Hampshire · England
Remedial sealant & repairs in Abbotswood, Hampshire
Removing failed, mouldy or leaking sealant and putting it right in Abbotswood, with a one-year guarantee on every job. Ask us for a quote.
- Leaks that keep coming back after resealing
- Wide, uneven beads that look worse than the old ones
- A second bead peeling off the first
How we handle remedial sealant in Abbotswood
Removing failed sealant is the hardest part of the job. Every layer is cut out, the residue cleaned off and the joint degreased, taking care not to scratch the surfaces around it. Only then can new sealant bond. If you are dealing with sealant that came away because the surface wasn’t prepared and caulk or the wrong sealant used in a wet area, we can put it right, whatever the surface.
Homes around Abbotswood are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: everything old comes out before the new sealant or grout goes in.
All our work is covered by our one-year guarantee.
- Location
- Abbotswood (SO51)
- Region
- Hampshire
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
We keep the work tidy and contained to the joints we are treating, so you can carry on as normal. The job usually takes a few hours for most joints, depending on how much old sealant has to come out, and we tell you how long to leave it before we go. Somewhere as small as Abbotswood, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We protect the surfaces around the joint.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
Ask for a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. Whenever you are ready, phone 0345 464 0079 or send us an email.
Advice
Landlords, agents and businesses in Abbotswood
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
We work for landlords and agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Common questions in Abbotswood
Do you work for hotels and guest houses in Abbotswood?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Do you cover smaller places like Abbotswood?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
How long does the work take?
The number of joints and layers decides it. You’ll have a timescale before any work begins.
Where is Mr Mastic based?
Mr Mastic is based in Crawley. We cover Abbotswood and the rest of Hampshire, along with the rest of our area.
Do you fix expansion and movement joints?
Yes. The depth is set with backing so the sealant only bonds to the two sides.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and we clear up when we are done.
What should I tell you?
Let us know what needs doing and where. We’ll ask anything else we need to know.
What sealant do you use?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Report a tray that rocks or a worktop that lifts
- Don’t wait for a small gap to become a leak
- Run the fan after every shower
- Use a soft cloth, not a scourer, on silicone
Give the new sealant its full cure time: generally around 24 hours, or as long as we advise.
If a joint has failed more than once, stop resealing it. Get the cause found first, otherwise the next attempt will fail too.
Also near Abbotswood
More services for Abbotswood
Remedial sealant around Abbotswood
There are hotels and other places to stay in and around Abbotswood. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Managing a site like Cupernham Infant School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Romsey station, a joint that keeps failing is best fixed properly while the property is empty. In the older streets around St Swithun's Church, walls and floors in older homes can move, and sealant and grout show it first.
Abbotswood is about 1 mile north of Romsey, in Hampshire. If you need remedial sealant in Abbotswood, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We cover Hampshire from our Crawley base, Abbotswood included. Abbotswood is one of 683 towns and villages in Hampshire where we work. We also work in Southampton, around 7 miles away.
Here we cover the SO51 postcode area for remedial sealant. We cover properties on Cupernham Lane, Treviglio Close and Battenberg Close and the roads around them. Nearby, we also carry out remedial sealant in Belbins (1 mile north-west), Braishfield (1 mile north-east), Crampmoor (1 mile east), Gosport (2 miles east) and Lower Slackstead (2 miles north-east). Within a short drive, we also cover Winchester (8 miles north-east), Eastleigh (7 miles south-east), Andover (14 miles north), Totton (6 miles south), Chandler's Ford (5 miles east) and Hedge End (10 miles south-east).
Around Abbotswood
Locally, jobs take us to homes and businesses close to The Dog & Crook pub, The Romsey School and The Romsey School and the streets around them. Abbotswood’s nearest station is Romsey station, about 1.1 miles south of the centre. Other landmarks nearby include King Johns House (1.3 miles south-west) and Romsey Community Hospital (1.1 miles south). Not far away are Emer Bog and Baddesley Common.
Why deal with it now?
Mould under a bead cannot be reached by cleaning. The layers have to come out. In a small place like Abbotswood, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why Abbotswood clients choose us
- Rated 4.9 stars on Google
- Quality sealants from Arbo and Everbuild
- Every job guaranteed for a year
- Sealant colour chosen to suit
Take a look at our cost guide and what customers say.
What affects the quote in Abbotswood
The price is agreed before any work begins. It’s based on:
- The product the joint needs
- The old material and how stubborn it is
- Access and height
- Whether there’s mould to deal with
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs. Call for a quick quote and we will go through it with you.
What to tell us for a quote
When you contact us, it’s useful to know:
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
- Where the property is
- Whether it has been sealed before
For remedial sealant in Abbotswood, phone 0345 464 0079 or email us. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
What the job involves on each surface
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Windows & doors
Some leaks around windows come from the wall or the window itself. If the frame joint is not the cause, we’ll say so.