Essex · England
Nounsley Regrouting
We cover Nounsley for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Floor grout that has worn and darkened
- Cracked or crumbling grout lines
- Grout in corners that has cracked
About our regrouting in Nounsley
Grout fills the gaps between tiles, and sealant is what goes along the bath, tray or worktop. When grout cracks or washes out, water has a way in behind the tiling. Our job is to rake it out and put new grout in and renew the silicone at the edges. If you’re dealing with shower grout that has worn away and grout stained black or orange that won’t clean, we can put it right, whatever the surface.
In a village or hamlet like Nounsley, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
We stand behind the work with a 12-month guarantee.
- Where
- Nounsley (CM3)
- Region
- Essex
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026

Nounsley questions
I let a flat near Hatfield Peverel station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.
Do you cover Nounsley for regrouting?
Yes, Nounsley is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.
Will the sealant be renewed as well as the grout?
Most of the time, yes. Grout fills tile gaps and sealant handles the moving joints, so we renew both and it’s all in the quote.
Where is Mr Mastic based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you take out the old sealant first?
Yes, every time. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Can new sealant go over the old?
No. The old sealant always comes out first, so the new sealant bonds properly.
What we are called out for in Nounsley
Soap scum and limescale build up on grout that is hard to shift. The grout beneath can stain and weaken, which is when replacing it makes sense.
Any of these means the joints need attention:
- Grout washed out of a shower
- Grout that stays dark however much it’s cleaned
- Floor grout that will not come clean
- Crumbling grout between the tiles
Homes close to Parish Church of St Andrew include some older properties, and walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- What happens if they find a problem under the old sealant
- What the cure time is
- Is VAT in the price?
- Whether they’re fully insured
Nounsley homes and their sealant
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Schools such as Hatfield Peverel Infant School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Hatfield Peverel station, stained grout drags a rental down, and regrouting between lets puts that right.
Nounsley is about 3 miles south-west of Witham, in Essex. Jobs in Nounsley get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Nounsley is one of 644 places in Essex where we work for regrouting. You can also see our page for Chelmsford, roughly 6 miles from Nounsley.
Every address in CM3 is within our area for regrouting. That includes homes and businesses on Priory Mews, Ulting Road and Priory Farm Road. Nearby, we also carry out regrouting in Ulting (1 mile south), Woodham Walter (2 miles south), Langford (2 miles east), Curling Tye Green (2 miles south-east) and Wickham Bishops (3 miles east). Larger places within reach include Colchester (15 miles north-east), Chelmsford (6 miles west), Basildon (15 miles south-west), Braintree (8 miles north), Maldon (4 miles south-east) and Billericay (12 miles south-west).
What’s near Nounsley
Around Nounsley, our work takes us to homes and buildings near Maltings Academy and The Sportsmans Arms, among other places. For rail, the closest station is Hatfield Peverel station, about 1.3 miles north-west of the centre. Well-known places in the area include Priory Hospital (5.3 miles west). The countryside around Nounsley includes Danbury Ridge Nature Reserves.
What we can’t put right
A few problems are outside what sealant work can do:
- Leaks from pipes, valves or wastes (a plumber’s job)
- Movement in a stud wall or floor
- A leaking wet room membrane
If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.
Joints and surfaces we work on
- Wet rooms
- Kitchen splashbacks
- Shower walls
- Tiled floors
- Bathroom floors
- Bathroom wall tiles
What happens on the day
The work is kept neat and contained to the area we are working on, so you can get on with your day. Expect the work to take anything from a few hours to a full day, depending on the area, and we explain the cure time before we leave. For a village or hamlet like Nounsley, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We check the tiles are sound and flag any that are loose or hollow.
- We rake out the old grout to an even depth, taking care of the tile edges.
- We vacuum the joints and clean out the dust.
- New grout is worked into the joints and cleaned off the tile faces.
- Corners and edges are resealed with flexible silicone, not grout.
How to prepare
- Clear items away from the joints we are working on
- Keep pets and children clear of the area while we work
- Tell us if parking is tricky
Get a quote
If you are in Nounsley and need regrouting, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before we start.
Related advice
Nearby places to Nounsley
More services for Nounsley
Quotes for regrouting in Nounsley
We don’t publish a price list. The quote depends on:
- The number and length of the joints
- Which sealant suits the joint
- Access and height
- When we can work, for business premises
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and give you a clear price before any work starts.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- If someone has resealed it before
- Photos by email, if that’s easy
- How many joints, rooms or windows are involved
- The type of property
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work.
How the job changes by surface
Kitchen splashbacks
We can regroute a splashback with the kitchen left in place. The joint along the worktop is resealed with silicone.
Corners and edges
Where tiles meet a bath, tray or worktop, the joint is sealed. Grout in that joint wouldn’t last.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Skip wire brushes and scourers
- Check the corner silicone every few months
- Keep the fan on after showering
- Do not ignore a tile that feels loose
We’ll tell you when the area can be used again. Please follow it, and avoid scrubbing the new grout hard for the first few days.
Stains that won’t clean are a sign the grout is breaking down. At this point it’s a simple regrout while the tiles are still sound.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
