Essex · England
Regrouting in Hare Street, Essex
We cover Hare Street for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.
- Grout in corners that has cracked
- Grout that stays dark however much it’s cleaned
- Greasy, stained grout behind the hob
Regrouting in Hare Street, done properly
Stained, crumbling or cracked grout can make a sound bathroom look tired. With regrouting, the tiles stay and only the grout is renewed, so nothing is ripped out. We work on wet rooms, kitchen splashbacks and shower walls, and people most often call us about grout washed out of a shower and grout in corners that has cracked.
Homes around Hare Street are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Your job is guaranteed for a year, as with all our work.
- Place
- Hare Street (CM5)
- Region
- Essex
- Guarantee
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026

What we can’t put right
It helps to know what we cannot do:
- A leaking wet room membrane
- Loose tiles, which need refixing first
- Leaks from pipes, valves or wastes (a plumber’s job)
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly.
Surfaces we seal
- Wet rooms
- Bathroom floors
- Shower walls
- Kitchen splashbacks
- Tiled floors
- Bathroom wall tiles
Signs you need regrouting in Hare Street
A poor original job is a common cause. Grout that was too wet, not packed in or cleaned off too hard tends to wash out early.
Any of these means the joints need attention:
- Dirty, worn grout on a tiled floor
- Grout in a colour the owner wants to change
- Splashback grout that has darkened
- Discoloured grout on otherwise sound tiles
In the older streets around Church of St Margaret of Antioch, walls and floors in older homes can move, and sealant and grout show it first.
What your quote should include
- How the surfaces are prepared before sealing
- What guarantee comes with the work
- Whether the sealant suits the joint
- How long to leave it before use
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Also near Hare Street
Other services in Hare Street
What affects the quote in Hare Street
Every job gets its own quote. This is what makes a difference:
- The size of the job
- Whether the work is at height
- Any working-time requirements on site
- The product the joint needs
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Call for a quick quote and we will explain what it covers.
Asking for a quote
When you call or email, these details help:
- Pictures of the joints, sent by email
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
- What’s wrong with the joints now
For a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Regrouting in Hare Street: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In and around Hare Street, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Hare Street is about 5 miles north-west of Brentwood, in Essex. Wherever you are in the CM5 postcode area, we cover regrouting for homes and businesses. Hare Street is one of 644 towns and villages in Essex we cover. For nearby work, see our Chelmsford page.
Every address in CM5 is covered for regrouting, from the main roads to the quietest streets. If you’re just outside Hare Street, we cover Little End (1 mile north-east), Stanford Rivers (1 mile north), Clatterford End (1 mile north-west), Marden Ash (2 miles north-east) and Navestock Heath (2 miles south). Further out, we also cover Chelmsford (12 miles east), Basildon (13 miles south-east), Harlow (8 miles north-west), Brentwood (5 miles south-east), Billericay (9 miles east) and Loughton (7 miles west).
Around Hare Street
Around Hare Street, our work takes us to homes and buildings near The Woodman Public House, among other places. Well-known places in the area include St. Margaret's Hospital (4.6 miles north-west). For a walk, there’s Gernon Bushes.
Leave it or put it right?
Cleaning products may brighten grout for a time, but stains and mould that have soaked in tend to return. New grout, with silicone in the corners, deals with the cause. In a small place like Hare Street, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or send us an email and we’ll talk you through it.
Why Hare Street customers choose us
- Anti-fungal silicone where joints get wet
- Approved under the ARBOMaster scheme
- Rated 4.9 stars on Google
- We never seal over old sealant
See what affects the cost and our reviews.
FAQs for Hare Street
Is regrouting in Hare Street guaranteed?
All our work, in Hare Street and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Will you come out to Hare Street?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is it OK to seal over old sealant?
No, because it fails. The old sealant always comes out first, so the new sealant bonds properly.
Can you regrout if a few tiles are loose?
Loose tiles need refixing before regrouting. We will point them out before any grout comes out.
Will the sealant be renewed as well as the grout?
Most of the time, yes. Grout and sealant do different jobs, so we renew both and it’s all in the quote.
When can I use the shower again?
Before we leave, we’ll tell you how long to wait. The grout and sealant both need to cure before the shower is used.
Are you fully insured?
Yes. We’re fully insured, with over 20 years’ experience in sealant work.
Will it make a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Look at the sealant in the corners now and then
- Avoid neat bleach and strong acid descalers on grout
- Rinse the tiles after showering
- Keep the fan on after showering
Leave the area unused for as long as we advise, so it cures fully. After that, rinse the tiles after showering and keep the room ventilated.
Once grout cracks, it tends to get worse. Water gets behind the tiles, and they can begin to come away, so regrouting early can save a retile.
The process
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours, or longer for a fully tiled room. Somewhere like Hare Street needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- Silicone goes into the corners and along the edges.
How to prepare
- Mention any sign-in or site rules at work premises
- Let us know about earlier repairs to the joints
- Let us know if you’ve seen damp or leaks
Ask for a quote
Every job is quoted individually. Simply ring 0345 464 0079 or email us and describe the job, and pictures are welcome.
