Hampshire · England
Remedial sealant & repairs in Curbridge, Hampshire
Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Curbridge. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Leaks that keep coming back after resealing
- Worktop sealant that has shrunk and split
- Beads that never stuck properly
Remedial sealant in Curbridge
With more than 20 years’ experience, our applicators have seen most of the ways sealant can fail. We are ARBOMaster approved and fully insured, and remedial work carries our 12-month guarantee. We work on mouldy bath & shower sealant, shrunken worktop sealant and botched or over-sealed joints, and people most often call us about beads that never stuck properly and black mould underneath the bead.
In a smaller place like Curbridge, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Curbridge (SO30)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Quotes for remedial sealant in Curbridge
Your quote is based on your job. We look at:
- How many areas need sealing
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
- The product the joint needs
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
What we need to know
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- Any access issues, like height or stairs
- Where the property is
- If someone has resealed it before
- The type of property
We quote each job on its own, so the first step is telling us about yours. Just ring 0345 464 0079 or email us with the details, and pictures are welcome.
Towns and villages near Curbridge
More services for Curbridge
Different surfaces, different methods
Mouldy bath & shower sealant
Black mould inside the bead won’t scrub out. The sealant is cut out completely, the joint treated with a mould remover and dried before anti-fungal sanitary silicone goes in.
Worktops & kitchens
If a worktop moves when you lean on it, the sealant will keep splitting. It needs fixing down first, and we’ll tell you if we find it.
Curbridge homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Around Curbridge, as everywhere, remedial sealant is only as good as the preparation behind it.
Curbridge is about 3 miles east of Hedge End, in Hampshire. Jobs in Curbridge get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 683 places in Hampshire are on our list, large and small. There’s also a page for Southampton, about 7 miles away.
We cover every part of SO30 for remedial sealant. If you need remedial sealant at a property on Tanners Brook Close, Loddon Close and Oakhanger Close or a nearby road, we can help. Close by, we work in Curdridge (1 mile north), Botley (2 miles north-west), Boorley Green (3 miles north-west), Waltham Chase (3 miles north-east) and Durley (3 miles north). Larger places within reach include Winchester (11 miles north), Gosport (8 miles south-east), Havant (12 miles east), Eastleigh (6 miles north-west), Fareham (4 miles south-east) and Horndean (10 miles east).
Local landmarks in Curbridge
In Curbridge, that means homes and buildings near Horse and Jockey pub and the streets around them. Curbridge’s nearest station is Botley station, roughly 1.2 miles north-west of the centre. A little further out are St Andrew's Castle (4.6 miles south-west) and Knowle Hospital (2.3 miles south-east). Green spaces nearby include Swanwick Lakes.
Common problems we fix in Curbridge
How a joint is built matters as much as the product. Sealant packed too deep, or stuck to the back of the joint as well as the sides, can’t stretch, and tears at the first real movement. Backing rod or bond-breaker tape prevents it.
Signs it’s time to call us include:
- A second bead peeling off the first
- Products that weren’t meant for the joint
- Repeat leaks from the same joint
- Floor or wall movement joints that have failed
Rented homes near Botley station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Questions to ask before you book
- Is VAT in the price?
- Which colour the sealant will be
- Are they insured?
- What the cure time is
Why it’s worth doing now in Curbridge
Stripping out botched sealant adds time to a reseal, but rarely a lot: the work takes a few hours, depending on how many layers have to come out. It’s far less disruption than resealing the same joint again and again. Around Curbridge, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we’ll explain what it covers.
Why book with us
- Colour agreed with you before any work starts
- Homes, businesses and hotels
- Any old sealant cut out fully, not covered over
- A sealant colour to suit the surroundings
Read our cost guide or our reviews.
The process
There is not much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes a few hours, depending on how many layers have to come out, including the tidy-up. Parking around Curbridge is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We start by checking the joint for movement, leaks and the reason it failed.
- We strip the joint completely, removing any layers below.
- Next, any mould is treated and the joint dried.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- Mention if the joints have been sealed before
- Let us know about stairs, lifts or work at height
Ask for a quote
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Read more
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Questions from Curbridge
I let a flat near Botley station. Can you help?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Can you do remedial sealant in Curbridge?
Yes. We work across London and the South East, and Curbridge is part of that. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Do you work for hotels and businesses?
Yes. Hotels, offices and other businesses use us and we’re fully insured.
Do you guarantee remedial jobs?
Yes. You get our 12-month guarantee, and we’re fully insured.
When is the sealant fully cured?
Cure times vary by product and the temperature. We tell you how long to leave it before we go.
Can you match the sealant colour?
Normally, yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before we start.
Can failed expansion joints be resealed?
Yes. The depth is set with backing so the sealant only bonds to the two sides.
How to look after the new joints
After the cure time, these simple habits help:
- Keep the room well ventilated
- Clean sealant with mild products only
- Deal with small splits early
- Have loose fittings fixed before resealing
Don’t let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
Leaks through failed sealant grow over time. Every shower or downpour sends more water through, into floors, walls or ceilings. Early action keeps it to a sealant job.