East Sussex · England
Milton Street Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors in Milton Street, with a 12-month guarantee on every job. Call for a quick quote.
- A grout colour that no longer suits the room
- Grout washed out of a shower
- Greasy, stained grout behind the hob
Leave it or put it right?
Once grout cracks, water can get behind the tiling. Left alone, that water can loosen tiles or damage the wall, and then you are looking at retiling. Dealing with it now keeps it small. Around Milton Street, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why choose Mr Mastic in Milton Street
- We leave the area clean and tidy
- Anti-fungal sanitary silicone in wet areas
- We never seal over old sealant
- Over 20 years’ experience
Take a look at what affects the cost or what customers say.
Regrouting in Milton Street, done properly
When grout stays dark however much you clean it, the stain is often in the grout itself. New grout is the fix that lasts and you can pick a different colour while you are at it. Common call-outs are for gaps where the shower grout has gone and floor grout that has worn and darkened, across kitchen splashbacks, tiled floors and bathroom wall tiles.
Somewhere as small as Milton Street, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Movement in older walls and floors tends to show first as cracked grout or split sealant.
You are covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or drop us an email.
- Where
- Milton Street (BN26)
- Wider area
- East Sussex
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Bathrooms and kitchens in Milton Street
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings. There are hotels and other places to stay in and around Milton Street. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Managing a site like Alfriston School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Berwick (Sussex) station, a regrout while the flat is empty is quicker than working around a tenant. If you live in an older home near St Mary and St Peter's Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Milton Street is about 4 miles north-east of Seaford, in East Sussex. Across the BN26 area, our applicators can take on regrouting. Milton Street is one of 289 towns and villages in East Sussex where we work for regrouting. You can also see our page for Brighton, roughly 13 miles from Milton Street.
Every address in BN26 is covered for regrouting, from the main roads to the quietest streets. Neighbouring places we cover for regrouting include Wilmington (1 mile north-east), Winton (1 mile west), Alfriston (1 mile south-west), Lullington (1 mile south-west) and Dukes Green (1 mile south-west). We also work in nearby towns such as Eastbourne (5 miles south-east), Bexhill-on-Sea (13 miles east), Seaford (4 miles south-west), Lewes (9 miles north-west), Hailsham (5 miles north-east) and Uckfield (11 miles north).
What’s near Milton Street
Around Milton Street, our work takes us to homes and buildings near The Sussex Ox pub, among other places. The nearest railway station is Berwick (Sussex) station, about 1.8 miles north. Well-known places in the area include Eastbourne District General Hospital (4.4 miles south-east) and Burlough Castle (under half a mile north-west). The countryside around Milton Street includes Combe Hill.
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
What we do, step by step
Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a few hours, or longer for a fully tiled room, and the area is left clean. Somewhere like Milton Street needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Preparing for the visit
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
- Let us know about earlier repairs to the joints
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. Whenever you are ready, ring 0345 464 0079 or drop us an email.
Advice
Surface by surface
Bathroom wall tiles
Whole bathroom walls can be regrouted in one visit or more, depending on size. You can change the colour at the same time.
Shower walls
A shower wall is soaked daily, so its grout takes the most punishment. It generally fails first.
Places near Milton Street
What else we do in Milton Street
Milton Street questions
Do you work for landlords with property near Berwick (Sussex) station?
Yes, we work for landlords and letting agents. Just call 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Do you take on hotel work around Milton Street?
Yes, hospitality work, including hotels, is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Do you come to Milton Street?
Yes. From our base in Crawley, we cover South East England, London and all of Scotland.
Should corners be grouted or sealed?
Silicone. Grout belongs between the tiles and moving joints need sealant.
Do you regrout part of a bathroom, like the shower?
Yes. Many jobs are just the shower walls, or just the joints that have failed.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Do you have insurance?
Yes. Full insurance covers our work.
Do the sealants smell?
That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.
What affects the cost of regrouting
Jobs vary more than people expect. The main factors:
- The number and length of the joints
- Any mould that needs treating
- How many areas need sealing
- Which sealant suits the joint
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts, so you know where you stand.
Helping us quote
Before you ask for a quote, have a think about:
- What the problem is, such as mould, gaps, leaks or cracking
- The type of property
- The rough size of the job
- Any access issues, like height or stairs
To get a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You will have a clear quote before any work starts.
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- A leaking wet room membrane
- Damaged tiles that need replacing
- Leaks from pipes, valves or wastes (a plumber’s job)
If you are not sure, just phone 0345 464 0079 or email us and we will give you a straight answer before booking.
Where we work in Milton Street
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles
- Wet rooms
- Shower walls
- Bathroom floors
Aftercare tips
So the new joints stay in good condition:
- Get any tile that moves checked promptly
- Avoid neat bleach and strong acid descalers on grout
- Rinse the tiles after showering
- Use gentle cleaners on grout
Clean the grout with a mild bathroom cleaner with a soft brush. Keep harsh bleach and acid limescale removers away from it, as they can break grout down.
Stains that will not clean are a sign the grout is breaking down. Regrouting at this stage is straightforward while the tiles are still sound.