Kent · England
Regrouting in Fairseat, Kent
Tiled areas in Fairseat need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Grout stained black or orange that will not clean
- Grout that makes sound tiles look old
- Floor grout that won’t come clean
Landlords, agents and businesses in Fairseat
We also work for property managers and facilities teams in Fairseat and across Kent. We can quote a run of properties together, and we’re fully insured.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
Regrouting in Fairseat
Grout fills the gaps between tiles, and sealant is what goes along the bath, tray or worktop. Once grout starts to crack or wash away, water can get in behind the tiles. Our job is to rake it out and put new grout in and renew the silicone at the edges. If you are dealing with corners filled with grout instead of silicone and kitchen splashback grout stained by grease, we can put it right, whatever the surface.
For a small place like Fairseat, regrouting is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Our work is backed for twelve months.

- Where
- Fairseat (TN15)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Use a squeegee on the tiles after showering
- Use a soft brush rather than a wire one
- Stick to mild products for cleaning grout
- Check the corner silicone every few months
If a tile starts to feel loose, get it looked at early. A loose tile cracks the grout around it and lets water in.
Once grout cracks, it tends to get worse. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.
Fairseat questions
Do you work for landlords with property near Borough Green & Wrotham station?
Yes, landlords and agents are among the people we work for. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Will you come out to Fairseat?
Yes, Fairseat is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Where is Mr Mastic based?
We’re a Crawley-based firm. We work across South East England, London and Scotland.
What guarantee comes with the work?
There’s a 12-month guarantee on every job, including regrouting.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Is it OK to seal over old sealant?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Nearby places to Fairseat
What else we do in Fairseat
What happens on the day
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a shower enclosure, longer for a whole room. For a village or hamlet like Fairseat, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- The joints are cleaned out and vacuumed.
- We grout the joints and wipe the tiles clean.
- We renew the silicone at the corners and edges.
How to prepare
- Let us know about parking restrictions
- Move anything stored near the joints
- Let us know about stairs, lifts or work at height
How to get a quote
If you are in Fairseat and need regrouting, call 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Advice
Different surfaces, different methods
Shower walls
A shower wall is soaked daily, so its grout takes the most punishment. It’s often the first place grout washes out.
Wet rooms
Wet rooms have water across the floor, so good grout is important. We check for loose tiles before starting.
Leave it or put it right?
New grout smeared over the old does not bond well. A thin skin on top tends to break off, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Where a wall is exposed, as many are in small places like Fairseat, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why book with us
- An ARBOMaster approved applicator
- More than 20 years in sealant work
- We never seal over old sealant
- We leave the area clean and tidy
Read our cost guide and our reviews.
Bathrooms and kitchens in Fairseat
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you look after a building such as Wrotham School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For an older house near a landmark such as Holy Innocents, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Letting a property close to Borough Green & Wrotham station? Then stained grout drags a rental down, and regrouting between lets puts that right.
Fairseat is about 7 miles north-east of Sevenoaks, in Kent. Across the TN15 area, our applicators can take on regrouting. Fairseat is one of 922 places in Kent where we work. We also work in London, around 22 miles away.
Here we cover the TN15 postcode area for regrouting. You’ll find streets such as Vigo Road and Platt House Lane, all of which we cover. Close by, we work in Hodsoll Street (1 mile north), Labour-in-vain (1 mile south-west), Culverstone Green (1 mile north-east), Trottiscliffe (1 mile south-east) and Vigo Village (1 mile east). Further out, we also cover Maidstone (10 miles south-east), Dartford (9 miles north-west), Sevenoaks (7 miles south-west), Royal Tunbridge Wells (14 miles south), Gravesend (7 miles north) and Tonbridge (9 miles south).
Near you in Fairseat
Locally, jobs take us to homes and businesses close to Trosley Country Park, among other places. For rail, the closest station is Borough Green & Wrotham station, roughly 2.6 miles south. Other landmarks nearby include Ightham Court (2.9 miles south-west) and Coldrum Long Barrow (2 miles east).
What sealant work can’t fix
To be straight with you, there are a few things sealant won’t fix:
- A leaking shower valve or waste
- A floor or wall that keeps moving
- Waterproofing that has failed below the tiling
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Bathroom wall tiles
- Wet rooms
- Kitchen splashbacks
- Shower walls
- Tiled floors
- Bathroom floors
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
