Kent · England
Regrouting in St Mary's Bay, Kent
Raking out old, cracked or stained grout and regrouting tiled walls and floors for householders, landlords and businesses in St Mary's Bay. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Kitchen splashback grout stained by grease
- Floor grout that has worn and darkened
- Discoloured grout on otherwise sound tiles
Regrouting for homes and businesses in St Mary's Bay
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Either way, tiled areas in St Mary's Bay are handled the same careful way. We work on kitchen splashbacks, bathroom wall tiles and wet rooms, and people most often call us about splashback grout that has darkened and good tiles let down by tired grout.
Smaller places like St Mary's Bay still have plenty of bathrooms that work hard every day. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Where
- St Mary's Bay (TN29)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Regrouting around St Mary's Bay
St Mary's Bay is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Managing a site like The Marsh Academy? Then we reseal washrooms and kitchens in schools and businesses as well as homes. In the older streets around All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
St Mary's Bay is about 6 miles south-west of Hythe, in Kent. Whether you are in the middle of St Mary's Bay or further out, we cover regrouting for every kind of property, from flats and houses to offices and hotels. We cover 922 towns and villages across Kent, large and small. There’s also a page for Brighton, roughly 50 miles from St Mary's Bay.
All of TN29 is covered for regrouting. Whether your property is on Maple Drive, Oak Drive and Beechwood Close or anywhere close by, we can help. We also cover the places around St Mary's Bay: St Mary in the Marsh (1 mile west), Burmarsh (3 miles north), Newchurch (3 miles north-west), Postling Green (5 miles north) and Bonnington (6 miles north). Within a short drive, we also cover Ashford (10 miles north-west), Folkestone (10 miles north-east), Hythe (6 miles north-east), Hawkinge (11 miles north-east), Tenterden (13 miles west) and Cheriton (9 miles north-east).
What’s near St Mary's Bay
We work in homes and buildings around Romney Warren Country Park. Nearby you will also find Romney 'castle' (3.6 miles west).
Places near St Mary's Bay
More services for St Mary's Bay
Leave it or put it right?
Grout pens and paint-on colourants only cover the surface. They do not fill cracks or stop water, and stains can show through again. Raking out and regrouting replaces the grout itself. Homes in smaller places like St Mary's Bay can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Combining jobs into one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why St Mary's Bay clients choose us
- Arbo and Everbuild products
- Neat joints and a tidy finish
- A 12-month guarantee on all work
- Homes, businesses and hotels
Read how sealant jobs are priced and customer reviews.
What affects the cost of regrouting
Call for a quick quote. The main things that affect it are:
- The type of sealant required
- Whether the work is at height
- The number and length of the joints
- The old material and how stubborn it is
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What we need to know
When you contact us, it’s useful to know:
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- The type of property
- Access, such as stairs, a lift or height
Want a quote for regrouting? Please phone 0345 464 0079 or drop us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
The process
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the work takes a few hours, or longer for a fully tiled room for a typical job. Parking around St Mary's Bay is generally easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
How to prepare
- Mention any sign-in or site rules at work premises
- Mention if the joints have been sealed before
- Move anything stored near the joints
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you are ready, call 0345 464 0079 or drop us an email.
Read more
St Mary's Bay questions
Is there a guarantee on regrouting in St Mary's Bay?
All our work, in St Mary's Bay and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you do regrouting in St Mary's Bay?
Yes. Our work covers London and the South East, and St Mary's Bay is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear quote.
Do you reseal at the same time?
In most cases, yes. The corners and edges should be silicone, and it makes sense to renew both together.
How long should I wait before showering?
The wait depends on the materials and how warm the room is. We will give you a time to follow at the end of the visit.
Can you regrout if a few tiles are loose?
Loose tiles need refixing before regrouting. We’ll point them out before any grout comes out.
Are you fully insured?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Will there be a smell?
That depends on the sealant. Some products have a noticeable smell, others very little.
Do you remove the old sealant?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Surface by surface
Wet rooms
New grout in a wet room keeps the surface sound. It doesn’t repair failed tanking underneath.
Kitchen splashbacks
We can regroute a splashback with the kitchen left in place. The joint along the worktop is resealed with silicone.
When it is not the sealant
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Water coming from plumbing rather than grout
- A structure that flexes behind the tiles
- Loose tiles, which need refixing first
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Wet rooms
- Tiled floors
- Bathroom wall tiles
- Bathroom floors
- Kitchen splashbacks
- Shower walls
Work for landlords, hotels and businesses
We work for letting agents and landlords as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Keeping the joints in good condition
Simple care keeps the joints in good condition. Our advice:
- Keep an eye on the silicone along the edges
- Run the extractor fan during and after a shower
- Do not ignore a tile that feels loose
- Give the walls a quick rinse after use
Give the new grout the time we tell you before using the shower, so it cures fully. From then on, a quick rinse after showering helps and let the room air.
Tiles can come away if failed grout is left. Once that happens, regrouting will not fix it so early action pays.