Hampshire · England
Remedial sealant & repairs in Brook, Hampshire
Removing failed, mouldy or leaking sealant and putting it right for Brook, backed by a 12-month guarantee. Call for a quick quote.
- A shower that leaks however often it’s resealed
- Black mould underneath the bead
- Thick, messy sealant smeared over tiles
Remedial sealant in Brook, done properly
Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. If you’re dealing with leaks that keep coming back after resealing and smears and lumps from a botched reseal, we can put it right, on botched or over-sealed joints, leaking tray & enclosure joints and shrunken worktop sealant alike.
Being in a small place like Brook makes no difference to the job itself: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
All our work comes with our 12-month guarantee, wherever you are in Hampshire.
- Where
- Brook (SO43)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What we are called out for in Brook
Joint depth matters. Sealant packed too deep, or stuck to the back of the joint as well as the sides, cannot stretch, and tears at the first real movement. Backing sets the depth and stops that.
Most people get in touch after spotting one of these:
- A second bead peeling off the first
- Sealant that came away because the surface wasn’t prepared
- Worktop sealant that has shrunk and split
- Dark patches showing through the sealant
If you let a flat or house near Ashurst New Forest station, botched sealant from a previous quick fix is easier to strip out between tenants.
What to look for in a quote
- Is VAT in the price?
- Whether they seal over old material or remove it
- Which sealant they’ll use, and why
- Whether they’re fully insured
Brook homes and their sealant
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Around Brook, as everywhere, remedial sealant is only as good as the preparation behind it.
Brook is about 4 miles west of Totton, in Hampshire. From the centre of Brook to the outskirts, remedial sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Brook is one of 683 towns and villages in Hampshire we cover for remedial sealant. Our Southampton page covers work nearby.
Jobs for remedial sealant in SO43 is quoted and booked the same way as anywhere else. We also cover the places around Brook: Wittensford (1 mile east), Cadnam (1 mile east), Minstead (2 miles south), Newbridge (2 miles north-east) and Bramshaw (2 miles north). We also work in nearby towns such as Eastleigh (12 miles east), Totton (4 miles east), Chandler's Ford (11 miles north-east), Hedge End (13 miles east), Lymington (12 miles south) and Romsey (7 miles north-east).
Around Brook
Around Brook, our work takes us to homes and buildings near Green Dragon Inn. The nearest railway station is Ashurst New Forest station, about 4.2 miles south-east of the centre. Well-known places in the area include Tatchbury Mount Hospital (3.5 miles east). For a walk, there’s Copythorne Common.
Landlord and commercial work in Brook
If you manage several properties in or around Brook, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will give you a quote.
Questions from Brook
Do you work for landlords with property near Ashurst New Forest station?
Yes, we work for landlords and agents. Just ring 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
Can you do remedial sealant in Brook?
Yes. Our work covers London and the South East, and Brook is part of that. You can phone 0345 464 0079 or send us an email and tell us what needs doing.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Where are you based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Do you offer different sealant colours?
Most of the time, yes. We’ll explain which colours are available.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we’ll tell you what we are using.
How long before the joint can be used?
Most sealants are touch-dry well before they’re fully cured. We will tell you how long to leave the joint before we leave.
How long does the work take?
The number of joints and layers decides it. We will tell you before we start.
What happens if it’s left?
Remedial work takes longer than a straight reseal, but rarely a lot: the work takes a few hours for a typical bath or shower, longer where several layers have been applied. Compared with chasing the same leak every few months, it’s time well spent. In a small place like Brook, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on the amount of work, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts.
Why book with us
- 20+ years of sealant experience
- Arbo and Everbuild products
- ARBOMaster approved applicator
- White, clear, grey or another colour, product permitting
Can I do it myself?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Other services in Brook
How the job changes by surface
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out so the new sealant starts clean.
Leaking trays & enclosures
Where the joints are the problem, every bead is stripped and resealed with anti-fungal sanitary silicone, tray edges and screen profiles included.
What happens on the day
When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before work begins. The work normally takes a few hours for a typical bath or shower, longer where several layers have been applied. For a village or hamlet like Brook, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the joint for movement, leaks and the reason it failed.
- Every layer of old sealant is cut and cleaned out.
- Next, any mould is treated and the joint dried.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- For business premises, tell us about site rules or sign-in
- Keep children and pets away from the work area
Get a quote
For remedial sealant in Brook, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Related advice
What we can’t put right
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- A leaking trap, valve or supply pipe
- A tray or worktop that needs refixing first
- A tray or bath that’s cracked
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before you book.
Where we work in Brook
- Botched or over-sealed joints
- Failed movement joints
- Leaking tray & enclosure joints
- Expansion joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant