Surrey · England
Remedial Sealant in Crosswater
Problem with your failed sealant joints in Crosswater? We cut out the old, prepare the joints and apply the right sealant.
- Movement joints that have split or pulled away
- Beads that never stuck properly
- Black mould underneath the bead
How we handle remedial sealant in Crosswater
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. If you are dealing with a second bead peeling off the first and mould trapped under a layer of silicone, we can help, on expansion joints, mouldy bath & shower sealant and leaking tray & enclosure joints alike.
For a small place like Crosswater, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or send us an email.
- Location
- Crosswater (GU10)
- Wider area
- Surrey
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Leave it or put it right?
Remedial work takes longer than a straight reseal, but rarely a lot: it takes a few hours for most joints, depending on how much old sealant has to come out. Compared with chasing the same leak every few months, it’s time well spent. Older cottages and farmhouses around Crosswater can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
Why Crosswater clients choose us
- Quality sealants from Arbo and Everbuild
- Full insurance on every job
- You choose the colour before work begins
- Colour picked to suit the job
Take a look at how sealant jobs are priced and customer reviews.
The process
At the end, we look at the finished work together. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied, depending on the amount of work. For a village or hamlet like Crosswater, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- We give you the cure time and explain what caused the failure.
How to prepare
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
- Mention if the joints have been sealed before
How to get a quote
Want a quote for remedial sealant? Please call 0345 464 0079 or drop us an email and tell us about the job. We’ll explain what we’d do and give you a clear quote before any work starts.
Advice
Questions from Crosswater
Do you cover smaller places like Crosswater?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Is Crosswater in your area for remedial sealant?
Yes. We work across London and the South East, and Crosswater is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Are you fully insured?
Yes. We are fully insured for every job we do.
Where are you based?
We are a Crawley-based firm. We work across South East England, London and Scotland.
Is there any odour?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in.
Do you fix expansion and movement joints?
Yes. We cut out the failed sealant, fit backing and reseal with a flexible product.
Crosswater homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
In the older streets around St John the Evangelist, walls and floors in older homes can move, and sealant and grout show it first. For landlords with property near Farnham station, botched sealant from a previous quick fix is easier to strip out between tenants.
Crosswater is about 4 miles south of Farnham, in Surrey. We provide remedial sealant to homeowners, landlords and businesses in Crosswater. Across Surrey, we cover 395 places, Crosswater among them. There’s also a page for Reading, about 22 miles away.
Here we cover the GU10 postcode area for remedial sealant. We also cover the places around Crosswater: Churt (1 mile south), Green Cross (1 mile south-east), Frensham (1 mile north-west), Barford (1 mile south) and Rushmoor (1 mile north-east). Larger places within reach include Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (13 miles north), Farnham (4 miles north), Frimley (12 miles north) and Haslemere (5 miles south-east).
What’s near Crosswater
Typical jobs here are in homes near Crossways Inn and The Flashes. Crosswater’s nearest station is Farnham station, roughly 4.3 miles north. Nearby you’ll also find Farnham Castle (4.9 miles north) and Chase Community Hospital (4.7 miles south-west). Not far away are Gibbet Hill and Upper Lake.
Aftercare tips
A little care helps the new joints last. Our advice:
- Never seal over old silicone
- Run the fan after every shower
- Keep movement joints clear of mortar and paint
- Use a soft cloth, not a scourer, on silicone
If we’ve found a cause, such as a loose tray or a leaking waste, get it fixed, because the new sealant can’t hold back a problem underneath.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
Landlords, agents and businesses in Crosswater
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- A leaking trap, valve or supply pipe
- A cracked shower tray or bath (that needs repair or replacing)
- A bath, tray or worktop that moves until it’s properly fixed
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Where we work in Crosswater
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
Should I try it myself first?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Also near Crosswater
More services for Crosswater
When to call us in Crosswater
Using the wrong product is a common cause: caulk where it gets wet, rigid sealant where things move, or an acetoxy silicone on a surface it can mark. Each fails in its own way.
Any of these means the joints need attention:
- Black mould underneath the bead
- Worktop sealant that has shrunk and split
- Smears and lumps from a botched reseal
- A second bead peeling off the first
For site and facilities teams at buildings such as St John's CofE Aided Infant School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Comparing quotes
- When the joint can take water or movement
- Whether VAT is included
- What insurance they hold
- How the colour is chosen