Kent · England
Westwell Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Westwell, backed by a 12-month guarantee. Ask us for a quote.
- Grout stained black or orange that won’t clean
- Floor grout that will not come clean
- Crumbling grout between the tiles
FAQs for Westwell
Do you work for landlords with property near Charing station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Is Westwell within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
Can you do several jobs on one visit?
Yes, we can. More than one area can be quoted together.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Where do you work from?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
How we handle regrouting in Westwell
Before any work starts, the tiles are checked. If any tiles are loose or sound hollow, we tell you, since new grout cannot fix a problem underneath. With sound tiles, regrouting is a tidy, lasting improvement. We work on tiled floors, wet rooms and kitchen splashbacks, and the jobs we see most are splashback grout that has darkened and crumbling grout between the tiles.
Around Westwell, it’s houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
All of our work is guaranteed for twelve months, in Westwell and everywhere else we cover.
- Location
- Westwell (TN25)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Why it’s worth doing now in Westwell
Patching a few joints can look like a quick win, but the patches often don’t match, and the old grout keeps failing around them. Doing the full area gives you one colour and sound joints throughout. In a small place like Westwell, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first and agree the price before starting.
Why Westwell customers choose us
- Approved under the ARBOMaster scheme
- Full insurance on every job
- A 12-month guarantee on all work
- Anti-fungal silicone where joints get wet
Read what affects the cost and what customers say.
How to look after the new joints
So the new joints stay in good condition:
- Use a soft brush rather than a wire one
- Run the extractor fan during and after a shower
- Give the walls a quick rinse after use
- Don’t use strong acidic cleaners on grout
Use a gentle cleaner on the grout with a soft brush. Keep harsh bleach and acid limescale removers away from it because they wear grout away.
Leaving failed grout can mean tiles come loose. Once that happens, regrouting won’t fix it, so it’s worth acting early.
When to call us in Westwell
Movement behind the tiles cracks grout. That can be a loose tile, a flexing floor or a stud wall, which is why we check the tiles first.
The problems people usually mention when they call include:
- Shower grout that has worn away
- Crumbling grout between the tiles
- Dirty, worn grout on a tiled floor
- Discoloured grout on otherwise sound tiles
Homes close to Church of St Mary include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Comparing quotes
- Whether you can choose the colour
- Which sealant they’ll use, and why
- Who turns up on the day
- What happens if they find a problem under the old sealant
What regrouting looks like in Westwell
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Managing a site like The Hayesbrook School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you let a flat or house near Charing station, stained grout drags a rental down, and regrouting between lets puts that right.
Westwell is about 4 miles north of Ashford, in Kent. Wherever you are in the TN25 postcode area, we can carry out regrouting at your property. Our Kent coverage runs to 922 places, Westwell among them. You can also see our page for Chelmsford, about 41 miles away.
Work in TN25 works the same way as everywhere else we cover. We also cover Tutt Hill (1 mile south-west), Ram Lane (1 mile west), Potters Corner (1 mile south), Westwell Leacon (2 miles west) and Hothfield (2 miles south-west). We also work in nearby towns such as Maidstone (15 miles west), Ashford (4 miles south), Canterbury (12 miles north-east), Sittingbourne (11 miles north-west), Whitstable (14 miles north-east) and Faversham (9 miles north).
Landmarks near Westwell
The closest station to Westwell is Charing station, roughly 2.6 miles north-west. Nearby you will also find County Square (3.2 miles south) and William Harvey Hospital (4.6 miles south-east).
What else we do in Westwell
What we can’t put right
It helps to know what we can’t do too:
- Water coming from plumbing rather than grout
- Tiles that have come away from the wall
- Waterproofing that has failed below the tiling
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think before you book.
Surfaces we seal
- Wet rooms
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles
- Shower walls
- Bathroom floors
How the visit works
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours, or longer for a fully tiled room. In a small place like Westwell, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- We fill the joints with new grout, then clean the tiles.
- We reseal the internal corners and edges with silicone.
Before we arrive
- Mention any tricky access
- Try not to wet indoor joints just before the visit
- Tell us about any water getting in
Getting a quote
For a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Read more
How we quote for regrouting
There’s no set price list. What we look at:
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- Mould in or behind the old joints
- The type of sealant required
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or drop us an email and we’ll talk you through it.
What we need to know
To help us quote quickly, please include:
- The address or postcode of the job
- The rough size of the job
- Photos by email, if that’s easy
- If it’s domestic, commercial or a hotel
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.