop splits its sealant. That needs refixing before resealing, which we’ll point out.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job